Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced lithium storage performance of porous exfoliated carbon fibers via anchored nickel nanoparticles.

ABSTRACT: Herein, flexible carbon fiber cloth (CFC) is modified by embedding Ni nanoparticles via a thermal reduction strategy, and it is used as a suitable anode material for lithium-ion batteries. Benefitting from the elemental interaction between Ni and carbon, the Ni-embedded CFC displayed higher lithium storage properties than pristine CFC and Ni-free porous CFC.

SUBMITTER: Huang X

PROVIDER: S-EPMC9080291 | biostudies-literature | 2018 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhanced lithium storage performance of porous exfoliated carbon fibers <i>via</i> anchored nickel nanoparticles.

Huang Xue X Diao Guiqiang G Li Siqi S Balogun Muhammad-Sadeeq MS Li Nan N Huang Yongchao Y Liu Zhao-Qing ZQ Tong Yexiang Y

RSC advances 20180509 31

Herein, flexible carbon fiber cloth (CFC) is modified by embedding Ni nanoparticles <i>via</i> a thermal reduction strategy, and it is used as a suitable anode material for lithium-ion batteries. Benefitting from the elemental interaction between Ni and carbon, the Ni-embedded CFC displayed higher lithium storage properties than pristine CFC and Ni-free porous CFC. ...[more]

PMID: 35539253

Similar Datasets

The Enhanced Lithium-Storage Performance for MnO Nanoparticles Anchored on Electrospun Nitrogen-Doped Carbon Fibers.

Project description:Manganese monoxide (MnO) is a promising anode material in the lithium-ion battery for its high capacity, low operation potential, and environmental benignity. However, its application is impeded by poor rate capability and rapid capacity fading. In this work, a MnO/carbon hybrid material, in which small-sized MnO nanoparticles are tightly anchored on carbon fibers (denoted as MnO@CFs), was prepared by annealing the electrospun precursor fibers at 650 °C. When applied as the anode material of the Li-ion battery, the small size of MnO shortens the Li-ion diffusion path, and the carbon fibers not only greatly improve the conductivity but also efficiently buffer the MnO structure strain during the charge⁻discharge process, endowing the MnO@CFs electrode with a good rate capability (185 mAh g-1 at 5 A g-1) and cyclic stability (406 mAh g-1 after 500 cycles at 1.0 A g-1).

| S-EPMC6163262 | biostudies-literature

Enhanced Lithium Storage in Hierarchically Porous Carbon Derived from Waste Tea Leaves.

Project description:In this study, highly nanoporous carbon (HCl-TW-Car) was successfully synthesized using a facile procedure combining acid treatment with a carbonization process that uses waste tea leaves from spent tea bags as raw materials. The acid treatment not only promotes the efficient removal of unnecessary inorganic impurities but also increases the product porosity to enable synthesis of hierarchically porous carbon materials with various micro-, meso-, and macropores. When used as an anode material for lithium-ion batteries, HCl-TW-Car demonstrated a much higher discharge capacity than is theoretically possible using graphite [479 mAh g-1 after the 200th cycle at a rate of 0.2C (1C = 372 mA g-1)] and exhibited greater rate capabilities compared with those of carbonated products from tea waste without acid treatment. It was shown that the good electrochemical properties of HCl-TW-Car can be ascribed to large Brunauer-Emmett-Teller (BET) surface area, well-formed hierarchical pores, and the prevention of unexpected electrochemical reactions from the reduction of metallic atoms.

| S-EPMC5155420 | biostudies-literature

Bi Nanoparticles Anchored in N-Doped Porous Carbon as Anode of High Energy Density Lithium Ion Battery.

Project description:A novel bismuth-carbon composite, in which bismuth nanoparticles were anchored in a nitrogen-doped carbon matrix (Bi@NC), is proposed as anode for high volumetric energy density lithium ion batteries (LIBs). Bi@NC composite was synthesized via carbonization of Zn-containing zeolitic imidazolate (ZIF-8) and replacement of Zn with Bi, resulting in the N-doped carbon that was hierarchically porous and anchored with Bi nanoparticles. The matrix provides a highly electronic conductive network that facilitates the lithiation/delithiation of Bi. Additionally, it restrains aggregation of Bi nanoparticles and serves as a buffer layer to alleviate the mechanical strain of Bi nanoparticles upon Li insertion/extraction. With these contributions, Bi@NC exhibits excellent cycling stability and rate capacity compared to bare Bi nanoparticles or their simple composites with carbon. This study provides a new approach for fabricating high volumetric energy density LIBs.

| S-EPMC6199101 | biostudies-literature

Chemical vapor deposition growth of carbon nanotube confined nickel sulfides from porous electrospun carbon nanofibers and their superior lithium storage properties.

Project description:Multidimensional architecture design is a promising strategy to explore unique physicochemical characteristics by synergistically integrating different structural and compositional materials. Herein, we report the facile synthesis of a novel dendritic hybrid architecture, where carbon nanotubes (CNTs) with nickel sulfide nanoparticles encapsulated inside are epitaxially grown out of the porous electrospun N-doped carbon nanofibers (CNFs) (denoted as CNT@NS@CNFs) through a combined strategy of electrospinning and chemical vapor deposition (CVD). The adopted thiophene (C4H4S) not only serves as a carbon source for the growth of CNTs but also as a sulfur source for the sulfurization of Ni particles and S-doping into carbon matrices. When examined as an anode material for lithium-ion batteries (LIBs), the dendritic CNT@NS@CNFs display superior lithium storage properties including good cycle stability and high rate capability, delivering a high reversible capacity of 630 mA h g-1 at 100 mA g-1 after 200 cycles and 277 mA h g-1 at a high rate of 1000 mA g-1. These outstanding electrochemical properties can be attributed to the novel hybrid architecture, in which the encapsulation of nickel sulfide nanoparticles within the CNT/CNFs not only efficiently buffers the volume changes upon lithiation/delithiation, but also facilitates charge transfer and electrolyte diffusion owing to the highly conductive networks with open frame structures.

| S-EPMC9473167 | biostudies-literature

Fe₂O₃ nanoparticles wrapped in multi-walled carbon nanotubes with enhanced lithium storage capability.

Project description:We have designed a novel hybrid nanostructure by coating Fe₂O₃ nanoparticles with multi-walled carbon nanotubes to enhance the lithium storage capability of Fe₂O₃. The strategy to prepare Fe₂O₃@MWCNTs involves the synthesis of Fe nanoparticles wrapped in MWCNTs, followed by the oxidation of Fe nanoparticles under carbon dioxide. When used as the anode in a Li-ion battery, this hybrid material (70.32 wt% carbon nanotubes, 29.68 wt% Fe₂O₃) showed a reversible discharge capacity of 515 mAhg⁻¹ after 50 cycles at a density of 100 mAg⁻¹ and the capacity based on Fe₂O₃ nanoparticles was calculated as 1147 mAhg⁻¹, Three factors are responsible for the superior performance: (1) The hollow interiors of MWCNTs provide enough spaces for the accommodation of large volume expansion of inner Fe₂O₃ nanoparticles, which can improving the stability of electrode; (2) The MWCNTs increase the overall conductivity of the anode; (3) A stable solid electrolyte interface film formed on the surface of MWCNTs may reduce capacity fading.

| S-EPMC3844968 | biostudies-literature

The Enhanced Hydrogen Storage Capacity of Carbon Fibers: The Effect of Hollow Porous Structure and Surface Modification.

Project description:In this study, highly porous carbon fiber was prepared for hydrogen storage. Porous carbon fiber (PCF) and activated porous carbon fiber (APCF) were derived by carbonization and chemical activation after selectively removing polyvinyl alcohol from a bi-component fiber composed of polyvinyl alcohol and polyacrylonitrile (PAN). The chemical activation created more pores on the surface of the PCF, and consequently, highly porous APCF was obtained with an improved BET surface area (3058 m2 g-1) and micropore volume (1.18 cm3 g-1) compare to those of the carbon fiber, which was prepared by calcination of monocomponent PAN. APCF was revealed to be very efficient for hydrogen storage, its hydrogen capacity of 5.14 wt% at 77 K and 10 MPa. Such hydrogen storage capacity is much higher than that of activated carbon fibers reported previously. To further enhance hydrogen storage capacity, catalytic Pd nanoparticles were deposited on the surface of the APCF. The Pd-deposited APCF exhibits a high hydrogen storage capacity of 5.45 wt% at 77 K and 10 MPa. The results demonstrate the potential of Pd-deposited APCF for efficient hydrogen storage.

| S-EPMC8308342 | biostudies-literature

BODIPY-Based Conjugated Porous Polymer and Its Derived Porous Carbon for Lithium-Ion Storage.

Project description:Conjugated porous polymers (CPPs) possess great potential in the energy storage aspect. In this work, a boron-dipyrromethene (BODIPY)-conjugated porous polymer (CPP-1) is achieved by a traditional organic synthesis route. Following this, a carbonization process is employed to obtain the carbonized porous material (CPP-1-C). The two as-prepared samples, which are characterized by doping with heteroatoms and their porous structure, are able to shorten the lithium-ion pathways and improve the lithium-ion storage property. Then, CPP-1 and CPP-1-C are applied as anode materials in lithium-ion batteries. As expected, long-term cyclic performances at 0.1 and 1 A g-1 are achieved with maintaining the specific capacity at 273.2 mA h g-1 after 100 cycles at 0.1 A g-1 and 250.8 mA h g-1 after 300 cycles at 1 A g-1. The carbonized sample exhibits a better electrochemical performance with a reversible specific capacity of 675 mA h g-1 at 0.2 A g-1. Moreover, the capacity is still stabilized at 437 mA h g-1 after 500 cycles at 0.5 A g-1. These results demonstrate that BODIPY-based CPPs are capable of being exploited as promising candidates for electrode materials in the fields of energy storage and conversion.

| S-EPMC6644894 | biostudies-literature

MOF-derived multifractal porous carbon with ultrahigh lithium-ion storage performance.

Project description:Porous carbon is one of the most promising alternatives to traditional graphite materials in lithium-ion batteries. This is not only attributed to its advantages of good safety, stability and electrical conductivity, which are held by all the carbon-based electrodes, but also especially ascribed to its relatively high capacity and excellent cycle stability. Here we report the design and synthesis of a highly porous pure carbon material with multifractal structures. This material is prepared by the vacuum carbonization of a zinc-based metal-organic framework, which demonstrates an ultrahigh lithium storage capacity of 2458 mAh g-1 and a favorable high-rate performance. The associations between the structural features and the lithium storage mechanism are also revealed by small-angle X-ray scattering (SAXS), especially the closed pore effects on lithium-ion storage.

| S-EPMC5225442 | biostudies-literature

Atomically dispersed nickel-nitrogen-sulfur species anchored on porous carbon nanosheets for efficient water oxidation.

Project description:Developing low-cost electrocatalysts to replace precious Ir-based materials is key for oxygen evolution reaction (OER). Here, we report atomically dispersed nickel coordinated with nitrogen and sulfur species in porous carbon nanosheets as an electrocatalyst exhibiting excellent activity and durability for OER with a low overpotential of 1.51 V at 10 mA cm-2 and a small Tafel slope of 45 mV dec-1 in alkaline media. Such electrocatalyst represents the best among all reported transition metal- and/or heteroatom-doped carbon electrocatalysts and is even superior to benchmark Ir/C. Theoretical and experimental results demonstrate that the well-dispersed molecular S|NiNx species act as active sites for catalyzing OER. The atomic structure of S|NiNx centers in the carbon matrix is clearly disclosed by aberration-corrected scanning transmission electron microscopy and synchrotron radiation X-ray absorption spectroscopy together with computational simulations. An integrated photoanode of nanocarbon on a Fe2O3 nanosheet array enables highly active solar-driven oxygen production.

| S-EPMC6437202 | biostudies-literature

Flexible MnO nanoparticle-anchored N-doped porous carbon nanofiber interlayers for superior performance lithium metal anodes.

Project description:The mounting requirements for electric apparatus and vehicles stimulate the rapid progress of energy storage systems. Lithium (Li) metal is regarded as one of the most prospective anodes for high-performance cells. However, the uneven dendrite growth is one of the primary conundrums that hampers the use of the Li metal anode in rechargeable Li batteries. Achieving even Li deposition is crucial to solve this concern. In this study, a stable interlayer based on electrospun flexible MnO nanoparticle/nitrogen (N)-doped (polyimide) PI-based porous carbon nanofiber (MnO-PCNF) films was effectively prepared via electrospinning and in situ growth of MnO to reduce the growth of Li dendrites. It is revealed that the attraction of implanted MnO towards Li, the lithiophilic nature of N dopants and the capillary force of porous architectures are beneficial to the preeminent Li wettability of the MnO-PCNF interlayer. Furthermore, the wettable, stable and conductive structure of the MnO-PCNF interlayer can be retained well, offering rapid charge transfer to Li redox reactions, reduced local current density during the cycling process and homogeneous distribution of deposited Li. Consequently, anodes with MnO-PCNF interlayers can relieve the volume change and inhibit the growth of Li dendrites, demonstrating a remarkable lifetime for lithium metal cells at high current.

| S-EPMC9419476 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data