Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of cyclic α-pinane carbonate - a potential monomer for bio-based polymers.

ABSTRACT: This work reports the first known synthesis of α-pinane carbonate from an α-pinene derivative. Pinane carbonate is potentially useful as a monomer for poly(pinane carbonate), which would be a sustainable bio-based polymer. α-Pinene is a major waste product from the pulp and paper industries and the most naturally abundant monoterpene in turpentine oil. α-Pinene is routinely converted to pinene oxide and pinanediol, but no study has yet demonstrated the conversion of pinanediol into α-pinane carbonate. Here, α-pinane carbonate was synthesised via carboxylation of α-pinanediol with dimethyl carbonate under base catalysis using triazabicyclodecene guanidine (TBD). 81.1 ± 2.8% α-pinane carbonate yield was achieved at 98.7% purity. The produced α-pinane carbonate was a white crystalline solid with a melting point of 86 °C. It was characterised using FTIR, NMR, GCMS and a quadrupole time-of-flight (QTOF) mass spectrometer. The FTIR exhibited a C[double bond, length as m-dash]O peak at 1794 cm^-1 confirming the presence of a cyclic carbonate. GCMS showed that the α-pinane carbonate fragments with loss of CO₂, forming pinene epoxide. Base hydrolysis of the α-pinane carbonate using NaOH/ethanol/water regenerated the pinanediol with formations of Na₂CO₃.

SUBMITTER: Eze VC

PROVIDER: S-EPMC9192141 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Synthesis and Antimicrobial Activity of Sulfenimines Based on Pinane Hydroxythiols.

Project description:The widespread presence of multidrug-resistant pathogenic microorganisms challenges the development of novel chemotype antimicrobials, insensitive to microbial tools of resistance. To date, various monoterpenoids have been shown as potential antimicrobials. Among many classes of molecules with antimicrobial activity, terpenes and terpenoids are an attractive basis for the design of antimicrobials because of their low toxicity and availability for various modifications. In this work, we report on the synthesis of sulfenimines from chiral trifluoromethylated and non-fluorinated pinane-type thiols. Final compounds were obtained with yields of up to 81%. Among the 13 sulfenimines obtained, 3 compounds were able to repress the growth of both bacteria (S. aureus, both MSSA and MRSA; P. aeruginosa) and fungi (C. albicans) with an MIC of 8-32 µg/mL. Although compounds exhibited relatively high cytotoxicity (the therapeutic index of 3), their chemotype can be used as a starter point for the development of disinfectants and antiseptics for targeting multidrug-resistant pathogens.

| S-EPMC9686613 | biostudies-literature

Stereoselective synthesis and transformation of pinane-based 2-amino-1,3-diols.

Project description:A library of pinane-based 2-amino-1,3-diols was synthesised in a stereoselective manner. Isopinocarveol prepared from (-)-α-pinene was converted into condensed oxazolidin-2-one in two steps by carbamate formation followed by a stereoselective aminohydroxylation process. The relative stereochemistry of the pinane-fused oxazolidin-2-one was determined by 2D NMR and X-ray spectroscopic techniques. The regioisomeric spiro-oxazolidin-2-one was prepared in a similar way starting from the commercially available (1R)-(-)-myrtenol (10). The reduction or alkaline hydrolysis of the oxazolidines, followed by reductive alkylation resulted in primary and secondary 2-amino-1,3-diols, which underwent a regioselective ring closure with formaldehyde or benzaldehyde delivering pinane-condensed oxazolidines. During the preparation of 2-phenyliminooxazolidine, an interesting ring-ring tautomerism was observed in CDCl3.

| S-EPMC8111431 | biostudies-literature

Mechanism of cyclic carbonate synthesis from epoxides and CO2.

Project description:Three interconnected catalytic cycles account for the title reaction catalyzed by a bimetallic aluminum(salen) complex and Bu(4)NBr. In the first, Bu(4)NBr acts as a nucleophile to activate the epoxide. In the second, Bu(3)N generated in situ serves to activate CO(2). In the third, the aluminum(salen) complex brings the two activated species together so that the key bonds can be formed intramolecularly.

| S-EPMC2898159 | biostudies-literature

ATRP Synthesis of Sunflower Polymers using Cyclic Multimacroinitiators.

Project description:Polymers with advanced architectures can now be readily and reproducibly synthesized using controlled living polymerization. These materials are attractive as potential drug carriers due to their tunable size, versatile methods of drug incorporation and release, and ease of functionalization with targeting ligands. In this work, we report the design and development of macrocyclic brush, or "sunflower," polymers, synthesized by controlled radical polymerization of hydrophilic "petals" from a cyclic multimacroinitiator "core." These nanostructures can be synthesized with low polydispersity and controlled sizes depending on polymerization time. We further demonstrate that folate-functionalized sunflower polymers facilitate receptor-mediated uptake into cancer cells. These materials therefore show potential as drug carriers for anti-cancer therapies.

| S-EPMC4755328 | biostudies-literature

Synthesis of structurally controlled hyperbranched polymers using a monomer having hierarchical reactivity.

Project description:Hyperbranched polymers (HBPs) have attracted significant attention because of their characteristic topological structure associated with their unique physical properties compared with those of the corresponding linear polymers. Dendrimers are the most structurally controlled HBPs, but the necessity of a stepwise synthesis significantly limits their applications in materials science. Several methods have been developed to synthesize HBPs by a one-step procedure, as exemplified by the use of AB2 monomers and AB' inimers under condensation and self-condensing vinyl polymerization conditions. However, none of these methods provides structurally controlled HBPs over the three-dimensional (3D) structure, i.e., molecular weight, dispersity, number of branching points, branching density, and chain-end functionalities, except under special conditions. Here, we introduce a monomer design concept involving two functional groups with hierarchical reactivity and demonstrate the controlled synthesis of dendritic HBPs over the 3D structure by the copolymerization of the designed monomer and acrylates under living radical polymerization conditions.

| S-EPMC5709361 | biostudies-literature

Waterborne polymers and coatings from bio-based butenolides† † Electronic supplementary information (ESI) available: Extended discussions, experimental procedures, monomer and dispersion synthesis, characterisation, and coating properties. See DOI: https://doi.org/10.1039/d4gc03466j

Project description: Not available

| S-EPMC11333933 | biostudies-literature

Blocking-cyclization technique for precise synthesis of cyclic polymers with regulated topology.

Project description:Ring-closure and ring-expansion techniques are the two routes for extensive synthesis of cyclic polymers. Here, we report an alternative blocking-cyclization technique referred to as the third route to prepare cyclic polymers with regulated ring size and ring number by ring-opening metathesis polymerization of di- and monofunctional monomers in a one-pot process, where the polymer intermediates bearing two single-stranded blocks are efficiently cyclized by the cyclizing unit of propagated ladderphane to generate corresponding mono-, bis-, and tricyclic polymers, and the well-defined ladderphane structure plays a crucial role in forming the cyclic topology. Monocyclic polymer is further modified via Alder-ene reaction and the cyclic molecular topology is clearly demonstrated. The diversity features of cyclic polymers are comprehensively revealed. This strategy has broken through the limitations of previous two cyclizing routes, and indeed opens a facile and popular way to various cyclic polymers by commercial Grubbs catalyst and conventional metathesis polymerization.

| S-EPMC6294010 | biostudies-literature

Catalytic Enantioselective Synthesis of α-Difunctionalized Cyclic Sulfones.

Project description:As saturated heterocyclic building blocks become increasingly popular in medicinal chemistry and drug discovery programs, expansion of the synthetic toolkit to novel stereofunctionalized heterocycles is a priority. Herein, we report the development of a palladium-catalyzed decarboxylative asymmetric allylic alkylation reaction to access a broad range of enantioenriched α-difunctionalized 5- and 6-membered sulfones from easily accessible racemic starting materials. The allylic alkylation step was found to occur with high levels of enantioselectivity as a result of a palladium-mediated dynamic kinetic resolution of E/Z enolate intermediates. This methodology paves the way to hitherto unexplored stereodefined cyclic sulfones for medicinal chemistry applications.

| S-EPMC9490805 | biostudies-literature

Divergent Catalytic Strategies for the <i>Cis</i>/<i>Trans</i> Stereoselective Ring-Opening Polymerization of a Dual Cyclic Carbonate/Olefin Monomer.

Project description:A dual seven-membered cyclic carbonate/olefin monomer was synthesized from CO2 and cis-1,4-butenediol and polymerized. The properties of the polymer were controlled using divergent catalytic strategies toward the stereochemistry of the olefin. Ring-opening polymerization of the cyclic carbonate using an organocatalytic approach retained the cis-stereoconfiguration of the olefin and yielded a hard semicrystalline polymer (Tm 115 °C). Ring-opening metathesis polymerization using Grubbs' catalyst proceeded with high trans-stereoregularity (95%) and produced a soft amorphous polymer (Tg -22 °C). Cis to trans isomerization of the polymer was possible using Cu(I) salts under UV light. In all polymers, the C?C double bond remained available for postpolymerization modification and thermoset resins were formed by cross-linking. From this single monomer, cis-trans-cis triblock copolymers, with potential applications as thermoplastic elastomers, were synthesized by combining both strategies using cis-1,4-butenediol as a chain transfer agent.

| S-EPMC7007229 | biostudies-literature

One-step synthesis of sequence-controlled multiblock polymers with up to 11 segments from monomer mixture.

Project description:Switchable polymerization holds considerable potential for the synthesis of highly sequence-controlled multiblock. To date, this method has been limited to three-component systems, which enables the straightforward synthesis of multiblock polymers with less than five blocks. Herein, we report a self-switchable polymerization enabled by simple alkali metal carboxylate catalysts that directly polymerize six-component mixtures into multiblock polymers consisting of up to 11 blocks. Without an external trigger, the catalyst polymerization spontaneously connects five catalytic cycles in an orderly manner, involving four anhydride/epoxide ring-opening copolymerizations and one L-lactide ring-opening polymerization, creating a one-step synthetic pathway. Following this autotandem catalysis, reasonable combinations of different catalytic cycles allow the direct preparation of diverse, sequence-controlled, multiblock copolymers even containing various hyperbranched architectures. This method shows considerable promise in the synthesis of sequentially and architecturally complex polymers, with high monomer sequence control that provides the potential for designing materials.

| S-EPMC8748456 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data