Survival of SARS-CoV-2 in artificial seawater and on the surface of inanimate materials.
Ontology highlight
ABSTRACT:
SUBMITTER: Sun ZP
PROVIDER: S-EPMC9088490 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In order to plan and execute proper preventative measures against COVID-19, we need to understand how SARS-CoV-2 is transmitted. It has been shown to remain infectious on surfaces from hours to days depending on surface type and environmental factors. The possibility of transmission through fur animals and contaminated pelts, along with the safety of those working with them, is a major concern. SARS-CoV-2 can infect minks and raccoon dogs and has spread to mink farms in numerous countries. Here, we studied the stability of SARS-CoV-2 on blue fox, Finn raccoon, and American mink pelt, fake fur, cotton, plastic, faux leather, and polyester and tested its inactivation by UV light and heat treatment. We detected infectious virus up to 5 days on plastic, up to 1 day on fake fur, less than a day on cotton, polyester, and faux leather, and even 10 days on mink fur. UV light failed to inactivate SARS-CoV-2 on pelts, most likely due to the mechanical protection by the fur. Hence, it should not be used to inactivate the virus on fur products, and its use for other surfaces should also be considered carefully. Heat treatment at 60°C for 1 h inactivated the virus on all surfaces and is a promising method to be applied in practice. This study helps prevent further spread of COVID-19 by increasing our understanding about risks of SARS-CoV-2 spread through contaminated clothing materials and giving important information needed to improve safety of those working in the production line as well as people using the products.
| S-EPMC8049815 | biostudies-literature
Project description:Currently, the emergence of a novel coronavirus, referred to as SARS-CoV-2, has become a global health concern which cause severe respiratory tract infections in humans. Person-to-person transmission of SARS-CoV-2 has occurred across the globe, within a short period of SARS-CoV-2 emergence. The goal of this analysis is to summarize in various inanimate surfaces and environments information about the frequency, persistence, potential dissemination, and infectivity of SARS-CoV-2. Most respiratory viruses, including coronaviruses, SARS-CoVs, or influenza may persist for a few days on the surfaces or objects. The length of tenacity on various inanimate surfaces depends on the environmental and growth conditions and overall survival rate could range from minutes to month time. The SARS-CoV-2 may survive and maintain infectivity in the air in unventilated buses for 30 ?min. As no specific vaccines or therapeutic drugs are available for this contagious virus, timely prevention measures would be crucial to control the future outbreak of this infectious disease. Precautionary strategies such as wearing masks and frequent washing hands are effective to mitigate COVID-19. Following careful consideration of the above-mentioned scenarios, the short review spotlights the pressing environmental issues regarding the persistence, transmission, and infectivity of SARS-CoV-2 in different environmental matrices. Aiming to address this issue with further and deeper insight into the SARS-CoV-2 emergence, a list of most concerned questions is given that should be carefully considered and answered in future studies.
| S-EPMC7546641 | biostudies-literature
Project description: Not available
| S-EPMC7480442 | biostudies-literature
Project description:SARS-CoV-2 RNA is frequently identified in patient rooms and it was speculated that the viral load quantified by PCR might correlate with infectivity of surfaces. To evaluate Ct values for the prediction of infectivity, we investigated contaminated surfaces and Ct-value changes after disinfection. Viral RNA was detected on 37 of 143 investigated surfaces of an ICU. However, virus isolation failed for surfaces with a high viral RNA load. Also, SARS-CoV-2 could not be cultivated from surfaces artificially contaminated with patient specimens. In order to evaluate the significance of Ct values more precisely, we used surrogate enveloped bacteriophage Φ6. A strong reduction in Φ6 was achieved by three different disinfection methods. Despite a strong reduction in viability almost no change in the Ct values was observed for UV-C and alcoholic surface disinfectant. Disinfection using ozone resulted in a lack of Φ6 recovery as well as a detectable shift in Ct values indicating strong degradation of the viral RNA. The observed lack of significant effects on the detectable viral RNA after effective disinfection suggest that quantitative PCR is not suitable for predicting the infectivity of SARS-CoV-2 on inanimate surfaces. Ct values should therefore not be considered as markers for infectivity in this context.
| S-EPMC9779331 | biostudies-literature
Project description:Understanding the interactions and transmission of pathogens with/via inanimate surfaces common in the built environment and public transport vehicles is critical to promoting sustainable and resilient urban development. Here, molecular dynamics (MD) simulations are used to study the adhesion of SARS-CoV-2 (the causative agent of COVID-19) to some of these surfaces at different temperatures (same for surfaces and ambiance) ranging from -23 to 60 °C. Surfaces simulated are aluminum, copper, copper oxide, polyethylene (PE), and silicon dioxide (SiO2). Steered MD (SMD) simulations are also used to investigate the transfer of the virus from PE and SiO2 when a contaminated surface is touched. The virus shows the lowest and highest adhesions to PE and SiO2, respectively (20 vs 534 eV). Influence of temperature is not found to be noticeable. Using simulated water molecules to represent moisture on the skin, SMD simulations show that water molecules can lift the virus from the PE surface but damage the virus when lifting it from the the SiO2 surface. The results suggest that the PE surface is a more favorable surface to transmit the virus than the other surfaces simulated in this study. The results are compared with those reported in a few experimental studies.
| S-EPMC9761300 | biostudies-literature
Project description:Coronavirus disease (COVID-19) is a respiratory disease affecting many people and able to be transmitted through direct and perhaps indirect contact. Direct contact transmission, mediated by aerosols or droplets, is widely demonstrated, whereas indirect transmission is only supported by collateral evidence such as virus persistence on inanimate surfaces and data from other similar viruses. The present systematic review aims to estimate SARS-CoV-2 prevalence on inanimate surfaces, identifying risk levels according to surface characteristics. Data were obtained from studies in published papers collected from two databases (PubMed and Embase) with the last search on 1 September 2020. Included studies had to be papers in English, had to deal with coronavirus and had to consider inanimate surfaces in real settings. Studies were coded according to our assessment of the risk that the investigated surfaces could be contaminated by SARS-CoV-2. A meta-analysis and a metaregression were carried out to quantify virus RNA prevalence and to identify important factors driving differences among studies. Thirty-nine out of forty retrieved paper reported studies carried out in healthcare settings on the prevalence of virus RNA, five studies carry out also analyses through cell culture and six tested the viability of isolated viruses. Overall prevalences of SARS-CoV-2 RNA on high-, medium- and low-risk surfaces were 0.22 (CI95 [0.152-0.296]), 0.04 (CI95 [0.007-0.090]), and 0.00 (CI95 [0.00-0.019]), respectively. The duration surfaces were exposed to virus sources (patients) was the main factor explaining differences in prevalence.
| S-EPMC8313411 | biostudies-literature
Project description: Not available
| S-BSST379 | biostudies-other
Project description:High resolution imaging spectroscopy data have been recognised as a valuable data resource for augmenting detailed material inventories that serve as input for various urban applications. Image-specific urban spectral libraries are successfully used in urban imaging spectroscopy studies. However, the regional- and sensor-specific transferability of such libraries is limited due to the wide range of different surface materials. With the developed methodology, incomplete urban spectral libraries can be utilised by assuming that unknown surface material spectra are dissimilar to the known spectra in a basic spectral library (BSL). The similarity measure SID-SCA (Spectral Information Divergence-Spectral Correlation Angle) is applied to detect image-specific unknown urban surfaces while avoiding spectral mixtures. These detected unknown materials are categorised into distinct and identifiable material classes based on their spectral and spatial metrics. Experimental results demonstrate a successful redetection of material classes that had been previously erased in order to simulate an incomplete BSL. Additionally, completely new materials e.g., solar panels were identified in the data. It is further shown that the level of incompleteness of the BSL and the defined dissimilarity threshold are decisive for the detection of unknown material classes and the degree of spectral intra-class variability. A detailed accuracy assessment of the pre-classification results, aiming to separate natural and artificial materials, demonstrates spectral confusions between spectrally similar materials utilizing SID-SCA. However, most spectral confusions occur between natural or artificial materials which are not affecting the overall aim. The dissimilarity analysis overcomes the limitations of working with incomplete urban spectral libraries and enables the generation of image-specific training databases.
| S-EPMC5579714 | biostudies-literature
Project description:Environmental monitoring in public spaces can be used to identify surfaces contaminated by persons with coronavirus disease 2019 (COVID-19) and inform appropriate infection mitigation responses. Research groups have reported detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on surfaces days or weeks after the virus has been deposited, making it difficult to estimate when an infected individual may have shed virus onto a SARS-CoV-2-positive surface, which in turn complicates the process of establishing effective quarantine measures. In this study, we determined that reverse transcription-quantitative PCR (RT-qPCR) detection of viral RNA from heat-inactivated particles experiences minimal decay over 7 days of monitoring on eight out of nine surfaces tested. The properties of the studied surfaces result in RT-qPCR signatures that can be segregated into two material categories, rough and smooth, where smooth surfaces have a lower limit of detection. RT-qPCR signal intensity (average quantification cycle [Cq]) can be correlated with surface viral load using only one linear regression model per material category. The same experiment was performed with untreated viral particles on one surface from each category, with essentially identical results. The stability of RT-qPCR viral signal demonstrates the need to clean monitored surfaces after sampling to establish temporal resolution. Additionally, these findings can be used to minimize the number of materials and time points tested and allow for the use of heat-inactivated viral particles when optimizing environmental monitoring methods. IMPORTANCE Environmental monitoring is an important tool for public health surveillance, particularly in settings with low rates of diagnostic testing. Time between sampling public environments, such as hospitals or schools, and notifying stakeholders of the results should be minimal, allowing decisions to be made toward containing outbreaks of coronavirus disease 2019 (COVID-19). The Safer At School Early Alert program (SASEA) (https://saseasystem.org/), a large-scale environmental monitoring effort in elementary school and child care settings, has processed >13,000 surface samples for SARS-CoV-2, detecting viral signals from 574 samples. However, consecutive detection events necessitated the present study to establish appropriate response practices around persistent viral signals on classroom surfaces. Other research groups and clinical labs developing environmental monitoring methods may need to establish their own correlation between RT-qPCR results and viral load, but this work provides evidence justifying simplified experimental designs, like reduced testing materials and the use of heat-inactivated viral particles.
| S-EPMC8562474 | biostudies-literature
Project description:Dysregulated immune responses contribute to the excessive and uncontrolled inflammation observed in severe COVID-19. However, how immunity to SARS-CoV-2 is induced and regulated remains unclear. Here we uncover a role of the complement system in the induction of innate and adaptive immunity to SARS-CoV-2. Complement rapidly opsonizes SARS-CoV-2 particles via the lectin pathway. Complement-opsonized SARS-CoV-2 efficiently induces type-I interferon and pro-inflammatory cytokine responses via activation of dendritic cells, which are inhibited by antibodies against the complement receptors (CR) 3 and 4. Serum from COVID-19 patients, or monoclonal antibodies against SARS-CoV-2, attenuate innate and adaptive immunity induced by complement-opsonized SARS-CoV-2. Blocking of CD32, the FcγRII antibody receptor of dendritic cells, restores complement-induced immunity. These results suggest that opsonization of SARS-CoV-2 by complement is involved in the induction of innate and adaptive immunity to SARS-CoV-2 in the acute phase of infection. Subsequent antibody responses limit inflammation and restore immune homeostasis. These findings suggest that dysregulation of the complement system and FcγRII signaling may contribute to severe COVID-19.
| S-SCDT-10_1038-S44318-024-00061-0 | biostudies-other