Detection of cytomegalovirus DNA in human specimens by LightCycler PCR: melting point analysis is mandatory to detect virus strains with point mutations in the target sequence of the hybridization probes.
Ontology highlight
ABSTRACT:
SUBMITTER: Schaade L
PROVIDER: S-EPMC88443 | biostudies-literature | 2001 Oct
REPOSITORIES: biostudies-literature
Publications
Detection of cytomegalovirus DNA in human specimens by LightCycler PCR: melting point analysis is mandatory to detect virus strains with point mutations in the target sequence of the hybridization probes.
Schaade L L Kockelkorn P P Ritter K K Kleines M M
Journal of clinical microbiology 20011001 10
Similar Datasets
Project description:Detection of human cytomegalovirus (CMV) DNA in clinical specimens is considered a cornerstone in the diagnosis of CMV disease. The aim of this study was to evaluate a newly designed LightCycler-based quantitative CMV PCR. Specimens of human origin (n = 200) were tested using the LightCycler PCR, the quantitative COBAS AMPLICOR CMV MONITOR (CACM) assay, and a qualitative in-house PCR assay for the presence of CMV DNA. Samples that were reactive in at least two of the three assays were considered CMV DNA positive (n = 95 [47. 5%]), while samples that were nonreactive in two of the three assays were considered CMV DNA negative (n = 105 [52.5%]). Using the LightCycler assay, CMV DNA was detected in 91 of the 95 CMV DNA-positive human specimens (sensitivity, 95.8%; 95% confidence interval [CI], 89.6 to 98.8) and in 1 of the CMV DNA-negative specimens (specificity, 99%; 95% CI, 94.8 to 99.8). Results of CMV load determination as assessed by both quantitative test systems were correlated (r = 0.73; P < 0.0001; 95% CI, 0.61 to 0.81). Results for undiluted samples containing a high CMV load were more accurate with the LightCycler test than were results obtained with the CACM test, which underestimated the viral load of samples containing high DNA copy numbers. The high level of sensitivity, specificity, accuracy, and rapidity provided by the LightCycler technology are favorable for the use of this system in the detection of CMV DNA in clinical specimens.
| S-EPMC87533 | biostudies-literature
Project description:We developed a rapid thermocycling, real-time detection (also known as real-time PCR) method for the detection of Legionella species directly from clinical specimens. This method uses the LightCycler (Roche Molecular Biochemicals, Indianapolis, Ind.) and requires approximately 1 to 2 h to perform. Both a Legionella genus PCR assay and Legionella pneumophila species-specific PCR assay were designed. A total of 43 archived specimens from 35 patients were evaluated, including 19 bronchoalveolar lavage (BAL) specimens and 24 formalin-fixed, paraffin-embedded open lung biopsy specimens. Twenty-five of the specimens were culture-positive for Legionella (9 BAL specimens and 16 tissue specimens). BAL specimens were tested by LightCycler PCR (LC-PCR) methods and by a direct fluorescent antibody (DFA) assay, which detects L. pneumophila serogroups 1 to 6 and several other Legionella species. Tissue sections were tested by the two LC-PCR methods, by DFA, by an in situ hybridization (ISH) assay, specifically designed to detect L. pneumophila, and by Warthin-Starry (WS) staining. The results were compared to the "gold standard" method of bacterial culture. With BAL specimens the following assays yielded the indicated sensitivities and specificities, respectively: Legionella genus detection by Legionella genus LC-PCR, 100 and 100%; Legionella genus detection by DFA assay, 33 and 100%; and L. pneumophila detection by L. pneumophila species-specific LC-PCR, 100 and 100%. With open lung biopsy specimens the following assays yielded the indicated sensitivities and specificities, respectively: Legionella genus detection by LC-PCR 68.8 and 100%; Legionella genus detection by DFA assay, 44 and 100%; Legionella genus detection by WS staining, 63 and 100%; L. pneumophila species-specific detection by LC-PCR, 17 and 100%; and L. pneumophila species-specific detection by ISH, 100 and 100%. The analytical sensitivity of both LC-PCR assays was <10 CFU/reaction. LC-PCR is a reliable method for the direct detection of Legionella species from BAL specimens. The Legionella genus LC-PCR assay could be performed initially; if positive, L. pneumophila species-specific LC-PCR could then be performed (if species differentiation is desired). The speed with which the LC-PCR procedure can be performed offers significant advantages over both culture-based methods and conventional PCR techniques. In contrast, for the methods evaluated, culture was the best for detecting multiple Legionella species in lung tissue. WS staining, Legionella genus LC-PCR, and L. pneumophila species-specific ISH were useful as rapid tests with lung tissue.
| S-EPMC88195 | biostudies-literature
Project description:Thirty cytomegalovirus cell culture-positive samples were tested by the SHARP Signal System. Twenty-seven specimens (100% agreement) were identified by both methods. The SHARP Signal System is rapid (4 h), easy to perform, and potentially adaptable to automation.
| S-EPMC228628 | biostudies-other
Project description:The development of a novel normalized quantitative competitive real-time PCR on the LightCycler instrument (NQC-LC-PCR) and its application to the quantification of cytomegalovirus (CMV) DNA in clinical samples are described. A heterologous competitor DNA was spiked into test samples and served as an internal amplification control. The internal control (IC) DNA in the test samples was coamplified with the CMV DNA and was tested against a calibrator sample that contained equal amounts of IC DNA and CMV reference standard DNA. An algorithm was developed to normalize possible varying amplification efficiencies between the standard and the samples. After normalization, CMV DNA copy numbers were determined in absolute terms. In a routine clinical setting, normalized quantification by NQC-LC-PCR using a single IC concentration led to results ranging from 500 to 50,000 CMV DNA copies/ml. The results obtained with conventional real-time quantification on the LightCycler instrument were almost identical to those obtained with the NQC-LC-PCR-based quantification. This was the case only for samples in which the PCR was not inhibited. With partially inhibited samples, NQC-LC-PCR was still able to correctly quantify CMV DNA copy numbers even when the PCR was inhibited by about 70%. By analyzing 80 undefined clinical samples, we found that NQC-LC-PCR was suitable for the routine assessment of CMV DNA in clinical plasma samples. Since the ICs were already added to the samples during the DNA purification, almost the entire assay was controlled for sample adequacy. Thus, false negative results were precluded. The NQC-LC-PCR approach developed should be adaptable for additional microbiological applications.
| S-EPMC154596 | biostudies-literature
Project description:A rapid real-time multiplex PCR assay for detecting and differentiating Bordetella pertussis and Bordetella parapertussis in nasopharyngeal swabs was developed. This assay (LC-PCR-IS) targets the insertion sequences IS481 and IS1001 of B. pertussis and B. parapertussis, respectively, and is performed using the LightCycler (Roche Molecular Biochemicals, Indianapolis, Ind.). The analytical sensitivity is less than one organism per reaction. Results for Bordetella culture and/or direct fluorescent antibody testing and a second LightCycler PCR assay (target, pertussis toxin gene) were compared to results of the LC-PCR-IS assay for 111 nasopharyngeal swabs submitted for pertussis testing. Of the specimens, 12 were positive (9 B. pertussis and 3 B. parapertussis) and 68 specimens were negative by all methods. Three other specimens were positive for B. pertussis by at least two of the methods (including the LC-PCR-IS assay), and another 28 specimens were positive for B. pertussis by the LC-PCR-IS assay only. No specimens were negative by the LC-PCR-IS assay and positive by the other methods. A conventional PCR method (target, IS481) was also compared to the LC-PCR-IS assay for a different group of nasopharyngeal swab specimens (n = 96): 44 specimens were positive and 41 specimens were negative for B. pertussis with both PCR methods. Nine specimens were positive for B. pertussis by the LC-PCR-IS assay and negative by the conventional PCR assay, and two specimens were positive for B. pertussis by the conventional PCR assay and negative by the LC-PCR-IS assay. Positivity of the two assays was not significantly different (P = 0.0654). The insertion sequence IS481 is also present in Bordetella holmesii; specimens containing B. holmesii may yield false-positive results. The LC-PCR-IS assay takes approximately 45 min to complete post-nucleic acid extraction, compared to 24 h for the conventional PCR assay previously used in our laboratory. The LC-PCR-IS assay is easier to perform than the conventional PCR assay, and the closed system decreases the chance of contamination. All of these characteristics represent a significant improvement in the detection of B. pertussis and B. parapertussis in nasopharyngeal specimens.
| S-EPMC120124 | biostudies-literature
Project description:In order to evaluate the LightCycler-based PCR (LC-PCR) as a diagnostic assay technique, a classical pp65 antigenemia assay and the commercially available COBAS Amplicor CMV Monitor (CACM) assay were compared to the LC-PCR assay for the detection and quantitation of cytomegalovirus (CMV) load in 404 parallel specimens of peripheral blood from 66 patients after solid organ transplantation. A good correlation existed among these three assays (r congruent with 0.6, P < 0.0001). The LC-PCR assay was the most sensitive (54% of specimens positive) compared to the CACM (48.6%) and the pp65 antigenemia (26%) assays. The LC-PCR assay detected all samples found positive by using both the CMV pp65 antigenemia assay and the CACM assay. The LC-PCR also had the widest dynamic range (from 250 to 10(7) DNA copies/ml of plasma). No cross-reactions were found among CMV and Epstein-Barr virus, varicella-zoster virus, or herpes simplex virus in the LC-PCR by using amplification with specifically designed primer pairs. Precision, expressed as the coefficient of variation, was <3% with standard DNA from cell cultures and between 6.55 and 14.1% with clinical specimens in repeat LC-PCR runs. One run of the LC-PCR took half of the time required for the semiautomated CACM procedure. Because of its sensitivity, specificity, cost-effectiveness, and simplicity, the LC-PCR assay could replace the pp65 antigenemia and the CACM assays as the preferred technique for the surveillance, diagnosis, and monitoring of response of CMV diseases in high-risk populations.
| S-EPMC165361 | biostudies-literature
Project description:Since its development, microarray technology has evolved to a standard method in the biotechnological and medical field with a broad range of applications. Nevertheless, the underlying mechanism of the hybridization process of PCR-products to microarray capture probes is still not completely understood, and several observed phenomena cannot be explained with current models. We investigated the influence of several parameters on the hybridization reaction and identified ssDNA to play a major role in the process. An increase of the ssDNA content in a hybridization reaction strongly enhanced resulting signal intensities. A strong influence could also be observed when unlabeled ssDNA was added to the hybridization reaction. A reduction of the ssDNA content resulted in a massive decrease of the hybridization efficiency. According to these data, we developed a novel model for the hybridization mechanism. This model is based on the assumption that single stranded DNA is necessary as catalyst to induce the hybridization of dsDNA. The developed hybridization model is capable of giving explanations for several yet unresolved questions regarding the functionality of microarrays. Our findings not only deepen the understanding of the hybridization process, but also have immediate practical use in data interpretation and the development of new microarrays.
| S-EPMC4099319 | biostudies-literature
Project description:We developed a rapid, sensitive, and reproducible assay to quantify Candida albicans ACT1, CDR1, CDR2, ERG11, and MDR1 mRNA using a two-step reverse transcription and LightCycler real-time PCR (RT-LightCycler PCR) method with sequence-specific hybridization probes. We compared RT-LightCycler PCR with Northern hybridization for quantitative analysis of gene expression in isolates with various fluconazole susceptibilities. Specificity of each LightCycler PCR was verified by LightCycler melting curve analysis and agarose gel electrophoresis of amplified products. Correlation of quantification results between RT-LightCycler PCR and Northern hybridization yielded correlation coefficients of > or = 0.91 for all genes except MDR1 (0.74). In this case, reduced correlation was due to the inability of Northern hybridization to accurately quantify the high MDR1 expression in a susceptible dose-dependent isolate which was shown by RT-LightCycler PCR to overexpress MDR1 >200-fold relative to the other isolates tested. In four isolates, low levels of CDR2 mRNA were detected by RT-LightCycler PCR but were undetectable by Northern hybridization. mRNA quantification by RT-LightCycler PCR correlates with Northern hybridization and offers additional advantages, including increased sensitivity and speed of analysis, along with lower RNA concentration requirements and an increased dynamic range of signal detection.
| S-EPMC404661 | biostudies-literature
Project description:A procedure based on panfungal PCR and multiplex liquid hybridization was developed for the detection of fungi in tissue specimens. The PCR amplified the fungal internal transcribed spacer (ITS) region (ITS1-5.8S rRNA-ITS2). After capture with specific probes, eight common fungal pathogens (Aspergillus flavus, Aspergillus fumigatus, Candida albicans, Candida krusei, Candida glabrata, Candida parapsilosis, Candida tropicalis, and Cryptococcus neoformans) were identified according to the size of the amplification product on an automated sequencer. The nonhybridized products were identified by sequencing. The performance of the procedure was examined with 12 deep-tissue specimens and 8 polypous tissue biopsies from the paranasal sinuses. A detection level of 0.1 to 1 pg of purified DNA (2 to 20 CFU) was achieved. Of the 20 specimens, PCR was positive for 19 (95%), of which 10 (53%) were hybridization positive. In comparison, 12 (60%) of the specimens were positive by direct microscopy, but only 7 (35%) of the specimens showed fungal growth. Sequencing of the nonhybridized amplification products identified an infecting agent in six specimens, and three specimens yielded only sequences of unknown fungal origin. The procedure provides a rapid (within 2 days) detection of common fungal pathogens in tissue specimens, and it is highly versatile for the identification of other fungal pathogens.
| S-EPMC87561 | biostudies-literature
Project description:DNA from 101 specimens containing herpes simplex virus (HSV) produced atypical intermediate melting curves compared with those expected for HSV type 1 or HSV type 2 subsequent to real-time PCR. Nucleic acid sequence analysis of amplified target DNA revealed 1- or 3-bp polymorphisms in the probe region which allowed designation of these viruses as HSV genotype 1 or HSV genotype 2. These two subpopulations of HSV were also identified as HSV genotype 1 or HSV genotype 2 using another commercially available PCR method. Amplified HSV target DNA producing intermediate melting curves could be designated as HSV genotype 1 or HSV genotype 2 without performing sequencing or another PCR method with 96/101 (95%) specimens by adding known intermediate HSV DNA characteristic for the two subpopulations as controls.
| S-EPMC1081363 | biostudies-literature