Dataset Information

Oxidoreduction potential controlling for increasing the fermentability of enzymatically hydrolyzed steam-exploded corn stover for butanol production.

ABSTRACT:

Background

Lignocellulosic biomass is recognized as an effective potential substrate for biobutanol production. Though many pretreatment and detoxification methods have been set up, the fermentability of detoxicated lignocellulosic substrate is still far lower than that of starchy feedstocks. On the other hand, the number of recent efforts on rational metabolic engineering approaches to increase butanol production in Clostridium strains is also quite limited, demonstrating the physiological complexity of solventogenic clostridia. In fact, the strain performance is greatly impacted by process control. developing efficient process control strategies could be a feasible solution to this problem.

Results

In this study, oxidoreduction potential (ORP) controlling was applied to increase the fermentability of enzymatically hydrolyzed steam-exploded corn stover (SECS) for butanol production. When ORP of detoxicated SECS was controlled at - 350 mV, the period of fermentation was shortened by 6 h with an increase of 27.5% in the total solvent (to 18.1 g/L) and 34.2% in butanol (to 10.2 g/L) respectively. Silico modeling revealed that the fluxes of NADPH, NADH and ATP strongly differed between the different scenarios. Quantitative analysis showed that intracellular concentrations of ATP, NADPH/NADP⁺, and NADH/NAD⁺ were increased by 25.1%, 81.8%, and 62.5%. ORP controlling also resulted in a 2.1-fold increase in butyraldehyde dehydrogenase, a 1.2-fold increase in butanol dehydrogenase and 29% increase in the cell integrity.

Conclusion

ORP control strategy effectively changed the intracellular metabolic spectrum and significantly improved Clostridium cell growth and butanol production. The working mechanism can be summarized into three aspects: First, Glycolysis and TCA circulation pathways were strengthened through key nodes such as pyruvate carboxylase [EC: 6.4.1.1], which provided sufficient NADH and NADPH for the cell. Second, sufficient ATP was provided to avoid "acid crash". Third, the key enzymes activities regulating butanol biosynthesis and cell membrane integrity were improved.

SUBMITTER: Xia M

PROVIDER: S-EPMC9238237 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BACKGROUND:A two-stage chemical pretreatment of corn stover is investigated comprising an NaOH pre-extraction followed by an alkaline hydrogen peroxide (AHP) post-treatment. We propose that conventional one-stage AHP pretreatment can be improved using alkaline pre-extraction, which requires significantly less H2O2 and NaOH. To better understand the potential of this approach, this study investigates several components of this process including alkaline pre-extraction, alkaline and alkaline-oxidative post-treatment, fermentation, and the composition of alkali extracts. RESULTS:Mild NaOH pre-extraction of corn stover uses less than 0.1 g NaOH per g corn stover at 80°C. The resulting substrates were highly digestible by cellulolytic enzymes at relatively low enzyme loadings and had a strong susceptibility to drying-induced hydrolysis yield losses. Alkaline pre-extraction was highly selective for lignin removal over xylan removal; xylan removal was relatively minimal (~20%). During alkaline pre-extraction, up to 0.10 g of alkali was consumed per g of corn stover. AHP post-treatment at low oxidant loading (25 mg H2O2 per g pre-extracted biomass) increased glucose hydrolysis yields by 5%, which approached near-theoretical yields. ELISA screening of alkali pre-extraction liquors and the AHP post-treatment liquors demonstrated that xyloglucan and ?-glucans likely remained tightly bound in the biomass whereas the majority of the soluble polymeric xylans were glucurono (arabino) xylans and potentially homoxylans. Pectic polysaccharides were depleted in the AHP post-treatment liquor relative to the alkaline pre-extraction liquor. Because the already-low inhibitor content was further decreased in the alkaline pre-extraction, the hydrolysates generated by this two-stage pretreatment were highly fermentable by Saccharomyces cerevisiae strains that were metabolically engineered and evolved for xylose fermentation. CONCLUSIONS:This work demonstrates that this two-stage pretreatment process is well suited for converting lignocellulose to fermentable sugars and biofuels, such as ethanol. This approach achieved high enzymatic sugars yields from pretreated corn stover using substantially lower oxidant loadings than have been reported previously in the literature. This pretreatment approach allows for many possible process configurations involving novel alkali recovery approaches and novel uses of alkaline pre-extraction liquors. Further work is required to identify the most economical configuration, including process designs using techno-economic analysis and investigating processing strategies that economize water use.

Project description:BackgroundCorn stover is lignocellulosic biomass that has potential to be used as raw material for bioethanol production. In the current research, dilute ammonia pretreatment was used to improve the accessibility of corn stover carbohydrates to subsequently added hydrolytic enzymes. Some carbohydrates, however, were still present after enzymatic hydrolysis and fermentation. Hence, this research was aimed to characterise the recalcitrant carbohydrates, especially the oligosaccharides that remained after hydrolysis and fermentation of dilute ammonia-pretreated corn stover (DACS).ResultsAbout 35% (w/w) of DACS carbohydrates remained after enzymatic hydrolysis and fermentation of the released monosaccharides. One-third of these recalcitrant carbohydrates were water soluble and composed of diverse oligosaccharides. By using UHPLC-MS n , more than 50 oligosaccharides were detected. Glucurono-xylooligosaccharides (UAXOS) with a degree of polymerisation (DP) less than 5 were the most abundant oligosaccharides. The (4-O-methyl) glucuronosyl substituent was mostly attached onto the terminal xylosyl residue. It was shown that the glucuronosyl substituent in some UAXOS was modified into a hexenuronosyl, a glucuronamide or a hexenuronamide residue due to the dilute ammonia pretreatment. Another group of abundant oligosaccharides comprised various xyloglucan oligosaccharides (XGOS), with a DP 5 annotated as XXG as the most pronounced. In addition, disaccharides annotated as xylosyl-glucose with different ? linkages as well as larger carbohydrates were present in the fermentation slurry.ConclusionsAround one-third of the 35% (w/w) recalcitrant DACS carbohydrates remained as water-soluble saccharides. In this study, more than 50 recalcitrant oligosaccharides were detected, which mostly composed of xylosyl and/or glucosyl residues. The most pronounced oligosaccharides were UAXOS and XGOS. Hence, ?-glucuronidase and ?-xylosidase were suggested to be added to the enzyme mixture to degrade these oligosaccharides further, and hence the fermentation yield is potentially increased.

Project description:BackgroundEfficient and economically viable production of biofuels from lignocellulosic biomass is dependent on mechanical and chemical pretreatment and enzymatic hydrolysis of plant material. These processing steps yield simple sugars as well as plant-derived and process-added organic acids, sugar-derived dehydration products, aldehydes, phenolics and other compounds that inhibit the growth of many microorganisms. Lipomyces starkeyi is an oleaginous yeast capable of robust growth on a variety of sugars and lipid accumulation on pretreated lignocellulosic substrates making it attractive as an industrial producer of biofuels. Here, we examined gene expression during batch growth and lipid accumulation in a 20-L bioreactor with either a blend of pure glucose and xylose or pretreated corn stover (PCS) that had been enzymatically hydrolyzed as the carbon sources.ResultsWe monitored sugar and ammonium utilization as well as biomass accumulation and found that growth of L. starkeyi is inhibited with PCS hydrolysate as the carbon source. Both acetic acid and furfural are present at concentrations toxic to L. starkeyi in PCS hydrolysate. We quantified gene expression at seven time-points for each carbon source during batch growth and found that gene expression is similar at physiologically equivalent points. Analysis of promoter regions revealed that gene expression during the transition to lipid accumulation is regulated by carbon and nitrogen catabolite repression, regardless of carbon source and is associated with decreased expression of the translation machinery and suppression of the cell cycle. We identified 73 differentially expressed genes during growth phase in the bioreactor that may be involved in detoxification of corn stover hydrolysate.ConclusionsGrowth of L. starkeyi is inhibited by compounds present in PCS hydrolysate. Here, we monitored key metabolites to establish physiologically equivalent comparisons during a batch bioreactor run comparing PCS hydrolysate and purified sugars. L. starkeyi's response to PCS hydrolysate is primarily at the beginning of the run during growth phase when inhibitory compounds are presumably at their highest concentration and inducing the general detoxification response by L. starkeyi. Differentially expressed genes identified herein during growth phase will aid in the improvement of industrial strains capable of robust growth on substrates containing various growth inhibitory compounds.

Project description:Producing biobutanol from lignocellulosic biomass has shown promise to ultimately reduce greenhouse gases and alleviate the global energy crisis. However, because of the recalcitrance of a lignocellulosic biomass, a pretreatment of the substrate is needed which in many cases releases soluble lignin compounds (SLCs), which inhibit growth of butanol-producing clostridia. In this study, we found that SLCs changed the acetone/butanol ratio (A/B ratio) during butanol fermentation. The typical A/B molar ratio during Clostridium beijerinckii NCIMB 8052 batch fermentation with glucose as the carbon source is about 0.5. In the present study, the A/B molar ratio during batch fermentation with a lignocellulosic hydrolysate as the carbon source was 0.95 at the end of fermentation. Structural and redox potential changes of the SLCs were characterized before and after fermentation by using gas chromatography/mass spectrometry and electrochemical analyses, which indicated that some exogenous SLCs were involved in distributing electron flow to C. beijerinckii, leading to modulation of the redox balance. This was further demonstrated by the NADH/NAD+ ratio and trxB gene expression profile assays at the onset of solventogenic growth. As a result, the A/B ratio of end products changed significantly during C. beijerinckii fermentation using corn stover-derived hydrolysate as the carbon source compared to glucose as the carbon source. These results revealed that SLCs not only inhibited cell growth but also modulated the A/B ratio during C. beijerinckii butanol fermentation.IMPORTANCE Bioconversion of lignocellulosic feedstocks to butanol involves pretreatment, during which hundreds of soluble lignin compounds (SLCs) form. Most of these SLCs inhibit growth of solvent-producing clostridia. However, the mechanism by which these compounds modulate electron flow in clostridia remains elusive. In this study, the results revealed that SLCs changed redox balance by producing oxidative stress and modulating electron flow as electron donors. Production of H2 and acetone was stimulated, while butanol production remained unchanged, which led to a high A/B ratio during C. beijerinckii fermentation using corn stover-derived hydrolysate as the carbon source. These observations provide insight into utilizing C. beijerinckii to produce butanol from a lignocellulosic biomass.