Dataset Information

Comparison of nano-structured transition metal modified tri-metal MgMAl-LDHs (M = Fe, Zn, Cu, Ni, Co) prepared using co-precipitation.

ABSTRACT: Comparison of layered double hydroxides (LDHs) synthesised using different methods, conditions and post-treatment is difficult to achieve because these greatly modify their material properties. This paper aims to provide a comparison of material properties for modified quintinite, where all LDHs were synthesised at the same conditions - thus allowing for direct comparison of the material properties obtained. Nano-structured materials were formed in all cases. The nano-structured transition metal (TM) MgMAl-LDHs were synthesised using constant pH co-precipitation. Five TMs (M = Fe, Co, Ni, Cu, Zn) were included in the LDH layers with molar substitutions of 0.5%, 1%, 5%, 10%, and 25% based on Mg-replacement for divalent TM cations and Al-replacement for trivalent TM cations. The materials were characterised using powder X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared analysis (ATR-FTIR), thermogravimetric analysis (TGA) and particle size analysis (PSA). The modified LDHs were synthesised free of major by-products and with similar morphologies. It could be shown that the crystallite dimensions varied between the different TM substitutions, that morphological changes were visible for some of the TMs used, that the processability depended on the TMs substituted, and that the substitution of TMs influenced the thermal stability of the LDHs.

SUBMITTER: Gevers BR

PROVIDER: S-EPMC9071004 | biostudies-literature | 2019 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Comparison of nano-structured transition metal modified tri-metal MgMAl-LDHs (M = Fe, Zn, Cu, Ni, Co) prepared using co-precipitation.

Gevers Bianca R BR Naseem Sajid S Leuteritz Andreas A Labuschagné Frederick J W J FJWJ

RSC advances 20190909 48

Comparison of layered double hydroxides (LDHs) synthesised using different methods, conditions and post-treatment is difficult to achieve because these greatly modify their material properties. This paper aims to provide a comparison of material properties for modified quintinite, where all LDHs were synthesised at the same conditions - thus allowing for direct comparison of the material properties obtained. Nano-structured materials were formed in all cases. The nano-structured transition metal ...[more]

PMID: 35530444

Similar Datasets

Project description:Background/Objectives: The co-formulation of active pharmaceutical ingredients (APIs) is a growing strategy in biopharmaceutical development, particularly when it comes to improving solubility and bioavailability. This study explores a co-precipitation method to prepare co-formulated crystals of griseofulvin (GF) and dexamethasone (DXM), utilizing nanostructured, functionalized polylactic glycolic acid (nfPLGA) as a solubility enhancer. Methods: An antisolvent precipitation technique was employed to incorporate nfPLGA at a 3% concentration into the co-formulated GF and DXM, referred to as DXM-GF-nfPLGA. The dissolution performance of this formulation was compared to that of the pure drugs and the co-precipitated DXM-GF without nfPLGA. Results: Several characterization techniques, including electron microscopy (SEM), RAMAN, FTIR, TGA, and XRD, were used to analyze the nfPLGA incorporation and the co-precipitated co-formulations. The inclusion of nfPLGA significantly enhanced the dissolution and initial dissolution rate of both GF and DXM in the DXM-GF-nfPLGA formulation, achieving a maximum dissolution of 100%, which was not attained by the pure drugs or the DXM-GF formulation. The incorporation of nfPLGA also reduced the amount of time taken to reach 50% (T50) and 80% (T80) dissolution. T50 values decreased from 52 and 82 min (for pure DXM and GF) to 23 min for DXM-GF-nfPLGA, and the T80 improved to 50 min for DXM-GF-nfPLGA, significantly outpacing the pure compounds. Furthermore, incorporating nfPLGA into the crystal structures greatly accelerated the dissolution rates, with initial rates reaching 650.92 µg/min for DXM-GF-nfPLGA compared to 540.60 µg/min for DXM-GF, while pure GF and DXM showed lower rates. Conclusions: This work demonstrates that nfPLGA incorporation enhances dissolution performance by forming water channels within the API crystal via hydrogen-bonding interactions. This innovative nfPLGA incorporation method holds promise for developing hydrophobic co-formulations with faster solubility and dissolution rates.

Dataset Information

Comparison of nano-structured transition metal modified tri-metal MgMAl-LDHs (M = Fe, Zn, Cu, Ni, Co) prepared using co-precipitation.

Publications

Comparison of nano-structured transition metal modified tri-metal MgMAl-LDHs (M = Fe, Zn, Cu, Ni, Co) prepared using co-precipitation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets