Dataset Information

Flexible bioelectronic device fabricated by conductive polymer-based living material.

ABSTRACT: Living materials are worked as an inside collaborative system that could naturally respond to changing environmental conditions. The regulation of bioelectronic processes in living materials could be effective for collecting biological signals and detecting biomarkers. Here, we constructed a living material with conjugated polymers poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene chloride] (PMNT) and Shewanella oneidensis MR-1 biofilm. In addition, the living material was integrated as a flexible bioelectronic device for lactate detection in physiological fluids (sweat, urine, and plasma). Owing to the electroconductivity of conjugated polymers, PMNT could optimize the bioelectronic process in the living material. The collected electrical signal could be wirelessly transferred to a portable smartphone for reading and analyzing. Because lactate is also a biomarker for cancer treatment, the flexible bioelectronic device was further used to detect and count the cancer cells. The proof of the bioelectronic device using conductive polymer-based living material exhibits promising applications in the next-generation personal health monitoring systems.

SUBMITTER: Wang Z

PROVIDER: S-EPMC9216517 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Soft and pliable conductive polymer composites hold promise for application as bioelectronic interfaces such as for electroencephalography (EEG). In clinical, laboratory, and real-world EEG there is a desire for dry, soft, and comfortable interfaces to the scalp that are capable of relaying the μV-level scalp potentials to signal processing electronics. A key challenge is that most material approaches are sensitive to deformation-induced shifts in electrical impedance associated with decreased signal-to-noise ratio. This is a particular concern in real-world environments where human motion is present. The entire set of brain information outside of tightly controlled laboratory or clinical settings are currently unobtainable due to this challenge. Here we explore the performance of an elastomeric material solution purposefully designed for dry, soft, comfortable scalp contact electrodes for EEG that is specifically targeted to have flat electrical impedance response to deformation to enable utilization in real world environments. A conductive carbon nanofiber filled polydimethylsiloxane (CNF-PDMS) elastomer was evaluated at three fill ratios (3, 4 and 7 volume percent). Electromechanical testing data is presented showing the influence of large compressive deformations on electrical impedance as well as the impact of filler loading on the elastomer stiffness. To evaluate usability for EEG, pre-recorded human EEG signals were replayed through the contact electrodes subjected to quasi-static compressive strains between zero and 35%. These tests show that conductive filler ratios well above the electrical percolation threshold are desirable in order to maximize signal-to-noise ratio and signal correlation with an ideal baseline. Increasing fill ratios yield increasingly flat electrical impedance response to large applied compressive deformations with a trade in increased material stiffness, and with nominal electrical impedance tunable over greater than 4 orders of magnitude. EEG performance was independent of filler loading above 4 vol % CNF (< 103 ohms).

Dataset Information

Flexible bioelectronic device fabricated by conductive polymer-based living material.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets