Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Scalable self-assembly interfacial engineering for high-temperature dielectric energy storage.

ABSTRACT: Flexible polymer dielectrics which can function well at elevated temperatures continue to be significant in harsh condition energy storage. However, state-of-the-art high-temperature polymers traditionally designed with conjugated structures for better thermal stability have compromised bandgaps and charge injection barriers. Here, we demonstrate a self-assembled polyvinyl alcohol (PVA)/montmorillonite (MMT) coating to impede charge carriers injecting into the polyimide (PI) polymer film. The anisotropic conductivity of the 2D nanolayered coating further dissipates the energy of charges through tortuous injection pathways. With the coating, high field pre-breakdown conduction measurement and space-charge profiling of PI films reveal a clear shifting of the dominant mode of conduction from the bulk-limited hopping to Schottky-injection limited conduction. The coating thus imparts PI films with a significantly suppressed electrical conduction (∼10×), and substantially improved discharge efficiency (7×) and energy density (2.7×) at 150°C. The facile and scalable flow-induced fabrication unleash enormous applications for harsh condition electrification.

SUBMITTER: Wu C

PROVIDER: S-EPMC9250013 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Polymer/molecular semiconductor all-organic composites for high-temperature dielectric energy storage.

Project description:Dielectric polymers for electrostatic energy storage suffer from low energy density and poor efficiency at elevated temperatures, which constrains their use in the harsh-environment electronic devices, circuits, and systems. Although incorporating insulating, inorganic nanostructures into dielectric polymers promotes the temperature capability, scalable fabrication of high-quality nanocomposite films remains a formidable challenge. Here, we report an all-organic composite comprising dielectric polymers blended with high-electron-affinity molecular semiconductors that exhibits concurrent high energy density (3.0 J cm-3) and high discharge efficiency (90%) up to 200 °C, far outperforming the existing dielectric polymers and polymer nanocomposites. We demonstrate that molecular semiconductors immobilize free electrons via strong electrostatic attraction and impede electric charge injection and transport in dielectric polymers, which leads to the substantial performance improvements. The all-organic composites can be fabricated into large-area and high-quality films with uniform dielectric and capacitive performance, which is crucially important for their successful commercialization and practical application in high-temperature electronics and energy storage devices.

| S-EPMC7411043 | biostudies-literature

Ambient Temperature Affects Protein Self-Assembly by Interfering with the Interfacial Aggregation Behavior.

Project description:Amyloid fibrillation is known to be associated with degenerative diseases, and mature fibrils are also considered as valuable biomedical materials. Thus, the mechanism and influencing factors of fibrillation have always been the focus of research. However, in vitro studies are always plagued by low reproducibility of kinetics and the molecular mechanism of amyloid fibrillation is under debate until now. Here, we identified the ambient temperature (AT) as a non-negligible interfering factor in in vitro self-assembly of globular protein hen egg-white lysozyme for the first time. By multimodal molecular spectroscopy methods, not only the effect of ATs on the kinetics of protein aggregation was described but also the conformational changes of the molecular structure with different ATs were captured. Through investigating the dependence of interfacial area and catalysis, the reason for this influence was construed by the various aggregation behaviors of protein molecules in the two-phase interface. The results suggest that in vitro mechanism research on protein fibrillation needs to first clarify the AT for a more accurate comparative analysis. The proposal of this concept will provide a new clue for a deeper understanding of the mechanism of protein self-assembly and may have an impact on evaluating the efficiency of amyloid accelerators or inhibitors based on the comparative analysis of protein self-assembly.

| S-EPMC10357426 | biostudies-literature

AI-assisted discovery of high-temperature dielectrics for energy storage.

Project description:Electrostatic capacitors play a crucial role as energy storage devices in modern electrical systems. Energy density, the figure of merit for electrostatic capacitors, is primarily determined by the choice of dielectric material. Most industry-grade polymer dielectrics are flexible polyolefins or rigid aromatics, possessing high energy density or high thermal stability, but not both. Here, we employ artificial intelligence (AI), established polymer chemistry, and molecular engineering to discover a suite of dielectrics in the polynorbornene and polyimide families. Many of the discovered dielectrics exhibit high thermal stability and high energy density over a broad temperature range. One such dielectric displays an energy density of 8.3 J cc-1 at 200 °C, a value 11 × that of any commercially available polymer dielectric at this temperature. We also evaluate pathways to further enhance the polynorbornene and polyimide families, enabling these capacitors to perform well in demanding applications (e.g., aerospace) while being environmentally sustainable. These findings expand the potential applications of electrostatic capacitors within the 85-200 °C temperature range, at which there is presently no good commercial solution. More broadly, this research demonstrates the impact of AI on chemical structure generation and property prediction, highlighting the potential for materials design advancement beyond electrostatic capacitors.

| S-EPMC11271506 | biostudies-literature

Annealing and Stretching Induced High Energy Storage Properties in All-Organic Composite Dielectric Films.

Project description:High discharged energy density and charge⁻discharge efficiency, in combination with high electric breakdown strength, maximum electric displacement and low residual displacement, are very difficult to simultaneously achieve in single-component polymer dielectrics. Plenty of researches have reported polymer based composite dielectrics filled with inorganic fillers, through complex surface modification of inorganic fillers to improve interface compatibility. In this work, a novel strategy of introducing environmentally-friendly biological polyester into fluoropolymer matrix has been presented to prepare all-organic polymer composites with desirable high energy storage properties by solution cast process (followed by annealing or stretching post-treatment), in order to simplify the preparation steps and lower the cost. Fluoropolymer with substantial ferroelectric domains (contributing to high dielectric response) as matrix and poly (3-hydroxybutyrate-co-3-hydroxyvalerate) with excellent linear polarization property (resulting in high breakdown strength) as filler were employed. By high-temperature annealing, the size of ferroelectric domains could be improved and interfacial air defects could be removed, leading to elevated high energy storage density and efficiency in composite. By mono-directional stretching, the ferroelectric domains and polyester could be regularly oriented along stretching direction, resulting in desired high energy storage performances as well. Besides, linear dielectric components could contribute to high efficiency from their strong rigidity restrain effect on ferroelectric component. This work might open up the way for a facile fabrication of promising all-organic composite dielectric films with high energy storage properties.

| S-EPMC6266785 | biostudies-literature

Flexible Lead-Free Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 Dielectric Film Capacitor with High Energy Storage Performance.

Project description:Ferroelectric thin film capacitors have triggered great interest in pulsed power systems because of their high-power density and ultrafast charge-discharge speed, but less attention has been paid to the realization of flexible capacitors for wearable electronics and power systems. In this work, a flexible Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 thin film capacitor is synthesized on mica substrate. It possesses an energy storage density of Wrec ~ 62 J cm-3, combined with an efficiency of η ~ 74% due to the moderate breakdown strength (3000 kV cm-1) and the strong relaxor behavior. The energy storage performances for the film capacitor are also very stable over a broad temperature range (-50-200 °C) and frequency range (500 Hz-20 kHz). Moreover, the Wrec and η are stabilized after 108 fatigue cycles. Additionally, the superior energy storage capability can be well maintained under a small bending radius (r = 2 mm), or after 104 mechanical bending cycles. These results reveal that the Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 film capacitors in this work have great potential for use in flexible microenergy storage systems.

| S-EPMC8622521 | biostudies-literature

BaTiO<sub>3</sub>/MWNTs/Polyvinylidene Fluoride Ternary Dielectric Composites with Excellent Dielectric Property, High Breakdown Strength, and High-Energy Storage Density.

Project description:To improve the dielectric performance of polyvinylidene fluoride (PVDF), BaTiO3/MWNTs/PVDF ternary composites were prepared by the solution casting method. The percolation threshold (fraction of MWNTs) has dropped greatly below 0.4 vol %, with the enhancement of dielectric constant and breakdown field. For the BaTiO3/MWNTs/PVDF (11.5/0.35/88.15) composite, the dielectric constant is 59, the loss is below 0.055, and the maximum operating electric field is 324 MV/m, so the discharged energy density can be of up to 10.3 J/cm3 with the efficiency of above 77.2%. The reason of improvement was revealed by the scanning electron microscope images and the X-ray diffraction data. It is found that uniform distribution of filler in the composites and the increase of the β phase of polymers result in the enhancement of polarization and improvement of dielectric constant of PVDF. The third-phase spherical inorganic particles prevent the formation of conductive networks and improve the uniformity of local electric field, so the breakdown strength of composites can be enhanced greatly. Here, this paper provides a method to get the composites with high energy storage density for supercapacitors.

| S-EPMC6648649 | biostudies-literature

Interfacial Engineered Vanadium Oxide Nanoheterostructures Synchronizing High-Energy and Long-Term Potassium-Ion Storage.

Project description:Potassium ion hybrid capacitors (KICs) have drawn tremendous attention for large-scale energy storage applications because of their high energy and power densities and the abundance of potassium sources. However, achieving KICs with high capacity and long lifespan remains challenging because the large size of potassium ions causes sluggish kinetics and fast structural pulverization of electrodes. Here, we report a composite anode of VO2-V2O5 nanoheterostructures captured by a 3D N-doped carbon network (VO2-V2O5/NC) that exhibits a reversible capacity of 252 mAh g-1 at 1 A g-1 over 1600 cycles and a rate performance with 108 mAh g-1 at 10 A g-1. Quantitative kinetics analyses demonstrate that such great rate capability and cyclability are enabled by the capacitive-dominated potassium storage mechanism in the interfacial engineered VO2-V2O5 nanoheterostructures. The further fabricated full KIC cell consisting of a VO2-V2O5/NC anode and an active carbon cathode delivers a high operating voltage window of 4.0 V and energy and power densities up to 154 Wh kg-1 and 10 000 W kg-1, respectively, surpassing most state-of-the-art KICs.

| S-EPMC8793133 | biostudies-literature

Strain engineering induced interfacial self-assembly and intrinsic exchange bias in a manganite perovskite film.

Project description:The control of complex oxide heterostructures at atomic level generates a rich spectrum of exotic properties and unexpected states at the interface between two separately prepared materials. The frustration of magnetization and conductivity of manganite perovskite at surface/interface which is inimical to their device applications, could also flourish in tailored functionalities in return. Here we prove that the exchange bias (EB) effect can unexpectedly emerge in a (La,Sr)MnO3 (LSMO) "single" film when large compressive stress imposed through a lattice mismatched substrate. The intrinsic EB behavior is directly demonstrated to be originating from the exchange coupling between ferromagnetic LSMO and an unprecedented LaSrMnO4-based spin glass, formed under a large interfacial strain and subsequent self-assembly. The present results not only provide a strategy for producing a new class of delicately functional interface by strain engineering, but also shed promising light on fabricating the EB part of spintronic devices in a single step.

| S-EPMC3756339 | biostudies-literature

Tailoring the Electrical Energy Storage Capability of Dielectric Polymer Nanocomposites via Engineering of the Host-Guest Interface by Phosphonic Acids.

Project description:Polymer nanocomposites have attracted broad attention in the area of dielectric and energy storage. However, the electrical and chemical performance mismatch between inorganic nanoparticles and polymer leads to interfacial incompatibility. In this study, phosphonic acid molecules with different functional ligands were introduced to the surface of BaTiO3 (BT) nanoparticles to tune their surface properties and tailor the host-guest interaction between BT and poly(vinylideneflyoride-co-hexafluroro propylene) (P(VDF-HFP)). The dielectric properties and electrical energy storage capability of the nanocomposites were recorded by broadband dielectric spectroscopy and electric displacement measurements, respectively. The influence of the ligand length and polarity on the dielectric properties and electrical energy storage of the nanocomposites was documented. The nanocomposite with 5 vol% 2,3,4,5,6-pentafluorobenzyl phosphonic acid (PFBPA)-modified BT had the highest energy density of 12.8 J cm-3 at 400 MV m-1, i.e., a 187% enhancement in the electrical energy storage capability over the pure P(VDF-HFP). This enhancement can be attributed to the strong electron-withdrawing effect of the pentafluorobenzyl group of PFBPA, which changed the electronic nature of the polymer-particle interface. On the other hand, PFBPA improves the compatibility of the host-guest interface in the nanocomposites and decreases the electrical mismatch of the interface. These results provide new insights into the design and preparation of high-performance dielectric nanocomposites.

| S-EPMC9654262 | biostudies-literature

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage.

Project description:Supercapacitors now play an important role in the progress of hybrid and electric vehicles, consumer electronics, and military and space applications. There is a growing demand in developing hybrid supercapacitor systems to overcome the energy density limitations of the current generation of carbon-based supercapacitors. Here, we demonstrate 3D high-performance hybrid supercapacitors and microsupercapacitors based on graphene and MnO2 by rationally designing the electrode microstructure and combining active materials with electrolytes that operate at high voltages. This results in hybrid electrodes with ultrahigh volumetric capacitance of over 1,100 F/cm(3). This corresponds to a specific capacitance of the constituent MnO2 of 1,145 F/g, which is close to the theoretical value of 1,380 F/g. The energy density of the full device varies between 22 and 42 Wh/l depending on the device configuration, which is superior to those of commercially available double-layer supercapacitors, pseudocapacitors, lithium-ion capacitors, and hybrid supercapacitors tested under the same conditions and is comparable to that of lead acid batteries. These hybrid supercapacitors use aqueous electrolytes and are assembled in air without the need for expensive "dry rooms" required for building today's supercapacitors. Furthermore, we demonstrate a simple technique for the fabrication of supercapacitor arrays for high-voltage applications. These arrays can be integrated with solar cells for efficient energy harvesting and storage systems.

| S-EPMC4394298 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data