Low-cost, scalable, and automated fluid sampling for fluidics applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Booeshaghi AS
PROVIDER: S-EPMC9123361 | biostudies-literature | 2021 Oct
REPOSITORIES: biostudies-literature
Publications
Low-cost, scalable, and automated fluid sampling for fluidics applications.
Booeshaghi A Sina AS Kil Yeokyoung Anne YA Min Kyung Hoi Joseph KHJ Gehring Jase J Pachter Lior L
HardwareX 20210531
We present colosseum, a low-cost, modular, and automated fluid sampling device for scalable fluidic applications. The colosseum fraction collector uses a single motor, can be built for less than $100 using off-the-shelf and 3D-printed components, and can be assembled in less than an hour. Build Instructions and source files are available at https://doi.org/10.5281/zenodo.4677604. ...[more]
Similar Datasets
Project description:A low cost, non-explosive process for the synthesis of graphene oxide (GO) is demonstrated. Using suitable choice of reaction parameters including temperature and time, this recipe does not require expensive membranes for filtration of carbonaceous and metallic residues. A pre-cooling protocol is introduced to control the explosive nature of the highly exothermic reactions during the oxidation process. This alleviates the requirement for expensive membranes and completely eliminates the explosive nature of intermediate reaction steps when compared to existing methods. High quality of the synthesized GO is corroborated using a host of characterization techniques including X-ray diffraction, optical spectroscopy, X-ray photoemission spectroscopy and current-voltage characteristics. Simple reduction protocol using ultra-violet light is demonstrated for potential application in the area of photovoltaics. Using different reduction protocols together with the proposed inexpensive method, reduced GO samples with tunable conductance over a wide range of values is demonstrated. Density functional theory is employed to understand the structure of GO. We anticipate that this scalable approach will catalyze large scale applications of GO.
| S-EPMC6089993 | biostudies-literature
Project description:Additive manufacturing affords precise control over geometries with high degrees of complexity and pre-defined structure. Lattices are one class of additive-only structures which have great potential in directing transport phenomena because they are highly ordered, scalable, and modular. However, a comprehensive description of how these structures scale and interact in heterogeneous systems is still undetermined. To advance this aim, we designed cubic and Kelvin lattices at two sub-5 mm length scales and compared published correlations to the experimental pressure gradient in pipes ranging from 12-52 mm diameter. We further investigated all combinations of the four lattices to evaluate segmented combinatorial behavior. The results suggest that a single correlation can describe pressure behavior for different lattice geometries and scales. Furthermore, combining lattice systems in series has a complex effect that is sensitive to part geometry. Together, these developments support the promise for tailored, modular lattice systems at laboratory scales and beyond.
| S-EPMC9012485 | biostudies-literature
Project description:Wastewater monitoring is a proven method for detecting viruses, illicit drug consumption, pharmaceutical use/abuse, water pollution, and the occurrence of antimicrobial resistance genes. Analyzing sewage water for pathogens like the SARS-Cov-2 virus could enable early detection of infected areas or virus variants. We developed a low-cost (∼US$1000), open-source, composite automatic water sampler with operational flexibility and simple data logging. Sample quantity is measured and cut off appropriately by continuously weighing the incoming liquid. Our system is customizable in both its hardware and firmware (via options and code modification) which allows for the device to be tailored easily to each application. For example, the user can input sampling quantities from 10 g per sample every 1.5 min to a single 2900 g sample after up to a 16-day delay prior to sampling. The outer diameter and height of the sampler are less than 0.5 m to fit in human-entry openings. We present experimental data for sample sizes of 10 g and 100 g at suction heights between 0.65 and 4.75 m.
| S-EPMC11925591 | biostudies-literature
Project description:RNA extraction has been improved by integration of a variety of materials in the protocol, such as phenol, guanidine thiocyanate, and silica, according to the case-specific demands. However, few methods have been designed for high-throughput RNA preparation for large-scale transcriptome studies. In this study, we established a high-throughput guanidinium thiocyanate and isopropyl alcohol based RNA extraction method (HighGI). HighGI is based on simple and phenol-free homemade buffers and the cost is substantially lower than a column-based commercial kit. We demonstrated that the quality and quantity of RNA extracted with HighGI were comparable to those extracted with a conventional phenol/chloroform-based method and a column-based commercial kit. HighGI retained small RNAs less than 200 bp, which are lost with a commercial column-based kit. We also demonstrated that HighGI is readily applicable to semi-automated RNA extraction. HighGI enables high-throughput RNA extraction for large-scale RNA preparation with high yield and quality.
| S-EPMC7495201 | biostudies-literature
Project description:Additive manufacturing or '3D printing' is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis.
| S-EPMC5302008 | biostudies-literature
Project description:Controlled integration of features that enhance the analytical performance of a sensor chip is a challenging task in the development of paper sensors. A critical issue in the fabrication of low-cost biosensor chips is the activation of the device surface in a reliable and controllable manner compatible with large-scale production. Here, we report stable, well-adherent, and repeatable site-selective deposition of bioreactive amine functionalities and biorepellant polyethylene glycol-like (PEG) functionalities on paper sensors by aerosol-assisted, atmospheric-pressure, plasma-enhanced chemical vapor deposition. This approach requires only 20 s of deposition time, compared to previous reports on cellulose functionalization, which takes hours. A detailed analysis of the near-edge X-ray absorption fine structure (NEXAFS) and its sensitivity to the local electronic structure of the carbon and nitrogen functionalities. σ*, π*, and Rydberg transitions in C and N K-edges are presented. Application of the plasma-processed paper sensors in DNA detection is also demonstrated.
| S-EPMC4278686 | biostudies-literature
Project description:Finding reliable discrete approximations of complex systems is a key prerequisite when applying many of the most popular modeling tools. Common discretization approaches (e.g., the very popular K-means clustering) are crucially limited in terms of quality, parallelizability, and cost. We introduce a low-cost improved quality scalable probabilistic approximation (SPA) algorithm, allowing for simultaneous data-driven optimal discretization, feature selection, and prediction. We prove its optimality, parallel efficiency, and a linear scalability of iteration cost. Cross-validated applications of SPA to a range of large realistic data classification and prediction problems reveal marked cost and performance improvements. For example, SPA allows the data-driven next-day predictions of resimulated surface temperatures for Europe with the mean prediction error of 0.75°C on a common PC (being around 40% better in terms of errors and five to six orders of magnitude cheaper than with common computational instruments used by the weather services).
| S-EPMC6989146 | biostudies-literature
Project description:Advances in single-cell genomics enable commensurate improvements in methods for uncovering lineage relations among individual cells. Current sequencing based methods for cell lineage analysis depend on low resolution bulk analysis or rely on extensive single cell sequencing which is not scalable and could be biased by functional dependencies. Here we show an integrated biochemical-computational platform for generic single-cell lineage analysis that is retrospective, cost-effective and scalable. It consists of a biochemical-computational pipeline that inputs individual cells, produces targeted single-cell sequencing data and uses it to generate a lineage tree of the input cells. We validated the platform by applying it to cells sampled from an ex vivo grown tree and analyzed its feasibility landscape by computer simulations. We conclude that the platform may serve as a generic tool for lineage analysis and thus pave the way towards large-scale human cell lineage discovery.
2016-04-18 | E-MTAB-4553 | biostudies-arrayexpress
Project description:The automated soft matter indenter (ASMI) is a platform for rapidly performing mechanical characterization of samples with elastic moduli in the range 7 kPa to 67 MPa with a sample acquisition time between 1 and 10 min. It is a low-cost system based upon open-source software, a modified mill, and an educational force sensor with a total bill of materials <$500. This system tests batches of up to 96 samples based on a standard well-plate sample holder without requiring any human intervention. Using the ASMI, users can obtain mechanical data in a programmable manner that enables high-throughput workflows, precisely testing time-dependent phenomena, and integration with other processing steps for closed-loop optimization.
| S-EPMC11564920 | biostudies-literature
Project description:Targeted sequencing remains a valuable technique for clinical and research applications. However, many existing technologies suffer from pervasive guanine-cytosine (GC) sequence content bias, high input DNA requirements, and high cost for custom panels. We have developed Cas12a-Capture, a low-cost and highly scalable method for targeted sequencing. The method utilizes preprogrammed guide RNAs to direct CRISPR-Cas12a cleavage of double-stranded DNA in vitro and then takes advantage of the resulting four to five nucleotide overhangs for selective ligation with a custom sequencing adapter. Addition of a second sequencing adapter and enrichment for ligation products generates a targeted sequence library. We first performed a pilot experiment with 7176 guides targeting 3.5 Mb of DNA. Using these data, we modeled the sequence determinants of Cas12a-Capture efficiency, then designed an optimized set of 11,438 guides targeting 3.0 Mb. The optimized guide set achieves an average 64-fold enrichment of targeted regions with minimal GC bias. Cas12a-Capture variant calls had strong concordance with Illumina Platinum Genome calls, especially for single nucleotide variants, which could be improved by applying basic variant quality heuristics. We believe Cas12a-Capture has a wide variety of potential clinical and research applications and is amendable for selective enrichment for any double-stranded DNA template or genome.
| S-EPMC9419982 | biostudies-literature