Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Oxide removal and stabilization of bismuth thin films through chemically bound thiol layers.

ABSTRACT: Bismuth has been identified as a material of interest for electronic applications due to its extremely high electron mobility and quantum confinement effects observed at nanoscale dimensions. However, it is also the case that Bi nanostructures are readily oxidised in ambient air, necessitating additional capping steps to prevent surface re-oxidation, thus limiting the processing potential of this material. This article describes an oxide removal and surface stabilization method performed on molecular beam epitaxy (MBE) grown bismuth thin-films using ambient air wet-chemistry. Alkanethiol molecules were used to dissolve the readily formed bismuth oxides through a catalytic reaction; the bare surface was then reacted with the free thiols to form an organic layer which showed resistance to complete reoxidation for up to 10 days.

SUBMITTER: Alessio Verni G

PROVIDER: S-EPMC9086459 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Oxide removal and stabilization of bismuth thin films through chemically bound thiol layers.

Alessio Verni Giuseppe G Long Brenda B Gity Farzan F Lanius Martin M Schüffelgen Peter P Mussler Gregor G Grützmacher Detlev D Greer Jim J Holmes Justin D JD

RSC advances 20180927 58

Bismuth has been identified as a material of interest for electronic applications due to its extremely high electron mobility and quantum confinement effects observed at nanoscale dimensions. However, it is also the case that Bi nanostructures are readily oxidised in ambient air, necessitating additional capping steps to prevent surface re-oxidation, thus limiting the processing potential of this material. This article describes an oxide removal and surface stabilization method performed on mole ...[more]

PMID: 35548121

Similar Datasets

Gas Sensors Based on Chemically Reduced Holey Graphene Oxide Thin Films.

Project description:The nanosheet stacking phenomenon in graphene thin films significantly deteriorates their gas-sensing performance. This nanosheet stacking issue should be solved and reduced to enhance the gas detection sensitivity. In this study, we report a novel ammonia (NH3) gas sensor based on holey graphene thin films. The precursors, holey graphene oxide (HGO) nanosheets, were prepared by etching graphene under UV irradiation with Fenton reagent (Fe2+/Fe3+/H2O2). Holey graphene was prepared by the reduction of HGO (rHGO) with pyrrole. Holey graphene thin-film gas sensors were prepared by depositing rHGO suspensions onto the electrodes. The resulting sensing devices show excellent response, sensitivity, and selectivity to NH3. The resistance change is 2.81% when the NH3 level is as low as 1 ppm, whereas the resistance change is 11.32% when the NH3 level is increased to 50 ppm. Furthermore, the rHGO thin-film gas sensor could be quickly restored to their initial states without the stimulation with an IR lamp. In addition, the devices showed excellent repeatability. The resulting rHGO thin-film gas sensor has a great potential for applications in numerous sensing fields because of its low cost, low energy consumption, and outstanding sensing performance.

| S-EPMC6603111 | biostudies-literature

Topologically nontrivial bismuth(111) thin films.

Project description:Using high-resolution angle-resolved photoemission spectroscopy (ARPES), the topological property of the three-dimensional Bi(111) films grown on the Bi2Te3(111) substrate were studied. Very different from the bulk Bi, we found another surface band near the point besides the two well-known surface bands on the 30 nm films. With this new surface band, the bulk valence band and the bulk conduction band can be connected by the surface states in the Bi(111)/Bi2Te3 films. Our band mapping revealed odd number of Fermi crossings of the surface bands, which provided new experimental evidences that Bi(111)/Bi2Te3 films of a certain thickness can be topologically nontrivial in three dimension.

| S-EPMC4758034 | biostudies-other

Annealing Effect on the Structural and Optical Properties of Sputter-Grown Bismuth Titanium Oxide Thin Films.

Project description:The aim of this work is to assess the evolution of the structural and optical properties of BixTiyOz films grown by rf magnetron sputtering upon post-deposition annealing treatments in order to obtain good quality films with large grain size, low defect density and high refractive index similar to that of single crystals. Films with thickness in the range of 220-250 nm have been successfully grown. After annealing treatment at 600 °C the films show excellent transparency and full crystallization. It is shown that to achieve larger crystallite sizes, up to 17 nm, it is better to carry the annealing under dry air than under oxygen atmosphere, probably because the nucleation rate is reduced. The refractive index of the films is similar under both atmospheres and it is very high (n =2.5 at 589 nm). However it is still slightly lower than that of the single crystal value due to the polycrystalline morphology of the thin films.

| S-EPMC5453219 | biostudies-other

Regulating strain in perovskite thin films through charge-transport layers.

Project description:Thermally-induced tensile strain that remains in perovskite films following annealing results in increased ion migration and is a known factor in the instability of these materials. Previously-reported strain regulation methods for perovskite solar cells (PSCs) have utilized substrates with high thermal expansion coefficients that limits the processing temperature of perovskites and compromises power conversion efficiency. Here we compensate residual tensile strain by introducing an external compressive strain from the hole-transport layer. By using a hole-transport layer with high thermal expansion coefficient, we compensate the tensile strain in PSCs by elevating the processing temperature of hole-transport layer. We find that compressive strain increases the activation energy for ion migration, improving the stability of perovskite films. We achieve an efficiency of 16.4% for compressively-strained PSCs; and these retain 96% of their initial efficiencies after heating at 85 °C for 1000 hours-the most stable wide-bandgap perovskites (above 1.75 eV) reported so far.

| S-EPMC7090003 | biostudies-literature

Stabilization of magnetic helix in exchange-coupled thin films.

Project description:Based on micromagnetic simulations, we report on a novel magnetic helix in a soft magnetic film that is sandwiched between and exchange-coupled to two hard magnetic layers with different anisotropies. We show that such a confined helix stays stable without the presence of an external magnetic field. The magnetic stability is determined by the energy minimization and is a result of an internal magnetic field created by the exchange interaction. We show that this internal field stores a magnetic energy density of a few kJ/m(3). We also find that it dramatically modifies ferromagnetic resonances, such that the helix can be used as a ferromagnetic resonance filter and a fast acting attenuator.

| S-EPMC4633621 | biostudies-literature

Dynamics and manipulation of ferroelectric domain walls in bismuth ferrite thin films.

Project description:Ferroelectric domain walls differ from domains not only in their crystalline and discrete symmetry, but also in their electronic, magnetic, and mechanical properties. Although domain walls provide a degree of freedom to regulate the physical properties at the nanoscale, the relatively lower controllability prevents their practical applications in nano-devices. In this work, with the advantages of 3D domain configuration detection based on piezoresponse force microscopy, we find that the mobility of three types of domain walls (tail-to-tail, head-to-tail, head-to-head) in (001) BiFeO3 films varies with the applied electrical field. Under low voltages, head-to-tail domain walls are more mobile than other domain walls, while, under high voltages, tail-to-tail domain walls become rather active and possess relatively long average lengths. This is due to the high nucleation energy and relatively low growth energy for charged domain walls. Finally, we demonstrate the manipulation of domain walls through successive electric writings, resulting in well-aligned conduction paths as designed, paving the way for their application in advanced spintronic, memory and communication nano-devices.

| S-EPMC8288939 | biostudies-literature

Thermoelectric Properties of Bismuth Telluride Thin Films Electrodeposited from a Nonaqueous Solution.

Project description:We report the thermoelectric properties of Bi2Te3 thin films electrodeposited from the weakly coordinating solvent dichloromethane (CH2Cl2). It was found that the oxidation of porous films is significant, causing the degradation of its thermoelectric properties. We show that the morphology of the film can be improved drastically by applying a short initial nucleation pulse, which generates a large number of nuclei, and then growing the nuclei by pulsed electrodeposition at a much lower overpotential. This significantly reduces the oxidation of the films as smooth films have a smaller surface-to-volume ratio and are less prone to oxidation. X-ray photoelectron spectroscopy (XPS) shows that those films with Te(O) termination show a complete absence of oxygen below the surface layer. A thin film transfer process was developed using polystyrene as a carrier polymer to transfer the films from the conductive TiN to an insulating layer for thermoelectrical characterization. Temperature-dependent Seebeck measurements revealed a room-temperature coefficient of -51.7 μV/K growing to nearly -100 μV/K at 520 °C. The corresponding power factor reaches a value of 88.2 μW/mK2 at that temperature.

| S-EPMC7315573 | biostudies-literature

Ionization Radiation Shielding Effectiveness of Lead Acetate, Lead Nitrate, and Bismuth Nitrate-Doped Zinc Oxide Nanorods Thin Films: A Comparative Evaluation.

Project description:The fabrication of Nano-based shielding materials is an advancing research area in material sciences and nanotechnology. Although bulky lead-based products remain the primary choice for radiation protection, environmental disadvantages and high toxicity limit their potentials, necessitating less costly, compatible, eco-friendly, and light-weight alternatives. The theme of the presented investigation is to compare the ionization radiation shielding potentialities of the lead acetate (LA), lead nitrate (LN), and bismuth nitrate (BN)-doped zinc oxide nanorods-based thin films (ZONRs-TFs) produced via the chemical bath deposition (CBD) technique. The impact of the selected materials' doping content on morphological and structural properties of ZONRs-TF was investigated. The X-ray diffractometer (XRD) analyses of both undoped and doped TFs revealed the existence of hexagonal quartzite crystal structures. The composition analysis by energy dispersive (EDX) detected the corrected elemental compositions of the deposited films. Field emission scanning electronic microscope (FESEM) images of the TFs showed highly porous and irregular surface morphologies of the randomly aligned NRs with cracks and voids. The undoped and 2 wt.% BN-doped TFs showed the smallest and largest grain size of 10.44 nm and 38.98 nm, respectively. The linear attenuation coefficient (µ) values of all the optimally doped ZONRs-TFs measured against the X-ray photon irradiation disclosed their excrement shielding potency. The measured µ values of the ZONRs-TFs displayed the trend of 1 wt.% LA-doped TF > 1 wt.% LN-doped TF > 3 wt.% BN-doped TF > undoped TFs). The values of μ of the ZONRs-TFs can be customized by adjusting the doping contents, which in turn controls the thickness and morphology of the TFs. In short, the proposed new types of the LA-, LN- and BN-doped ZONRs-TFs may contribute towards the development of the prospective ionization radiation shielding materials.

| S-EPMC8746144 | biostudies-literature

Chemically routed interpore molecular diffusion in metal-organic framework thin films.

Project description:Transport diffusivity of molecules in a porous solid is constricted by the rate at which molecules move from one pore to the other, along the concentration gradient, i.e. by following Fickian diffusion. In heterogeneous porous materials, i.e. in the presence of pores of different sizes and chemical environments, diffusion rate and directionality remain tricky to estimate and adjust. In such a porous system, we have realized that molecular diffusion direction can be orthogonal to the concentration gradient. To experimentally determine this complex diffusion rate dependency and get insight of the microscopic diffusion pathway, we have designed a model nanoporous structure, metal-organic framework (MOF). In this model two chemically and geometrically distinct pore windows are spatially oriented by an epitaxial, layer-by-layer growth method. The specific design of the nanoporous channels and quantitative mass uptake rate measurements have indicated that the mass uptake is governed by the interpore diffusion along the direction orthogonal to the concentration gradient. This revelation allows chemically carving the nanopores, and accelerating the interpore diffusion and kinetic diffusion selectivity.

| S-EPMC10113335 | biostudies-literature

Identifying magnetic phases in chemically ordered and disordered FeAl thin films.

Project description:Direct magnetic writing of ferromagnetic nanoscale elements provides an alternative pathway for potential application in data storage or spintronic devices. Magnetic patterning due to local chemical disordering of Fe60Al40 thin films results in adjacent nanoscale regions that possess two different phases, viz. a low-magnetization and high-coercive chemically ordered phase (non-irradiated ferromagnetic area, NIFM) and a high-magnetization and low-coercive chemically disordered phase (irradiated ferromagnetic area, IMF). Depending on the volume of NIFM and IFM phases, different interaction mechanisms were revealed. It was shown that the modulated films of the coexisting magnetic phases do not lead to exchange coupling in most cases. Evidence for exchange-spring behaviour, however, was found. Moreover, both magneto-structural phases at low temperatures show spin-glass-like properties. Understanding the influence of chemical ordering on magnetic properties is crucial for the advancement of the functionalities of spintronic devices and for the development of alloys with controllable magnetic properties.

| S-EPMC11571056 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data