Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Silane-Grafted MXene (Ti₃C₂T _X ) Membranes for Enhanced Water Purification Performance.

ABSTRACT: The current communication describes the modifications of MXene (Ti₃C₂T _x ) with silane grafting reaction for membrane preparation for enhanced water purification. The MXene was successfully grafted with n-octadecyltrichlorosilane (MODCS), n-octyltrichlorosilane (MNOCS), and triphenylchlorosilane (MTPCS) in order to make a hydrophobic MXene that could be able to bind with the organic matrix/polymers. The modified MXenes were transformed into thin membranes by forming an MXene/polyvinyl alcohol (PVA) composite over a filter paper support, that is, MCE (mixed cellulose ester filter paper). MXene membranes were also formed without the MCE support by using PVA and glutaraldehyde (PVA/GA) where GA was used as a cross-linker to stabilize PVA and make it water-resistant. The conditions of membrane formation were optimized to investigate optimum compatible conditions with the modified materials. The resulting membranes were tested for the removal of various organic pollutants that included mesitylene (or trimethylbenzene); polyaromatic hydrocarbons (chrysene, as a model); biphenyl; bisphenol A; benzene, toluene, ethylbenzene, and styrene; methylene blue; and Sudan II dyes. The MTPCS PVA/GA cross-linked membrane showed the best results for a pollutant removal efficiency up to 98%. Overall, all six types of membranes showed the removal efficiency in the range of 52-98%. It was observed that the membrane exhibits reusability up to five cycles.

SUBMITTER: Yousaf T

PROVIDER: S-EPMC9202267 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrathin Ti3C2Tx (MXene) Nanosheet-Wrapped NiSe2 Octahedral Crystal for Enhanced Supercapacitor Performance and Synergetic Electrocatalytic Water Splitting.

Project description:Metal selenides, such as NiSe2, have exhibited great potentials as multifunctional materials for energy storage and conversation. However, the utilization of pure NiSe2 as electrode materials is limited by its poor cycling stability, low electrical conductivity, and insufficient electrochemically active sites. To remedy these defects, herein, a novel NiSe2/Ti3C2Tx hybrid with strong interfacial interaction and electrical properties is fabricated, by wrapping NiSe2 octahedral crystal with ultrathin Ti3C2Tx MXene nanosheet. The NiSe2/Ti3C2Tx hybrid exhibits excellent electrochemical performance, with a high specific capacitance of 531.2 F g-1 at 1 A g-1 for supercapacitor, low overpotential of 200 mV at 10 mA g-1, and small Tafel slope of 37.7 mV dec-1 for hydrogen evolution reaction (HER). Furthermore, greater cycling stabilities for NiSe2/Ti3C2Tx hybrid in both supercapacitor and HER have also been achieved. These significant improvements compared with unmodified NiSe2 should be owing to the strong interfacial interaction between NiSe2 octahedral crystal and Ti3C2Tx MXene, which provides enhanced conductivity, fast charge transfer as well as abundant active sites, and highlight the promising potentials in combinations of MXene with metal selenides for multifunctional applications such as energy storage and conversion.

| S-EPMC7770682 | biostudies-literature

Hydrophilicity and surface charge modulation of Ti3C2T x MXene based membranes for water desalination.

Project description:Lamellar membranes obtained by stacking 2D layers possess ample transport pathways due to their intricate network of interlayer gaps. This makes them suitable for molecular separation applications. However, controlling the surface chemistry of the nanochannels within the membrane to tune the desired transport properties of water and ions is challenging. Ti3C2T x has been considered for water desalination because of its hydrophilic surface and negative surface charge. Most of the studies of Ti3C2T x membranes have presented promising salt rejection values in forward osmosis mode, which is less practical for water purification. Here, we investigate two types of reverse osmosis MXene-based lamellar membranes consisting of Ti3C2T x nanosheets hybridized with (i) WS2 nanosheets and (ii) polyvinyl phosphonic acid (PVPA). When hydrophilic and flexible Ti3C2T x nanosheets are interleaved with softer and more hydrophobic WS2 nanosheets in 2 : 1 mass ratio, nano capillaries with Janus chemistry are created with comparable rejection to bare Ti3C2T x membrane and threefold higher permeance values. Further, we find that decorating Ti3C2T x nanosheets with anionic polymers improves salt rejection. Our Ti3C2T x /PVPA composite membranes reject ∼97% of divalent ions and ∼80% of monovalent ions with ∼0.2 Lm-2 h-1 bar-1 of water permeance when tested with brackish water, and exhibit significantly improved chlorine resistance and cost benefits over the commercial Toray membranes.

| S-EPMC11229083 | biostudies-literature

2D/2D Heterojunction of R-scheme Ti3C2 MXene/MoS2 Nanosheets for Enhanced Photocatalytic Performance.

Project description:Combination of two-dimensional (2D) materials and semiconductors is considered to be an effective way for fabricating photocatalysts for solving the environmental pollution and energy crisis. In this work, novel 2D/2D heterojunction of R-scheme Ti3C2 MXene/MoS2 nanosheets is successfully synthesized by hydrothermal reaction. The photocatalytic activity of the Ti3C2 MXene/MoS2 composites is evaluated by photocatalytic degradation and hydrogen evolution reaction. Especially, 0.5 wt% Ti3C2 MXene/MoS2 sample exhibits optimum methyl orange (MO) degradation and H2 evolution rate of 97.4% and H2 evolution rate of 380.2 μmol h-1 g-1, respectively, which is attributed to the enhanced optical absorption ability and increased specific surface area. Additionally, Ti3C2 MXene coupled with MoS2 nanosheets is favorable for improving the photocurrent response and reducing the electrochemical impedance, leading to the enhanced electron transfer of excited semiconductor and inhibition of charge recombination. This work demonstrates that Ti3C2 MXene could be a promising carrier to construct 2D/2D heterojunction in photocatalytic degradation and hydrogen evolution reaction.

| S-EPMC7145887 | biostudies-literature

Soft Zr-doped TiO2 Nanofibrous Membranes with Enhanced Photocatalytic Activity for Water Purification.

Project description:Self-standing photocatalytic membranes constructed from TiO2 nanofibers hold great promise in environmental remediation; however, challenges still remained for the poor mechanical properties of polycrystalline TiO2 nanofibers. Herein, soft Zr-doped TiO2 (TZ) nanofibrous membranes with robust mechanical properties and enhanced photocatalytic activity were fabricated via electrospinning technique. The Zr4+ incorporation could effectively inhibit the grain growth and reduce the surface defects and breaking point of TiO2 nanofiber. The as-prepared TZ membranes were composed of well-interconnected nanofibers with a high aspect ratios, small grain size and pore size, which exhibited good tensile strength (1.32 MPa) and showed no obvious damage after 200 cycles of bending to a radius of 2 mm. A plausible bending deformation mechanism of the soft TZ membranes was proposed from microscopic single nanofiber to macroscopical membranes. Moreover, the resultant TZ membranes displayed better photocatalytic performance for methylene blue degradation compared to a commercial catalyst (P25), including high degradation degree of 95.4% within 30 min, good reusability in 5 cycles, and easiness of recycling. The successful preparation of such fascinating materials may open up new avenues for the design and development of soft TiO2-based membranes for various application.

| S-EPMC5431652 | biostudies-literature

Synergy of Nb Doping and Surface Alloy Enhanced on Water-Alkali Electrocatalytic Hydrogen Generation Performance in Ti-Based MXene.

Project description:Presented are the theoretical calculation and experimental studies of a Ti3C2T x MXene-based nanohybrid with simultaneous Nb doping and surface transition metal alloy modification. Guided by the density functional theory calculation, the Nb doping can move up the Fermi energy level to the conduction band, thus enhancing the electronic conductivity. Meanwhile, the surface modification by Ni/Co alloy can moderate the surface M-H affinity, which will further enhance the hydrogen evolution reaction (HER) activity. A series of Ni/Co alloy attached on Nb-doped Ti3C2T x MXene nanohybrids (denoted as NiCo@NTM) are successfully prepared. As expected, the Ni0.9Co0.1@ NTM nanohybrids present an extraordinary HER activity in alkaline solution, which only needs an overpotential (η) of 43.4 mV to reach the current density of 10 mA cm-2 in 1 m KOH solution and shows good stability. The performance of the Ni0.9Co0.1@ NTM nanohybrids is comparable to the commercial 10% Pt/C electrode (34.4 mV@10 mA cm-2) and is better than most state-of-the-art Pt-free HER catalysts. Inspired by the facile synthesis process and chemical versatility of both MXene and transition metal alloys, the nanohybrids reported here are promising non-noble metal electrocatalysts for water-alkali electrolysis.

| S-EPMC6548967 | biostudies-literature

Boosting Transport Kinetics of Ions and Electrons Simultaneously by Ti3C2Tx (MXene) Addition for Enhanced Electrochromic Performance.

Project description:Electrochromic technology plays a significant role in energy conservation, while its performance is greatly limited by the transport behavior of ions and electrons. Hence, an electrochromic system with overall excellent performances still need to be explored. Initially motivated by the high ionic and electronic conductivity of transition metal carbide or nitride (MXene), we design a feasible procedure to synthesize the MXene/WO3-x composite electrochromic film. The consequently boosted electrochromic performances prove that the addition of MXene is an effective strategy for simultaneously enhancing electrons and ions transport behavior in electrochromic layer. The MXene/WO3-x electrochromic device exhibits enhanced transmittance modulation and coloration efficiency (60.4%, 69.1 cm2 C-1), higher diffusion coefficient of Li+ and excellent cycling stability (200 cycles) over the pure WO3-x device. Meanwhile, numerical stimulation theoretically explores the mechanism and kinetics of the lithium ion diffusion, and proves the spatial and time distributions of higher Li+ concentration in MXene/WO3-x composite electrochromic layer. Both experiments and theoretical data reveal that the addition of MXene is effective to promote the transport kinetics of ions and electrons simultaneously and thus realizing a high-performance electrochromic device. This work opens new avenues for electrochromic materials design and deepens the study of kinetics mechanism of ion diffusion in electrochromic devices.

| S-EPMC8187520 | biostudies-literature

Ion Selectivity, Current, and Water Flow Regulation in Ti3C2 MXene Nanopores.

Project description:Recent years have seen a growing interest in zero-dimensional (0D) transport phenomena occurring across two-dimensional (2D) materials for their potential applications to nanopore technology such as ion separation and molecular sensing. Herein, we investigate ion transport through 1 nm-wide nanopores in Ti3C2 MXene using molecular dynamics simulations. The high polarity and fish-bone arrangement of the Ti3C2 MXene offer a built-in potential and an atomic-scale distortion to the nanopore, causing an adsorption preference for cations. Our observation of variable cation-specific ion selectivity and Coulomb blockade highlights the complex interplay between adsorption affinity and cation size. The cation-specific ion selectivity can induce both the ion current and electro-osmotic water transmission, which can be regulated by tailoring the ions' preferential pathways through electric field tilting. Our finding underscores the pivotal role of the atomic arrangement of MXenes in 0D ion transport and provides fundamental insight into the application of 2D material in nanopores-based technologies.

| S-EPMC11311525 | biostudies-literature

Ru(II) Complex Grafted Ti3C2Tx MXene Nano Sheet with Photothermal/Photodynamic Synergistic Antibacterial Activity.

Project description:For a long time, the emergence of microbial drug resistance due to the abuse of antibiotics has greatly reduced the therapeutic effect of many existing antibiotics. This makes the development of new antimicrobial materials urgent. Light-assisted antimicrobial therapy is an alternative to antibiotic therapy due to its high antimicrobial efficiency and non-resistance. Here, we develop a nanocomposite material (Ru@MXene) which is based on Ru(bpy)(dcb)2+ connected to MXene nanosheets by ester bonding as a photothermal/photodynamic synergistic antibacterial material. The obtained Ru@MXene nanocomposites exhibit a strengthened antimicrobial capacity compared to Ru or MXene alone, which can be attributed to the higher reactive oxygen species (ROS) yield and the thermal effect. Once exposed to a xenon lamp, Ru@MXene promptly achieved almost 100% bactericidal activity against Escherichia coli (200 μg/mL) and Staphylococcus aureus (100 μg/mL). This is ascribed to its synergistic photothermal therapy (PTT) and photodynamic therapy (PDT) capabilities. Consequently, the innovative Ru@MXene can be a prospective non-drug antimicrobial therapy that avoids antibiotic resistance in practice. Notably, this high-efficiency PTT/PDT synergistic antimicrobial material by bonding Ru complexes to MXene is the first such reported model. However, the toxic effects of Ru@MXene materials need to be studied to evaluate them for further medical applications.

| S-EPMC10051588 | biostudies-literature

Metal-coordinated sub-10 nm membranes for water purification.

Project description:Ultrathin membranes with potentially high permeability are urgently demanded in water purification. However, their facile, controllable fabrication remains a grand challenge. Herein, we demonstrate a metal-coordinated approach towards defect-free and robust membranes with sub-10 nm thickness. Phytic acid, a natural strong electron donor, is assembled with metal ion-based electron acceptors to fabricate metal-organophosphate membranes (MOPMs) in aqueous solution. Metal ions with higher binding energy or ionization potential such as Fe3+ and Zr4+ can generate defect-free structure while MOPM-Fe3+ with superhydrophilicity is preferred. The membrane thickness is minimized to 8 nm by varying the ligand concentration and the pore structure of MOPM-Fe3+ is regulated by varying the Fe3+ content. The membrane with optimized MOPM-Fe3+ composition exhibits prominent water permeance (109.8 L m-2 h-1 bar-1) with dye rejections above 95% and superior stability. This strong-coordination assembly may enlighten the development of ultrathin high-performance membranes.

| S-EPMC6744495 | biostudies-literature

Two-dimensional MXene membranes with biomimetic sub-nanochannels for enhanced cation sieving.

Project description:Membranes with high ion permeability and selectivity are of considerable interest for sustainable water treatment, resource extraction and energy storage. Herein, inspired by K+ channel of streptomyces A (KcsA K+), we have constructed cation sieving membranes using MXene nanosheets and Ethylenediaminetetraacetic acid (EDTA) molecules as building blocks. Numerous negatively charged oxygen atoms of EDTA molecules and 6.0 Å two-dimensional (2D) sub-nanochannel of MXene nanosheets enable biomimetic channel size, chemical groups and tunable charge density for the resulting membranes. The membranes show the capability to recognize monovalent/divalent cations, achieving excellent K+/Mg2+ selectivity of 121.2 using mixed salt solution as the feed, which outperforms other reported membranes under similar testing conditions and transcends the current upper limit. Characterization and simulations indicate that the cation recognition effect of EDTA and partial dehydration effects play critical roles in cations selective sieving and increasing the local charge density within the sub-nanochannel significantly improves cation selectivity. Our findings provide a theoretical basis for ions transport in sub-nanochannels and an alternative strategy for design ions separation membranes.

| S-EPMC10427654 | biostudies-literature