Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facile Synthesis of Microporous Ferrocenyl Polymers Photocatalyst for Degradation of Cationic Dye.

ABSTRACT: Microporous organic polymers (MOPs) were prepared by condensation reactions from substituent-group-free carbazole and pyrrole with 1,1'-ferrocenedicarboxaldehyde without adding any catalysts. The resultant MOPs were insoluble in common solvent and characterized by FTIR, XPS, TGA and SEM. An N₂ adsorption test showed that the obtained polymers PFcMOP and CFcMOP exhibited Brunauer-Emmett-Teller (BET) surface areas of 48 and 105 m² g^-1, respectively, and both polymers possessed abundant micropores. The MOPs with a nitrogen and ferrocene unit could be potentially applied in degrading dye with high efficiency.

SUBMITTER: Zhang B

PROVIDER: S-EPMC9100194 | biostudies-literature | 2022 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Facile Synthesis of Microporous Ferrocenyl Polymers Photocatalyst for Degradation of Cationic Dye.

Zhang Bing B Tan Zhiqiang Z Zhang Yinhu Y Liu Qingquan Q Li Qianxia Q Li Gen G

Polymers 20220506 9

Microporous organic polymers (MOPs) were prepared by condensation reactions from substituent-group-free carbazole and pyrrole with 1,1'-ferrocenedicarboxaldehyde without adding any catalysts. The resultant MOPs were insoluble in common solvent and characterized by FTIR, XPS, TGA and SEM. An N2 adsorption test showed that the obtained polymers PFcMOP and CFcMOP exhibited Brunauer-Emmett-Teller (BET) surface areas of 48 and 105 m2 g-1, respectively, and both polyme ...[more]

PMID: 35567069

Similar Datasets

Facile one-pot synthesis of heterostructure SnO2/ZnO photocatalyst for enhanced photocatalytic degradation of organic dye.

Project description:In this work, heterostructure SnO2/ZnO nanocomposite photocatalyst was prepared by a straightforward one step polyol method. The resulting photocatalysts were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption analyses, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The results showed that the synthesized SnO2/ZnO nanocomposites possessed mesoporous wurtzite ZnO and cassiterite SnO2 nanocrystallites. The photocatalytic activity of the prepared SnO2/ZnO photocatalyst was investigated by the degradation of methylene blue dye under UV light irradiation. The heterostructure SnO2/ZnO photocatalyst showed much higher photocatalytic activities for the degradation of methylene blue dye than individual SnO2, ZnO nanomaterials and reference commercial TiO2 P25. This higher photocatalytic degradation activity was due to enhanced charge separation and subsequently the suppression of charge recombination in the SnO2/ZnO photocatalyst resulting from band offsets between SnO2 and ZnO. Finally, these heterostructure SnO2/ZnO nanocatalysts were stable and could be recycled several times without any appreciable change in degradation rate constant which opens new avenues toward potential industrial applications.

| S-EPMC9054812 | biostudies-literature

Facile Solution-Refluxing Synthesis and Photocatalytic Dye Degradation of a Dynamic Covalent Organic Framework.

Project description:Covalent organic frameworks (COFs), as a novel crystalline porous adsorbent, have been attracting significant attention for their synthesis and application exploration due to the advantages of designability, stability, and functionalization. Herein, through increasing the concentration of the acid catalyst, a facile solution-refluxing synthesis method was developed for the preparation of a three-dimensional dynamic COF material, COF-300, with high yields (>90%) and high space-time yields (>28 kg m-3 day-1). This synthesis method not only permits gram-scale synthesis, but also yields products that well maintain porosity and unique guest-dependent dynamic behavior. Moreover, the catalytic activity of COF-300 as a metal-free photocatalyst was explored for the first time. Under 365 nm ultra-violet light irradiation, COF-300 can effectively catalyze the dye degradation (>99%) in wastewater with good recyclability. By adding magnetic Fe3O4 nanoparticles into the solution-refluxing synthesis of COF-300, Fe3O4/COF-300 nanocomposites can be obtained and used as magnetically recyclable photocatalysts, demonstrating the superiority of this facile synthesis procedure. Our study provides new insights for the preparation of COF materials and a constructive exploration for their water treatment application.

| S-EPMC9697432 | biostudies-literature

Surface Modification of Attapulgite by Grafting Cationic Polymers for Treating Dye Wastewaters.

Project description:In this study, the cationic polymer poly-epichlorohydrin-dimethylamine was immobilized on natural attapulgite to improve the dye adsorption capacities. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, nitrogen adsorption-desorption isotherms, scanning electron microscope (SEM) analysis, zeta potential analysis, and particle size analysis were used to determine the characteristics of modified attapulgite. Results showed that the poly-epichlorohydrin-dimethylamine had been successfully grafted onto the surface of attapulgite without altering its crystal structure. After cationic modification, the specific surface area of attapulgite obviously decreased, and its surface zeta potentials possessed positive values in the pH range from 3 to 11. The cation-modified attapulgite displayed high adsorption capacities for anionic dyes, and its maximum adsorption capacities were 237.4 mg/g for Reactive Black 5 and 228.3 mg/g for Reactive Red 239; this is corroborated by Langmuir's isotherm studies. It was demonstrated that the two reactive dyes could be 100% removed from effluents when cation-modified attapulgite was used in column operation modes. Its treatment capacities were more than three times larger than that of activated carbon. The regeneration study verified better utilization and stability of the fabricated adsorbent in column operation. This work has conclusively confirmed the potential of the new modified attapulgite for effectively treating dye wastewaters.

| S-EPMC7915886 | biostudies-literature

Ferrocene-Based Conjugated Microporous Polymers Derived from Yamamoto Coupling for Gas Storage and Dye Removal.

Project description:Conjugated microporous polymers (CMPs) have conjugated skeleton and permanent porosity, and exhibit huge potential in developing novel functional materials for resolving the challenging energy and environment issues. Metal-containing CMPs often exhibited unique properties. In the present manuscript, ferrocene-based conjugated microporous polymers (FcCMPs) were designed and synthesized with 1,1'-dibromoferrocene and 5,10,15,20-Tetrakis(4- bromophenyl) porphyrin (FcCMP-1) or Tetra (p-bromophenyl) methane (FcCMP-2) as building units via Yamamoto coupling. FcCMPs were amorphous, and exhibited excellent thermal and physicochemical stability. The BET surface area of FcCMP-1 and FcCMP-2 was 638 m2/g and 422 m2/g, respectively. In comparison with FcCMP-2, FcCMP-1 displayed better gas storage capacity due to higher porosity. FcCMPs were also used as an adsorbent for removal of methyl violet from aqueous solution, and exhibited excellent adsorption properties due to the interaction between electron-rich conjugated structure of the polymers and methyl violet with cationic groups. Moreover, FcCMPs could be extracted and regenerated by an eluent and then re-used for high efficient removal of methyl violet.

| S-EPMC7183264 | biostudies-literature

A magnetically recyclable photocatalyst with commendable dye degradation activity at ambient conditions.

Project description:An efficient, economical, environment-friendly and easy separable catalyst to treat environmental contaminants is an enduring attention in recent years due to their great potential for environmental protection and remediation. Here we have reported the excellent performance of polyaniline activated heterojunctured Ni0.5Zn0.5Fe2O4 catalyst to degrade azo dye in an aqueous solution at ambient condition. The catalyst was prepared via a simple facile polymerization procedure. The physicochemical properties and structure of the synthesized catalyst was confirmed by TGA, PXRD, FTIR, SEM, HRTEM, XPS, EDX, and DRS techniques. The developed catalyst has shown an accelerated degradation ability of an organic pollutant Orange ll Sodium salt azo dye about 100% for the dye concentration of 50 ppm within five minutes at ambient conditions with 1 g/l loading of catalyst. Simple facile synthesis, easy separation by an external magnet, good reusability and high degradation capability of the catalyst may promote the practical applications of the heterostructured catalyst at ambient condition for water remediation. The present study also explored possible credible charge transfer directions and mechanism of photocatalysis supported by trapping experiments and electrochemical impedance spectroscopy (EIS) measurement for the effective improvement of photocatalytic activity and enhancement of the visible light adsorption.

| S-EPMC6168602 | biostudies-literature

Copper-Free Synthesis of Cationic Glycidyl Triazolyl Polymers.

Project description:Copper-free synthesis of cationic glycidyl triazolyl polymers (GTPs) is achieved through a thermal azide-alkyne cycloaddition reaction between glycidyl azide polymer and propiolic acid, followed by decarboxylation and quaternization of the triazole unit. For synthesizing nonfunctionalized GTP (GTP-H), a microwave-assisted method enhances the decarboxylation reaction of carboxy-functionalized GTP (GTP-COOH). Three variants of cationic GTPs with different N-substituents [N-ethyl, N-butyl, and N-tri(ethylene glycol) monomethyl ether (EG3)] are synthesized. The molecular weight of GTP-H is determined via size exclusion chromatography. Thermal properties of all GTPs are characterized using differential scanning calorimetry and thermogravimetric analysis. The ionic conductivities of these cationic GTPs are assessed by impedance measurements. The conducting ion concentration and mobility are calculated based on the electrode polarization model. Among three cationic GTPs, the GTP with the N-EG3 substituent exhibits the highest ionic conductivity, reaching 6.8 × 10-6 S cm-1 at 25 °C under dry conditions. When compared to previously reported reference polymers, the reduction of steric crowding around the triazolium unit is considered to be a key factor in enhancing ionic conductivity.

| S-EPMC11661660 | biostudies-literature

Facile Fabrication of a Novel Copper Nanozyme for Efficient Dye Degradation.

Project description:In this study, a novel copper nanozyme (CNZ) was synthesized by a mild way and characterized by scanning electron microscopy and Fourier transform infrared spectroscopy (FTIR). The as-fabricated CNZ exhibited typical peroxidase activity toward 2, 2'-azinodi-(3-ethylbenzthiazoline)-6-sulfonate. We successfully applied CNZ for the degradation of methyl orange pollutants. Under the optimum conditions (pH, 3.0; T, 60 °C; H2O2 concentration, 200 mM; dosage of CNZ, 8 mg), 93% of the degradation rate could be obtained in less than 10 min. Furthermore, the nanozyme exhibited excellent reusability and storage stability. All these experimental results suggested that CNZ is a powerful catalyst for industrial wastewater treatment.

| S-EPMC7948215 | biostudies-literature

PES-Ag3PO4/g-C3N4 Mixed Matrix Film Photocatalyst for Degradation of Methyl Orange Dye.

Project description:In the present study, we explored the effectiveness of PES-Ag3PO4/g-C3N4 film photocatalyst in degrading methyl orange dye under visible light irradiation. The PES-Ag3PO4/g-C3N4 film photocatalyst was prepared via a non-solvent-induced phase inversion process and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), laser scanning microscopy (LSM), X-ray photoelectron spectra (XPS), UV-diffuse reflectance (DRS), and water contact angle. The incorporation of the Ag3PO4/g-C3N4 composite into the PES matrix improved the pristine PES film's hydrophilicity, as evidenced by the reduction of water contact angle from 79.03° to 54.33° for a film containing 15 wt % of Ag3PO4/g-C3N4 composite. The film's photoactivity showed that 13 wt % was the best loading of Ag3PO4/g-C3N4 composite, and the degradation performance was maintained up to three cycles. The •O2- and h+ were the predominant species responsible for the methyl orange degradation.

| S-EPMC8198369 | biostudies-literature

Ferrocenyl Lawesson's reagent-based porous organic polymers for efficient adsorption-assisted photocatalysis degradation of organic dyes.

Project description:The adsorption process followed by photodegradation, adsorption-assisted photocatalysis, is an efficient way to achieve an enhanced overall removal of pollutants from wastewater. This aim can be achieved by a new type of metallocene-based porous organic polymers, denoted as Ferrocenyl Lawesson's reagent-metal-organic porous polymers (FcLR-MOPPs), including FcLR-P1 and FcLR-P2, synthesized through 1) synthesis of ferrocene-MOPPs (ferrocene-P1 and ferrocene-P2) through a Friedel-Crafts reaction between dimethoxymethane and ferrocene at two different ratios of 3:1 and 5:1 and 2) reaction of the ferrocene-MOPPs with phosphonium pentasulfide (P2S5). The photodegradation efficiencies of methylene blue (MB) and methyl orange (MO) toward FcLR-MOPPs were higher than those of the ferrocene-MOPPs. In contrast, the adsorption efficiencies of the dyes declined after the reaction of ferrocene-MOPPs with P2S5. In both cases, a higher photocatalytic activity and adsorption affinity were observed towards MB dye. When combined degradation/adsorption of dyes was investigated, a boosted dye elimination was observed for both the MOPP-based catalysts. FcLR-P1, as the optimal catalyst with the MB degradation/adsorption efficiency of 87.0 % ± 3.0, indicated a pseudo-first-order kinetic model for degradation of MB with a degradation rate constant of 0.074 min-1, a pseudo-second-order kinetic model and Langmuir isotherm for adsorption of MB, and high reusing after three cycles of use. A band gap energy (Eg) value of +2.3 eV was determined for FcLR-P1 via Tauc plots, consistent with the Eg value obtained from the cyclic voltammetry curves (+1.98 eV). Mott-Schottky plots consistent with radical trapping experiments indicated •OH species as the critical species in the MB photodegradation.

| S-EPMC11883355 | biostudies-literature

Advances in Conjugated Microporous Polymers.

Project description:Conjugated microporous polymers (CMPs) are a unique class of materials that combine extended π-conjugation with a permanently microporous skeleton. Since their discovery in 2007, CMPs have become established as an important subclass of porous materials. A wide range of synthetic building blocks and network-forming reactions offers an enormous variety of CMPs with different properties and structures. This has allowed CMPs to be developed for gas adsorption and separations, chemical adsorption and encapsulation, heterogeneous catalysis, photoredox catalysis, light emittance, sensing, energy storage, biological applications, and solar fuels production. Here we review the progress of CMP research since its beginnings and offer an outlook for where these materials might be headed in the future. We also compare the prospect for CMPs against the growing range of conjugated crystalline covalent organic frameworks (COFs).

| S-EPMC7145355 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data