Superdurable and fire-retardant structural coloration of carbon nanotubes.
Ontology highlight
ABSTRACT:
SUBMITTER: Chen F
PROVIDER: S-EPMC9242455 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this study, two different types of industrial lignin (i.e., lignosulphonate lignin (LL) and kraft lignin (DL)) were exploited as charring agents with phosphorus-based flame retardants for polyamide 11 (PA11). The effect of lignins on the thermal stability and fire behavior of PA11 combined with phosphinate additives (namely, aluminum phosphinate (AlP) and zinc phosphinate (ZnP)) has been studied by thermogravimetric analysis (TGA), UL 94 vertical flame spread, and cone calorimetry tests. Various blends of flame retarded PA11 were prepared by melt process using a twin-screw extruder. Thermogravimetric analyses showed that the LL containing ternary blends are able to provide higher thermal stability, as well as a developed char residue. The decomposition of the phosphinates led to the formation of phosphate compounds in the condensed phase, which promotes the formation of a stable char. Flammability tests showed that LL/ZnP ternary blends were able to achieve self-extinction and V-1 classification; the other formulations showed a strong melt dripping and higher burning. In addition to this, cone calorimetry results showed that the most enhanced behavior was found when 10 wt % of LL and AlP were combined, which strongly reduced PHRR (-74%) and THR (-22%), due to the interaction between LL and AlP, which not only promotes char formation but also confers the stability to char in the condensed phase.
| S-EPMC6401932 | biostudies-literature
Project description:Tannic acid (TA) is a natural phenolic compound abundant in plants. Its characteristics of low combustion and good absorption make it useful in the flame retardant field. On this basis, a new expansive flame retardant system (ACT) composed of ammonium polyphosphate (APP)/TA functional clay (CT) was used to study the synergistic flame retardancy and smoke suppression of natural rubber (NR). Because of their unique flame retardancy and better mechanical properties compared with the traditional expansive flame retardant system (IFR), new flame retardants have attracted much attention in various fields. The results of the cone calorimeter showed that the ACT system can significantly influence the decomposition behavior of NR and form a highly graphitized and phosphorous carbon layer to protect the composite material, thus a synergistic effect is produced on the flame retardancy and smoke suppression performance of the composite material. In addition, within the effective additive quality range of the ACT system, TC can give the NR composite excellent mechanical properties.
| S-EPMC9580520 | biostudies-literature
Project description:Six new rugged, high-temperature tolerant phosphine oxide-containing poly(4,4'-(p-phenylene)-bis(2,6-diphenylpyridinium)) polymers P-1, P-2, P-3, P-4, P-5, and P-6 are synthesized, characterized, and evaluated. Synthesis results in high yield and purity, as confirmed by elemental, proton (1H), and carbon 13 (13C) nuclear magnetic resonance (NMR) spectra analyses. High glass transition temperatures (Tg > 230 °C) and high char yields (>50% at 700 °C) are determined by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. These new ionic polymers exhibit excellent processability, thin-film forming, high-temperature resistance, fire-resistance and retardation, coating, adhesion, mechanical and tensile strength, and n-type (electron transport) properties. The incorporation of phosphine oxide and bis(phenylpyridinium) moieties in the polymer backbones leads to high glass transition temperatures and excellent fire retardant properties, as determined by microcalorimetry measurements. The use of organic counterions allows these ionic polymers to be easily processable from several common organic solvents. A large variety of these polymers can be synthesized by utilizing structural variants of the bispyrylium salt, phosphine oxide containing diamine, and the counterion in a combinatorial fashion. These results make them very attractive for a number of applications, including as coating and structural component materials for automobiles, aircrafts, power and propulsion systems, firefighter garments, printed circuit boards, cabinets and housings for electronic and electrical components, construction materials, mattresses, carpets, upholstery and furniture, and paper-thin coatings for protecting important paper documents.
| S-EPMC6680757 | biostudies-literature
Project description:Many materials and additives perform well as fire retardants and suppressants, but there is an ever-growing list of unfulfilled demands requiring new developments. This work explores the outstanding dispersant and adhesive performances of cellulose to create a new effective fire-retardant: exfoliated and reassembled graphite (ERG). This is a new 2D polyfunctional material formed by drying aqueous dispersions of graphite and cellulose on wood, canvas, and other lignocellulosic materials, thus producing adherent layers that reduce the damage caused by a flame to the substrates. Visual observation, thermal images and surface temperature measurements reveal fast heat transfer away from the flamed spots, suppressing flare formation. Pinewood coated with ERG underwent standard flame resistance tests in an accredited laboratory, reaching the highest possible class for combustible substrates. The fire-retardant performance of ERG derives from its thermal stability in air and from its ability to transfer heat to the environment, by conduction and radiation. This new material may thus lead a new class of flame-retardant coatings based on a hitherto unexplored mechanism for fire retardation and showing several technical advantages: the precursor dispersions are water-based, the raw materials used are commodities, and the production process can be performed on commonly used equipment with minimal waste.
| S-EPMC8348208 | biostudies-literature
Project description:Transparent wood composites (TWs) offer the possibility of unique coloration effects. A colored transparent wood composite (C-TW) with enhanced fire retardancy was impregnated by metal ion solutions, followed by methyl methacrylate (MMA) impregnation and polymerization. Bleached birch wood with a preserved hierarchical structure acted as a host for metal ions. Cobalt, nickel, copper, and iron metal salts were used. The location and distribution of metal ions in C-TW as well as the mechanical performance, optical properties, and fire retardancy were investigated. The C-TW coloration is tunable by controlling the metal ion species and concentration. The metal ions reduced heat release rates and limited the production of smoke during forced combustion tests. The potential for scaled-up production was verified by fabricating samples with a dimension of 180 × 100 × 1 (l × b × h) mm3.
| S-EPMC10739590 | biostudies-literature
Project description:Recently, evidence was presented that certain single-walled carbon nanotubes (SWNTs) possess helical defective traces, exhibiting distinct cleaved lines, yet their mechanical characterization remains a challenge. On the basis of the spiral growth model of SWNTs, here we present atomic details of helical defects and investigate how the tensile behaviors of SWNTs change with their presence using molecular dynamics simulations. SWNTs have exhibited substantially lower tensile strength and strain than theoretical results obtained from a seamless tubular structure, whose physical origin cannot be explained either by any known SWNT defects so far. We find that this long-lasting puzzle could be explained by assuming helical defects in SWNTs, exhibiting excellent agreement with experimental observation. The mechanism of this tensile process is elucidated by analyzing atomic stress distribution and evolution, and the effects of the chirality and diameter of SWNTs on this phenomenon are examined based on linear elastic fracture mechanics. This work contributes significantly to our understanding of the growth mechanism, defect hierarchies, and mechanical properties of SWNTs.
| S-EPMC4740892 | biostudies-literature
Project description:Introducing fire-retardant additives or building blocks into resins is a widely adopted method used for improving the fire retardancy of epoxy composites. However, the increase in viscosity and the presence of insoluble additives accompanied by resin modification remain challenges for resin transfer molding (RTM) processing. We developed a robust approach for fabricating self-extinguishing RTM composites using unmodified and flammable resins. To avoid the effects on resin fluidity and processing, we loaded the flame retardant into tackifiers instead of resins. We found that the halogen-free flame retardant, a microencapsulated red phosphorus (MRP) additive, was enriched on fabric surfaces, which endowed the composites with excellent fire retardancy. The composites showed a 79.2% increase in the limiting oxygen index, a 29.2% reduction in heat release during combustion, and could self-extinguish within two seconds after ignition. Almost no effect on the mechanical properties was observed. This approach is simple, inexpensive, and basically applicable to all resins for fabricating RTM composites. This approach adapts insoluble flame retardants to RTM processing. We envision that this approach could be extended to load other functions (radar absorbing, conductivity, etc.) into RTM composites, broadening the application of RTM processing in the field of advanced functional materials.
| S-EPMC6315867 | biostudies-other
Project description:Ordered self-assemblies of hybrid molecules have potential as protective umbrellas against environmental pollution and corrosion. This article describes the design and fabrication of a new self-cleaning hybrid molecular material containing polyhedral oligomeric silsesquioxane (POSS) and diphenylalanine as hydrophobic and pollution-protective coating. The colorless organic-inorganic hybrid materials, in which the diphenylalanine motif controls the self-assembly, exhibit unique water resistance property and enhance mechanical strength of paper 1.5-fold. The hybrid building blocks self-assemble in antiparallel sheet manner through noncovalent interactions to form a supramolecular layerlike surface with enhanced roughness. The hybrid material is soluble in organic solvents at room temperature that makes it easy to coat on paper, wood, or metal surfaces. The coating is effective against rusting, corrosion, environmental pollution, and bacterial attack. The coating has been used as fire retardant and enhances fire safety. The sustainable molecular material is promising for the packaging industry and metal industry and artifact preservation.
| S-EPMC6044834 | biostudies-literature
Project description:BackgroundThe aim of this work is to investigate the structure and function of enzymes immobilised on nanomaterials. This work will allow better understanding of enzyme-nanomaterial interactions, as well as designing functional protein-nanomaterial conjugates.Methodology/principal findingsMultiwalled carbon nanotubes (MWNTs) were functionalised with amino groups to improve solubility and biocompatibility. The pristine and functionalised forms of MWNTs were characterised with Fourier-transform infrared spectroscopy. Thermogravimetric analysis was done to examine the degree of the functionalisation process. An immobilised biocatalyst was prepared on functionalised nanomaterial by covalent binding. Thermomyces lanuginosus lipase was used as a model enzyme. The structural change of the immobilised and free lipases were characterised with transmission electron Microscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy and Circular dichroism spectroscopy. Biochemical characterisation of immobilised enzyme showed broader pH and thermal optima compared to soluble form. Reusability of the immobilised enzyme for hydrolysis of long chain esters was demonstrated up to ten cycles.Conclusion/significanceLipase immobilised on MWNTs has exhibited significantly improved thermal stability. The exploration of advanced nanomaterial for enzyme immobilisation support using sophisticated techniques makes nanobiocatalyst of potential interest for biosensor applications.
| S-EPMC3772012 | biostudies-literature
Project description:In the present work, we demonstrate different synthesis procedures for filling carbon nanotubes (CNTs) with equimolar binary nanoparticles of the type Fe-Co. The CNTs act as templates for the encapsulation of magnetic nanoparticles and provide a protective shield against oxidation as well as prevent nanoparticle agglomeration. By variation of the reaction parameters, we were able to tailor the sample purity, degree of filling, the composition and size of the filling particles, and therefore, the magnetic properties. The samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), superconducting quantum interference device (SQUID) and thermogravimetric analysis (TGA). The Fe-Co-filled CNTs show significant enhancement in the coercive field as compared to the corresponding bulk material, which make them excellent candidates for several applications such as magnetic storage devices.
| S-EPMC5905243 | biostudies-literature