Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of Tellurium Doping on Environmental Stability and Luminous Performance of CsPbBr₃ Quantum Dots.

ABSTRACT: The effects of elemental tellurium doping and decorating on the photoluminescence quantum yield (PL QY) and the environmental stability of the CsPbBr₃ quantum dots (QDs) have been systematically studied. The PL spectra blue-shifts from 520 to 464 nm gradually with the increase in the amount of Te, and the full width at half-maximum (FWHM) increases from 20 to 62 nm and decreases to 27 nm accordingly. The morphology of the untreated samples has a rectangular shape with distinct boundaries, whereas the Te-doped samples have a semi-core-shell structure with partially coated CsPb₂Br₅ after tellurium doping. Furthermore, the apparent size of the nanocomposites increases to 20 nm, but the crystal size of the core decreases slightly according to the broadened peaks of X-ray diffraction (XRD). Further investigation by X-ray photoelectron spectroscopy shows that the binding energy of Pb-Br increases and Pb-Te bonds are formed in Te-doped samples, which can enhance the stability of QDs from the view of strengthening the chemical bonds and inhibiting the detaching behavior of bromine under moisture. At the nominal content of Pb/Te = 1:0.4, the thermal decomposition temperature of the QDs increases from 300 to 500 °C; the maximum of PL QY increases to 70% for the 1:0.4 sample and the relative PL peak intensity maintains 50% of the initial value after a 60 h aging simulation. Finally, the nanocomposite materials are fabricated into a white light-emitting device (WLED). Under the illumination of a commercial GaN chip, the device shows a good Commission Internationale de lEclairage (CIE) color coordination of (0.3291,0.3318).

SUBMITTER: Liang Z

PROVIDER: S-EPMC9245131 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Solution-Processed CsPbBr3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High-Performance Photodetectors.

Project description:Planar heterojunctions (PHJs) are fundamental building blocks for construction of semiconductor devices. However, fabricating PHJs with solution-processable semiconductors such as organic semiconductors (OSCs) is a challenge. Herein, utilizing the orthogonal solubility and good wettability between CsPbBr3 perovskite quantum dots (PQDs) and OSCs, fabrication of solution-processed PQD/OSC PHJs are reported. The phototransistors based on bilayer PQD/PDVT-10 PHJs show responsivity up to 1.64 × 104 A W-1 , specific detectivity of 3.17 × 1012 Jones, and photosensitivity of 5.33 × 106 when illuminated by 450 nm light. Such high photodetection performance is attributed to efficient charge dissociation and transport, as well as the photogating effect in the PHJs. Furthermore, the tri-layer PDVT-10/PQD/Y6 PHJs are used to construct photodiodes working in self-powered mode, which exhibit broad range photoresponse from ultraviolet to near-infrared, with responsivity approaching 10-1 A W-1 and detectivity over 106 Jones. These results present a convenient and scalable production processes for solution-processed PHJs and show their great potential for optoelectronic applications.

| S-EPMC9036026 | biostudies-literature

Quantifying the Thermodynamics of Ligand Binding to CsPbBr3 Quantum Dots.

Project description:Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, 1 H NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr3 QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr3 QD surface, having individual surface densities of 1.2-1.7 nm-2 . 10-Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (Keq =1.97) at 25 °C while 10-undecenylphosphonic acid undergoes irreversible ligand exchange. Undec-10-en-1-amine exergonically exchanges with oleylamine (Keq =2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr3 QDs without etching of the nanocrystal surface; increases in the steady-state PL intensities correlate with more strongly bound conjugate base ligands.

| S-EPMC6467082 | biostudies-literature

Green Light-Emitting Devices Based on Perovskite CsPbBr3 Quantum Dots.

Project description:In this paper, high quality green-emitting CsPbBr3 quantum dots (QDs) are successfully synthesized by hot-injection method. Different injection temperatures are tested to optimize the synthesis conditions. High brightness with the photoluminescence (PL) quantum yields (QYs) up to 90% and narrow size-distribution with the full width at half-maximum (FWHM) of 18.5 nm are obtained under the optimized conditions. Green light emitting diodes (LEDs) based on the CsPbBr3 QDs are successfully demonstrated by combining solution method with vapor deposition method. Composite films of poly[9,9-dioctylfluorene-co- N-[4-(3-methylpropyl)]-diphenylamine] (TFB) and bathocuproine (BCP) layers are chosen as the hole-transporting and the electron-transporting layers, respectively. The highly bright green QD-based light-emitting devices (QLEDs) showing maximum luminance up to 46,000 cd/m2 with a low turn on voltage of 2.3 V, and peak external quantum efficiency (EQE) of 5.7%, corresponding to 19.9 cd/A in luminance efficiency. These devices also show high color purity for electroluminescence (EL) with FWHM <20 nm, and no redshift and broadening with increasing voltage as well as a spectral match between PL and EL.

| S-EPMC6151352 | biostudies-literature

Strongly Confined CsPbBr3 Quantum Dots as Quantum Emitters and Building Blocks for Rhombic Superlattices.

Project description:The success of the colloidal semiconductor quantum dots (QDs) field is rooted in the precise synthetic control of QD size, shape, and composition, enabling electronically well-defined functional nanomaterials that foster fundamental science and motivate diverse fields of applications. While the exploitation of the strong confinement regime has been driving commercial and scientific interest in InP or CdSe QDs, such a regime has still not been thoroughly explored and exploited for lead-halide perovskite QDs, mainly due to a so far insufficient chemical stability and size monodispersity of perovskite QDs smaller than about 7 nm. Here, we demonstrate chemically stable strongly confined 5 nm CsPbBr3 colloidal QDs via a postsynthetic treatment employing didodecyldimethylammonium bromide ligands. The achieved high size monodispersity (7.5% ± 2.0%) and shape-uniformity enables the self-assembly of QD superlattices with exceptional long-range order, uniform thickness, an unusual rhombic packing with an obtuse angle of 104°, and narrow-band cyan emission. The enhanced chemical stability indicates the promise of strongly confined perovskite QDs for solution-processed single-photon sources, with single QDs showcasing a high single-photon purity of 73% and minimal blinking (78% "on" fraction), both at room temperature.

| S-EPMC9933619 | biostudies-literature

Anisotropic electronic coupling in three-dimensional assembly of CsPbBr3 quantum dots.

Project description:Cesium lead halide (CsPbX3, X = Cl, Br, or I) perovskite quantum dots (PeQDs) show promise for next-generation optoelectronics. In this study, we controlled the electronic coupling between PeQD multilayers using a layer-by-layer method and dithiol linkers of varying structures. The energy shift of the first excitonic peak from monolayer to bilayer decreases exponentially with increasing interlayer spacer distance, indicating the resonant tunnelling effect. X-ray diffraction measurements revealed anisotropic inter-PeQD distances in multiple layers. Photoluminescence (PL) analysis showed lower energy emission in the in-plane direction due to the electronic coupling in the out-of-plane direction, supporting the anisotropic electronic state in the PeQD multilayers. Temperature-dependent PL and PL lifetimes indicated changes in exciton behaviour due to the delocalized electronic state in PeQD multilayers. Particularly, the electron-phonon coupling strength increased, and the exciton recombination rate decreased. This is the first study demonstrating controlled electronic coupling in a three-dimensional ordered structure, emphasizing the importance of the anisotropic electronic state for high-performance PeQDs devices.

| S-EPMC11323341 | biostudies-literature

Ultra-narrow room-temperature emission from single CsPbBr3 perovskite quantum dots.

Project description:Semiconductor quantum dots have long been considered artificial atoms, but despite the overarching analogies in the strong energy-level quantization and the single-photon emission capability, their emission spectrum is far broader than typical atomic emission lines. Here, by using ab-initio molecular dynamics for simulating exciton-surface-phonon interactions in structurally dynamic CsPbBr3 quantum dots, followed by single quantum dot optical spectroscopy, we demonstrate that emission line-broadening in these quantum dots is primarily governed by the coupling of excitons to low-energy surface phonons. Mild adjustments of the surface chemical composition allow for attaining much smaller emission linewidths of 35-65 meV (vs. initial values of 70-120 meV), which are on par with the best values known for structurally rigid, colloidal II-VI quantum dots (20-60 meV). Ultra-narrow emission at room-temperature is desired for conventional light-emitting devices and paramount for emerging quantum light sources.

| S-EPMC9095639 | biostudies-literature

Intermittency of CsPbBr3 Perovskite Quantum Dots Analyzed by an Unbiased Statistical Analysis.

Project description:We analyze intermittency in intensity and fluorescence lifetime of CsPbBr3 perovskite quantum dots by applying unbiased Bayesian inference analysis methods. We apply change-point analysis (CPA) and a Bayesian state clustering algorithm to determine the timing of switching events and the number of states between which switching occurs in a statistically unbiased manner, which we have benchmarked particularly to apply to highly multistate emitters. We conclude that perovskite quantum dots display a plethora of gray states in which brightness, broadly speaking, correlates inversely with decay rate, confirming the multiple recombination centers model. We leverage the CPA partitioning analysis to examine aging and memory effects. We find that dots tend to return to the bright state before jumping to a dim state and that when choosing a dim state, they tend to explore the entire set of states available.

| S-EPMC8282187 | biostudies-literature

Enhancement of Photoluminescence Quantum Yield and Stability in CsPbBr3 Perovskite Quantum Dots by Trivalent Doping.

Project description:We determine the influence of substitutional defects on perovskite quantum dots through experimental and theoretical investigations. Substitutional defects were introduced by trivalent dopants (In, Sb, and Bi) in CsPbBr3 by ligand-assisted reprecipitation. We show that the photoluminescence (PL) emission peak shifts toward shorter wavelengths when doping concentrations are increased. Trivalent metal-doped CsPbBr3 enhanced the PL quantum yield (~10%) and air stability (over 10 days). Our findings provide new insights into the influence of substitutional defects on substituted CsPbBr3 that underpin their physical properties.

| S-EPMC7221998 | biostudies-literature

CsPbBr3/CdS Core/Shell Structure Quantum Dots for Inverted Light-Emitting Diodes Application.

Project description:Novel CsPbBr3/CdS core/shell structure quantum dots (QDs) were successfully synthesized using a facile hot-injection method. The corresponding CsPbBr3/CdS QDs based light-emitting diodes (QLEDs) were further prepared, which demonstrated the maximum luminance of 354 cd/m2 and an external quantum efficiency (EQE) of 0.4% with the current efficiency (CE) of 0.3 cd/A. Moreover, the optoelectronic performance of the CsPbBr3/CdS QDs based QLEDs exhibited a comparable enhancement in contrast to the pure CsPbBr3 QDs based QLEDs. Hypothetically, the novel CsPbBr3/CdS structure QDs introduced one new route for advanced light emission applications of perovskite materials.

| S-EPMC6640208 | biostudies-literature

Observation of transition from superfluorescence to polariton condensation in CsPbBr3 quantum dots film.

Project description:The superfluorescence effect has received extensive attention due to the many-body physics of quantum correlation in dipole gas and the optical applications of ultrafast bright radiation field based on the cooperative quantum state. Here, we demonstrate not only to observe the superfluorescence effect but also to control the cooperative state of the excitons ensemble by externally applying a regulatory dimension of coupling light fields. A new quasi-particle called cooperative exciton-polariton is revealed in a light-matter hybrid structure of a perovskite quantum dot thin film spin-coated on a Distributed Bragg Reflector. Above the nonlinear threshold, polaritonic condensation occurs at a nonzero momentum state on the lower polariton branch owning to the vital role of the synchronized excitons. The phase transition from superfluorescence to polariton condensation exhibits typical signatures of a decrease of the linewidth, an increase of the macroscopic coherence as well as an accelerated radiation decay rate. These findings are promising for opening new potential applications for super-brightness and unconventional coherent light sources and could enable the exploitation of cooperative effects for quantum optics.

| S-EPMC10828401 | biostudies-literature