Dataset Information

AuNPs@MIL-101 (Cr) as a SERS-Active Substrate for Sensitive Detection of VOCs.

ABSTRACT: Surface-enhanced Raman scattering (SERS) is an important and powerful analytical technique in chemical and biochemical analyses. Metal-organic frameworks (MOFs) can effectively capture volatile organic compounds (VOCs) with high adsorption capacity and fast kinetics, and the local surface plasmon resonance characteristics of gold nanoparticles can quickly and effectively distinguish different VOCs by SERS. Combining both, we designed a novel SERS substrate based on embedding gold nanoparticles (AuNPs) within MIL-101(Cr) for the recognition of various VOCs in the gaseous phase. Occupying of AuNPs inside MIL-101(Cr) increased the micropore-specific surface area of AuNPs@MIL-101(Cr), which enabled AuNPs@MIL-101(Cr) to absorb more toluene molecules and consequently realized its high detection sensitivity. The detection limits for toluene, 4-ethylbenzaldehyde, and formaldehyde were down to 6, 5, and 75, ppm respectively. Moreover, this substrate could be used for detecting different VOCs simultaneously. Finally, we discussed the enhancement of AuNPs outside and inside MIL-101(Cr) on the Raman signal.

SUBMITTER: Xie D

PROVIDER: S-EPMC9256292 | biostudies-literature | 2022

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

AuNPs@MIL-101 (Cr) as a SERS-Active Substrate for Sensitive Detection of VOCs.

Xie Dan D Wang Ruimeng R Fu Jinghao J Zhao Zhongxing Z Li Min M

Frontiers in bioengineering and biotechnology 20220620

Surface-enhanced Raman scattering (SERS) is an important and powerful analytical technique in chemical and biochemical analyses. Metal-organic frameworks (MOFs) can effectively capture volatile organic compounds (VOCs) with high adsorption capacity and fast kinetics, and the local surface plasmon resonance characteristics of gold nanoparticles can quickly and effectively distinguish different VOCs by SERS. Combining both, we designed a novel SERS substrate based on embedding gold nanoparticles ( ...[more]

PMID: 35800331

Similar Datasets

Project description:In this study, hybrids of nanoporous MIL-101(Cr) and MIL-53(Al) were synthesized using a hydrothermal method for various time periods, ranging from 8 to 40 h. The prepared materials were characterized by powder X-ray diffraction (PXRD) and elemental analysis, and their specific surface areas were measured by N2 sorption at 77 K using the Brunauer-Emmett-Teller (BET) method. To investigate the practical application of these materials, the pure carbon dioxide and methane adsorption capacities of the samples were determined using the volumetric method. The Langmuir model was used to fit the CO2 and CH4 isotherms. Extended Langmuir (EL) equations and the ideal adsorbed solution theory (IAST) models were used to obtain the CO2/CH4 selectivity. The sample with the highest BET specific surface area was selected as a candidate for further investigations. The thermal stability of the selected sample was investigated by thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) was used to characterize the sample morphology. XRD results showed that the sample synthesized over the shortest time corresponded to MIL-101(Cr), while the sample synthesized over the longest time was in agreement with MIL-53(Al). Samples synthesized for time periods between these two limits were assumed to be composites of both MIL-53(Al) and MIL-101(Cr). TGA results indicated that the hybrid materials were thermally stable at temperatures about 100 °C higher than for pure MIL-101(Cr). The BET specific surface area (1746 m2 g-1) and CO2 adsorption capacity (16 mmol g-1) of the selected hybrid sample were about 50% and 35% higher, respectively, compared with those of pure MIL-53(Al), but 30% and 20% lower, respectively, compared with those of pure MIL-101(Cr). Binary adsorption modeling showed the high selectivity of the MIL-101(Cr) and MIL-53(Al) hybrid material for CO2 with a minimum separation factor of about 60 at 298 K. This value was much higher than those reported previously and those observed in this work for the original MIL-101(Cr) or MIL-53(Al). These results demonstrated that the hybrid of MIL-101(Cr) and MIL-53(Al) was a promising material for selective CO2 capture from natural and biogas.

Dataset Information

AuNPs@MIL-101 (Cr) as a SERS-Active Substrate for Sensitive Detection of VOCs.

Publications

AuNPs@MIL-101 (Cr) as a SERS-Active Substrate for Sensitive Detection of VOCs.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets