Dataset Information

An investigation of Li₂TiO₃-coke composite anode material for Li-ion batteries.

ABSTRACT: Anode material Li₂TiO₃-coke was prepared and tested for lithium-ion batteries. The as-prepared material exhibits excellent cycling stability and outstanding rate performance. Charge/discharge capacities of 266 mA h g^-1 at 0.100 A g^-1 and 200 mA h g^-1 at 1.000 A g^-1 are reached for Li₂TiO₃-coke. A cycling life-time test shows that Li₂TiO₃-coke gives a specific capacity of 264 mA h g^-1 at 0.300 A g^-1 and a capacity retention of 92% after 1000 cycles of charge/discharge.

SUBMITTER: Liu Y

PROVIDER: S-EPMC9064618 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

An investigation of Li2TiO3-coke composite anode material for Li-ion batteries.

Liu Youlin Y Li Wensheng W Zhou Xiaoping X

RSC advances 20190605 31

Anode material Li2TiO3-coke was prepared and tested for lithium-ion batteries. The as-prepared material exhibits excellent cycling stability and outstanding rate performance. Charge/discharge capacities of 266 mA h g-1 at 0.100 A g-1 and 200 mA h g-1 at 1.000 A g-1 are reached for Li2TiO3-coke. A cycling life-time test shows that Li2TiO3-coke gives a specific capacity of 264 mA h g- ...[more]

PMID: 35520566

Similar Datasets

Project description:Bagasse-derived carbon electrodes were developed by doping with nitrogen functional groups and compositing with high-capacity MnO2 nanoparticles (MnO2/NBGC). The bagasse-derived biochar was N-doped by refluxing in urea, followed by the deposition of MnO2 nanoparticles onto its porous surface via the hydrothermal reduction of KMnO4. Different initial KMnO4 loading concentrations (i.e. 5, 10, 40, and 100 mM) were applied to optimize the composite morphology and the corresponding electrochemical performance. Material characterization confirmed that the carbon composite has a mesoporous structure along with the dispersion of MnO2 nano-particles on the N-containing carbon surface. It was found that the 5-MnO2/NBGC sample exhibited the highest electrochemical performance with a reversible capacity of 760 mA h g-1 at a current density of 186 mA g-1. It delivered reversible capacities of 488 and 390 mA h g-1 in cycle tests at 372 and 744 mA g-1, respectively, for 150 cycles and presented good reversibility with nearly 100% coulombic efficiency. In addition, it could exert high capacities up to 388 and 301 mA h g-1 even under high current densities of 1860 and 3720 mA g-1, respectively. Moreover, most of the prepared composite products showed high rate capability with great reversibility up to more than 90% after testing at a high current density of 3720 mA g-1. The great electrochemical performance of the MnO2/NBGC nanocomposite electrode can be attributed to the synergistic impact of the hierarchical architecture of the MnO2 nanocrystals deposited on porous carbon and the capacitive effect of the N-containing defects within the carbon material. The nanostructure of the MnO2 particles deposited on porous carbon limits its large volume change during cycling and promotes good adhesion of MnO2 nanoparticles with the substrate. Meanwhile, the capacitive effect of the exposed N-functional groups enables fast ionic conduction and reduces interfacial resistance at the electrode interface.

Dataset Information

An investigation of Li₂TiO₃-coke composite anode material for Li-ion batteries.

Publications

An investigation of Li<sub>2</sub>TiO<sub>3</sub>-coke composite anode material for Li-ion batteries.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets