Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photovoltaic Performances of Dye-Sensitized Solar Cells Based on Modified Polybutadiene Matrix Electrolytes by Sol-Gel Process.

ABSTRACT: A new type of polymer matrix electrolyte based on modified polybutadiene (modified PB) was developed for dye-sensitized solar cells (DSSCs) to improve their stability. The modified PB was fabricated by cross-linking the reaction of polybutadiene with siloxane groups as a substitute sol-gel process. A DSSC device using the modified PB matrix electrolyte showed an open-circuit voltage of 0.64 V, a short-circuit current density of 15.00 mA/cm², and a fill factor of 0.58 under photointensity of 100 mW/cm² at AM 1.5, consequently leading to an overall solar energy conversion efficiency of 5.49%. The DSSC device using the modified PB matrix electrolyte improved the conductivity, and the charge transfer ability showed the outstanding stability of the device.

SUBMITTER: Kim MR

PROVIDER: S-EPMC9229922 | biostudies-literature | 2022 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Photovoltaic Performances of Dye-Sensitized Solar Cells Based on Modified Polybutadiene Matrix Electrolytes by Sol-Gel Process.

Kim Mi-Ra MR Pham Thanh Chung TC Yang Hyun-Seock HS Park Sung Heum SH Lee Songyi S

Polymers 20220609 12

A new type of polymer matrix electrolyte based on modified polybutadiene (modified PB) was developed for dye-sensitized solar cells (DSSCs) to improve their stability. The modified PB was fabricated by cross-linking the reaction of polybutadiene with siloxane groups as a substitute sol-gel process. A DSSC device using the modified PB matrix electrolyte showed an open-circuit voltage of 0.64 V, a short-circuit current density of 15.00 mA/cm<sup>2</sup>, and a fill factor of 0.58 under photointens ...[more]

PMID: 35745917

Similar Datasets

Sol-Gel Processed TiO2 Nanotube Photoelectrodes for Dye-Sensitized Solar Cells with Enhanced Photovoltaic Performance.

Project description:The performance of dye-sensitized solar cells (DSCs) critically depends on the efficiency of electron transport within the TiO2-dye-electrolyte interface. To improve the efficiency of the electron transfer the conventional structure of the working electrode (WE) based on TiO2 nanoparticles (NPs) was replaced with TiO2 nanotubes (NTs). Sol-gel method was used to prepare undoped and Nb-doped TiO2 NPs and TiO2 NTs. The crystallinity and morphology of the WEs were characterized using XRD, SEM and TEM techniques. XPS and PL measurements revealed a higher concentration of oxygen-related defects at the surface of NPs-based electrodes compared to that based on NTs. Replacement of the conventional NPs-based TiO2 WE with alternative led to a 15% increase in power conversion efficiency (PCE) of the DSCs. The effect is attributed to the more efficient transfer of charge carriers in the NTs-based electrodes due to lower defect concentration. The suggestion was confirmed experimentally by electrical impedance spectroscopy measurements when we observed the higher recombination resistance at the TiO2 NTs-electrolyte interface compared to that at the TiO2 NPs-electrolyte interface. Moreover, Nb-doping of the TiO2 structures yields an additional 14% PCE increase. The application of Nb-doped TiO2 NTs as photo-electrode enables the fabrication of a DSC with an efficiency of 8.1%, which is 35% higher than that of a cell using a TiO2 NPs. Finally, NTs-based DSCs have demonstrated a 65% increase in the PCE value, when light intensity was decreased from 1000 to 10 W/m2 making such kind device be promising alternative indoor PV applications when the intensity of incident light is low.

| S-EPMC7075133 | biostudies-literature

Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods.

Project description:At an elevated temperature of 90 °C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3- ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time.

| S-EPMC6956303 | biostudies-literature

Unveiling iodine-based electrolytes chemistry in aqueous dye-sensitized solar cells.

Project description:Aqueous dye-sensitized solar cells (DSSCs) have recently emerged as promising systems, which can combine low cost and environmental compatibility with appreciable efficiency, long-term durability and enhanced safety. In the present study, we thoroughly investigate the chemistry behind the iodide/triiodide-based redox mediator, which presents - in a completely aqueous environment - several differences when compared to the behavior observed in the conventionally used organic solvents. The speciation of ions, the effect of the concentration of the redox mediator and the type of counter-ion are characterized from the electrochemical, spectroscopic, photovoltaic and analytical viewpoints. Furthermore, we demonstrate that aqueous DSSCs, often assumed as unstable, hold the potential to assure unparalleled stability after five months of aging without any addition of stabilizers or gelling agents, thus envisaging the construction of eco-friendly photovoltaic devices free of expensive, flammable and toxic solvents.

| S-EPMC6014110 | biostudies-literature

Dye molecules in electrolytes: new approach for suppression of dye-desorption in dye-sensitized solar cells

Project description:The widespread commercialization of dye-sensitized solar cells remains limited because of the poor long-term stability. We report on the influence of dye-molecules added in liquid electrolyte on long-term stability of dye-sensitized solar cells. Dye-desorption from the TiO2 surface during long-term cycling is one of the decisive factors that degrade photocurrent densities of devices which in turn determine the efficiencies of the devices. For the first time, desorption of dye from the TiO2 surface could be suppressed by controlling thermodynamic equilibrium; by addition of dye molecules in the electrolyte. The dye molecules in the electrolyte can suppress the driving forces for the adsorbed dye molecules to be desorbed from TiO2 nanoparticles. As a result, highly enhanced device stabilities were achieved due to the reduction of dye-desorption although there was a little decrease in the initial efficiencies.

| S-EPMC3634105 | biostudies-literature

Effect of Cross-Linking on the Performances of Starch-Based Biopolymer as Gel Electrolyte for Dye-Sensitized Solar Cell Applications.

Project description:Dye-sensitized solar cells (DSSCs) have become a validated and economically credible competitor to the traditional solid-state junction photovoltaic devices. DSSCs based on biopolymer gel electrolyte systems offer the perspective of competitive conversion efficiencies with a very low-cost fabrication. In this paper, a new starch-based biopolymer gel electrolyte system is prepared by mixing lithium iodide and iodine with bare and citric acid cross-linked potato starches with glycerol as the plasticizing agent. The effect of the preparation methods on the starch cross-linking degree as well as the photoconversion efficiency of the resulting DSSC cells is carefully analyzed. Fourier transform spectroscopy, X-ray diffraction, and scanning electron microscopy were used to characterize the morphology and conformational changes of starch in the electrolytes. The conductivity of the biopolymer electrolytes was determined by electrochemical impedance spectroscopy. DSSC based on the starch-gel polymer electrolytes were characterized by photovoltaic measurements and electrochemical impedance spectroscopy. Results clearly show that the cross-linking increases the recombination resistance and open circuit voltage (VOC) of the DSSC, and thereby the photoconversion efficiency of the cell. In particular, electrolytes containing 1.4 g bare and cross-linked starches showed ionic conductivities of σ = 1.61, 0.59, 0.38, and 0.35 S cm-1, and the corresponding DSSCs showed efficiencies of 1.2, 1.4, 0.93, and 1.11%, respectively.

| S-EPMC6418899 | biostudies-literature

Hydrogel Electrolytes Based on Xanthan Gum: Green Route towards Stable Dye-Sensitized Solar Cells.

Project description:The investigation of innovative electrolytes based on nontoxic and nonflammable solvents is an up-to-date, intriguing challenge to push forward the environmental sustainability of dye-sensitized solar cells (DSSCs). Water is one of the best choices, thus 100% aqueous electrolytes are proposed in this work, which are gelled with xanthan gum. This well-known biosourced polymer matrix is able to form stable and easily processable hydrogel electrolytes based on the iodide/triiodide redox couple. An experimental strategy, also supported by the multivariate chemometric approach, is used here to study the main factors influencing DSSCs efficiency and stability, leading to an optimized system able to improve its efficiency by 20% even after a 1200 h aging test, and reaching an overall performance superior to 2.7%. In-depth photoelectrochemical investigation demonstrates that DSSCs performance based on hydrogel electrolytes depends on many factors (e.g., dipping conditions, redox mediator concentrations, etc.), that must be carefully quantified and correlated in order to optimize these hydrogels. Photovoltaic performances are also extremely reproducible and stable in an open cell filled in air atmosphere, noticeably without any vacuum treatments.

| S-EPMC7466386 | biostudies-literature

Choline chloride-based deep eutectic solvents as effective electrolytes for dye-sensitized solar cells.

Project description:Electrolytes for dye-sensitized solar cells remain a challenge for large-scale production and commercialization, hindering the wide application of solar cells. We have developed two new electrolyte-based deep eutectic solvents using a mixture of choline chloride with urea and with ethylene glycol for dye-sensitized solar cells. The prominent features of the two deep eutectic solvent electrolytes are simple preparation for large-scale production with inexpensive, available, and nontoxic starting materials and biodegradability. The solar cell devices proceeded in a safe manner as the two deep eutectic solvents afforded low-cost technology and comparative conversion efficiency to a popular ionic liquid, namely 1-ethyl-3-methylimidazolium tetracyanoborate. Results showed that devices with choline chloride and urea electrolyte exhibited improved open circuit voltage values (V OC), while the ones with choline chloride and ethylene glycol showed an increase in the short circuit current (I sc). Characterization of the devices by electrochemical impedance spectroscopy helped explain the effects of their molecular structures on the enhancement of either V OC or I sc values. These new solvents expand the electrolyte choices for designing dye-sensitized solar cells, especially for the purpose of using low-cost and eco-friendly materials for massive production.

| S-EPMC9034084 | biostudies-literature

Enhanced photovoltaic properties in dye sensitized solar cells by surface treatment of SnO2 photoanodes.

Project description:We report the fabrication and testing of dye sensitized solar cells (DSSC) based on tin oxide (SnO2) particles of average size ~20 nm. Fluorine-doped tin oxide (FTO) conducting glass substrates were treated with TiOx or TiCl4 precursor solutions to create a blocking layer before tape casting the SnO2 mesoporous anode. In addition, SnO2 photoelectrodes were treated with the same precursor solutions to deposit a TiO2 passivating layer covering the SnO2 particles. We found that the modification enhances the short circuit current, open-circuit voltage and fill factor, leading to nearly 2-fold increase in power conversion efficiency, from 1.48% without any treatment, to 2.85% achieved with TiCl4 treatment. The superior photovoltaic performance of the DSSCs assembled with modified photoanode is attributed to enhanced electron lifetime and suppression of electron recombination to the electrolyte, as confirmed by electrochemical impedance spectroscopy (EIS) carried out under dark condition. These results indicate that modification of the FTO and SnO2 anode by titania can play a major role in maximizing the photo conversion efficiency.

| S-EPMC4796906 | biostudies-literature

Photon Upconverted Emission Based on Dye-Sensitized Triplet-Triplet Annihilation in Silica Sol-Gel System.

Project description:Photon upconverted emission based on dye-sensitized triplet-triplet annihilation was observed in silica gel systems containing Pt(II) octaethylporphyrin (triplet sensitizer) and 9,10-diphenylanthracene (singlet emitter). The triplet sensitizer was encapsulated and highly dispersed in the silica gels prepared by the sol-gel method. The singlet emitter was adsorbed on the silica gel pores accessible to the outside. Phosphorescence of the triplet sensitizer was partially quenched, and the singlet emission was enhanced with an increase in the concentration of the singlet emitter. The emission intensity increased in proportion to the approximate square of the irradiation power. The triplet energy transfer from some of the encapsulated triplet sensitizer molecules to the adsorbed singlet emitter molecules was observed in the silica gels followed by the triplet-triplet annihilation and upconverted singlet emission. The phosphorescence quenching and upconverted singlet emission were more significantly observed in the gel dried at a lower temperature (wetter gel). The wetter gel contained higher amounts of solvent and water molecules, in which the triplet sensitizer and singlet emitter should collide and then the sensitized emitters should collide between themselves during their excited-state lifetime. The photon upconversion process required the triplet sensitizer and singlet emitter molecules to be in an environment similar to the solvents.

| S-EPMC6645023 | biostudies-literature

An atomistic picture of the regeneration process in dye sensitized solar cells.

Project description:A highly efficient mechanism for the regeneration of the cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)-ruthenium(II) sensitizing dye (N3) by I(-) in acetonitrile has been identified by using molecular dynamics simulation based on density functional theory. Barrier-free complex formation of the oxidized dye with both I(-) and , and facile dissociation of and from the reduced dye are key steps in this process. In situ vibrational spectroscopy confirms the reversible binding of I(2) to the thiocyanate group. Additionally, simulations of the electrolyte near the interface suggest that acetonitrile is able to cover the (101) surface of anatase with a passivating layer that inhibits direct contact of the redox mediator with the oxide, and that the solvent structure specifically enhances the concentration of I(-) at a distance which further favors rapid dye regeneration.

| S-EPMC2841933 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data