Experimental study of cavitating flow around a NACA 0012 hydrofoil in a slit channel.
Ontology highlight
ABSTRACT:
SUBMITTER: Skripkin SG
PROVIDER: S-EPMC9249870 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The phoretic mechanisms at stake in the propulsion of asymmetric colloids have been the subject of debates during the past years. In particular, the importance of electrokinetic effects on the motility of Pt-PS Janus sphere was recently discussed. Here, we probe the hydrodynamic flow field around a catalytically active colloid using particle tracking velocimetry both in the freely swimming state and when kept stationary with an external force. Our measurements provide information about the fluid velocity in the vicinity of the surface of the colloid, and confirm a mechanism for propulsion that was proposed recently. In addition to offering a unified understanding of the nonequilibrium interfacial transport processes at stake, our results open the way to a thorough description of the hydrodynamic interactions between such active particles and understanding their collective dynamics.
| S-EPMC6718378 | biostudies-literature
Project description:In order to assess the predictive capability of the S-MDCPP model, which may describe the viscoelastic behavior of the low-density polyethylene melts, a planar contraction flow benchmark problem is calculated in this investigation. A pressure-stabilized iterative fractional step algorithm based on the finite increment calculus (FIC) method is adopted to overcome oscillations of the pressure field due to the incompressibility of fluids. The discrete elastic viscous stress splitting (DEVSS) technique in combination with the streamline upwind Petrov-Galerkin (SUPG) method are employed to calculate the viscoelastic flow. The equal low-order finite elements interpolation approximations for velocity-pressure-stress variables can be applied to calculate the viscoelastic contraction flows for LDPE melts. The predicted velocities agree well with the experimental results of particle imagine velocity (PIV) method, and the pattern of principal stress difference calculated by the S-MDCPP model has good agreement with the results measured by the flow induced birefringence (FIB) device. Numerical and experimental results show that the S-MDCPP model is capable of accurately capturing the rheological behaviors of branched polymers in complex flow.
| S-EPMC8201106 | biostudies-literature
Project description:This work investigates the effect of liquid fuel viscosity, as specific by the European Committee for Standardization 2009 (European Norm) for all automotive fuels, on the predicted cavitating flow in micro-orifice flows. The wide range of viscosities allowed leads to a significant variation in orifice nominal Reynolds numbers for the same pressure drop across the orifice. This in turn, is found to affect flow detachment and the formation of large-scale vortices and microscale turbulence. A pressure-based compressible solver is used on the filtered Navier-Stokes equations using the multifluid approach; separate velocity fields are solved for each phase, which share a common pressure. The rates of evaporation and condensation are evaluated with a simplified model based on the Rayleigh-Plesset equation; the coherent structure model is adopted for the subgrid scale modeling in the momentum conservation equation. The test case simulated is a well-reported benchmark throttled flow channel geometry, referred to as "I-channel"; this has allowed for easy optical access for which flow visualization and laser-induced fluorescence measurements allowed for validation of the developed methodology. Despite its simplicity, the I-channel geometry is found to reproduce the most characteristic flow features prevailing in high-speed flows realized in cavitating fuel injectors. Subsequently, the effect of liquid viscosity on integral mass flow, velocity profiles, vapor cavity distribution, and pressure peaks indicating locations prone to cavitation erosion is reported.
| S-EPMC7143437 | biostudies-literature
Project description:The steady streaming (SS) phenomenon is gaining increased attention in the microfluidics community, because it can generate net mass flow from zero-mean vibration. We developed numerical simulation and experimental measurement tools to analyze this vibration-induced flow, which has been challenging due to its unsteady nature. The validity of these analysis methods is confirmed by comparing the three-dimensional (3D) flow field and the resulting particle trajectories induced around a cylindrical micro-pillar under circular vibration. In the numerical modeling, we directly solved the flow in the Lagrangian frame so that the substrate with a micro-pillar becomes stationary, and the results were converted to a stationary Eulerian frame to compare with the experimental results. The present approach enables us to avoid the introduction of a moving boundary or infinitesimal perturbation approximation. The flow field obtained by the micron-resolution particle image velocimetry (micro-PIV) measurement supported the three-dimensionality observed in the numerical results, which could be important for controlling the mass transport and manipulating particulate objects in microfluidic systems.
| S-EPMC6316184 | biostudies-literature
Project description:A geotextile mattress with sloping curtain is a newly proposed countermeasure against river and estuarine scour. In previous laboratory experiments, a geotextile mattress with sloping curtain was capable of protecting the bed downstream from scour and stimulating sediment deposition on both sides. However, the seepage scour under its geotextile mattress is inadequately researched at present. In this study, the Geotextile Mattress with Sloping Plate (GMSP) is proposed based on the simplification of the geotextile mattress with sloping curtain with the construction feasibility considered. A series of experiments was conducted to investigate the pressure distribution around the GMSP and the averaged seepage hydraulic gradient beneath its mattress. The results indicate remarkable pressure difference on two sides of the GMSP. The minimum bed pressure appears about 1.3 times the plate height downstream to the GMSP. The averaged seepage hydraulic gradient beneath the mattress increases with the sloping angle increasing from 35° to 60° in general. The averaged hydraulic gradient also ascends as the relative plate height increases, but reduces as the opening ratio increases at opening ratios greater than 0.143. The safety boundary for the averaged hydraulic gradient under the geotextile mattress of the GMSP could get much smaller than the critical hydraulic gradient of piping and can easily be overwhelmed. This phenomenon can mainly be attributed to the discontinuous contact between the mattress and the seabed. A suggestion for the parametric design of the GMSP is to extend the width of the mattress to reduce the risk of seepage failure.
| S-EPMC6347254 | biostudies-literature
Project description:The Humpback whale tubercles have been studied for more than a decade. Tubercle Leading Edge (TLE) effectively reduces the separation bubble size and helps in delaying stall. They are very effective in case of low Reynolds number flows. The current Computational Fluid Dynamics (CFD) study is on NACA 4415 airfoil, at a Reynolds number 120,000. Two TLE shapes are tested on NACA 4415 airfoil. The tubercle designs implemented on the airfoil are sinusoidal and spherical. A parametric study is also carried out considering three amplitudes (0.025c, 0.05c and 0.075c), the wavelength (0.25c) is fixed. Structured mesh is utilized to generate grid and Transition SST turbulence model is used to capture the flow physics. Results clearly show spherical tubercles outperform sinusoidal tubercles. Furthermore experimental study considering spherical TLE is carried out at Reynolds number 200,000. The experimental results show that spherical TLE improve performance compared to clean airfoil.
| S-EPMC5574603 | biostudies-literature
Project description:A basic conservation of cell migration guidance mechanisms in the nervous and immune systems was proposed when Slit, known for its role in axon guidance, was found to inhibit chemokine-induced leukocyte chemotaxis in vitro. These studies examined the role of Slit2 in modulating inflammation in vivo. In a rat model of glomerulonephritis, endogenous glomerular Slit2 expression fell after disease induction, and its inhibition during the early disease period accelerated inflammation. Ex vivo glomerular leukocytes showed decreased chemokine and chemoattractant-induced chemotaxis in response to Slit2, suggesting an anti-inflammatory role for glomerular Slit2. In contrast to the effect of inhibition, glomerulonephritis was ameliorated by systemic Slit2 administration. Slit2 treatment improved disease histologically and also improved renal function when given early in the disease course. Leukocytes harvested from rats receiving Slit2 showed decreased monocyte chemoattractant protein-1 (MCP)-1-mediated migration, consistent with a peripheral Slit2 effect. In keeping with this functional alteration, Slit2-mediated inhibition of RAW264.7 cell chemotaxis was associated with decreased levels of active cdc42 and Rac1, implicating GTPases in leukocyte Slit2 signaling. These findings suggest a role for endogenous Slit2 in the inhibition of chemoattractant-mediated signals, demonstrate a potentially important anti-inflammatory effect for Slit2 in vivo, and provide further evidence for conserved mechanisms guiding the process of migration in distinct cell types.
| S-EPMC1618548 | biostudies-literature
Project description:Cavitating and bubbly flows involve a host of physical phenomena and processes ranging from nucleation, surface and interfacial effects, mass transfer via diffusion and phase change to macroscopic flow physics involving bubble dynamics, turbulent flow interactions and two-phase compressible effects. The complex physics that result from these phenomena and their interactions make for flows that are difficult to investigate and analyse. From an experimental perspective, evolving sensing technology and data processing provide opportunities for gaining new insight and understanding of these complex flows, and the continuous wavelet transform (CWT) is a powerful tool to aid in their elucidation. Five case studies are presented involving many of these phenomena in which the CWT was key to data analysis and interpretation. A diverse set of experiments are presented involving a range of physical and temporal scales and experimental techniques. Bubble turbulent break-up is investigated using hydroacoustics, bubble dynamics and high-speed imaging; microbubbles are sized using light scattering and ultrasonic sensing, and large-scale coherent shedding driven by various mechanisms are analysed using simultaneous high-speed imaging and physical measurement techniques. The experimental set-up, aspect of cavitation being addressed, how the wavelets were applied, their advantages over other techniques and key findings are presented for each case study.This paper is part of the theme issue 'Redundancy rules: the continuous wavelet transform comes of age'.
| S-EPMC6048584 | biostudies-literature
Project description:The title compound, NaCa(AsO(4)), was synthesized using a hydro-thermal method at 633-643?K. It has a dense structure composed of alternating layers of distorted [CaO(6)] octa-hedra and layers of [AsO(4)] tetra-hedra and distorted [NaO(6)] octa-hedra, stacked along the a axis. The As, Ca and two O atoms lie on the mirror plane at y = 1/4 (i.e. 4c), while the Na atom lies on an inversion centre (1/2, 1/2, 0) (i.e. 4b). Each distorted [CaO(6)] octa-hedron shares four equatorial common O vertices with four neighboring octa-hedra, forming a layer parallel to (100), whereas each distorted [NaO(6)] octa-hedron shares two opposite edges with two neighboring ones, forming a chain running along [010]. Each isolated [AsO(4)] tetra-hedron shares two edges with two different [NaO(6)] octa-hedra in one [NaO(6)] chain and a vertex with another chain. Simultaneously the above [AsO(4)] tetra-hedron located in a four-membered [CaO(6)] ring shares one edge of its base facet with one [CaO(6)] octa-hedron and three corners with three other [CaO(6)] octa-hedra of one [CaO(6)] layer, and the remaining apex is shared with another [CaO(6)] layer. [NaO(6)] octa-hedra and [CaO(6)] octa-hedra are linked to each other by sharing edges and vertices.
| S-EPMC3238576 | biostudies-literature
Project description:Time course study that monitored clinical observation data, cytokines from gingival crevicular fluid, and microbial composition from sub-gingival dental plaque.
| PRJEB37444 | ENA