Preparation of photonic molecular trains via soft-crystal polymerization of lanthanide complexes.
Ontology highlight
ABSTRACT:
SUBMITTER: Ferreira da Rosa PP
PROVIDER: S-EPMC9256636 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Pincer-type [Cnaphthyl, Npyridine, Namido]HfMe2 complex is a flagship among the post-metallocene catalysts. In this work, various pincer-type Hf-complexes were prepared for olefin polymerization. Pincer-type [Namido, Npyridine, Namido]HfMe2 complexes were prepared by reacting in situ generated HfMe4 with the corresponding ligand precursors, and the structure of a complex bearing 2,6-Et2C6H3Namido moieties was confirmed by X-ray crystallography. When the ligand precursors of [(CH3)R2Si-C5H3N-C(H)PhN(H)Ar (R = Me or Ph, Ar = 2,6-diisopropylphenyl) were treated with in situ generated HfMe4, pincer-type [Csilylmethyl, Npyridine, Namido]HfMe2 complexes were afforded by formation of Hf-CH2Si bond. Pincer-type [Cnaphthyl, Sthiophene, Namido]HfMe2 complex, where the pyridine moiety in the flagship catalyst was replaced with a thiophene unit, was not generated when the corresponding ligand precursor was treated with HfMe4. Instead, the [Sthiophene, Namido]HfMe3-type complex was obtained with no formation of the Hf-Cnaphthyl bond. A series of pincer-type [Cnaphthyl, Npyridine, Nalkylamido]HfMe2 complexes was prepared where the arylamido moiety in the flagship catalyst was replaced with alkylamido moieties (alkyl = iPr, cyclohexyl, tBu, adamantyl). Structures of the complexes bearing isopropylamido and adamantylamido moieties were confirmed by X-ray crystallography. Most of the complexes cleanly generated the desired ion-pair complexes when treated with an equivalent amount of [(C18H37)2N(H)Me]+[B(C6F5)4]-, which showed negligible activity in olefin polymerization. Some complexes bearing bulky substituents showed moderate activities, even though the desired ion-pair complexes were not cleanly afforded.
| S-EPMC6540127 | biostudies-literature
Project description:The three isomorphous [3.3.1] metallacryptate complexes bis-(pyridinium) di-aqua-dipyridine-hexa-kis-[μ3-salicyl-hydroximato(3-)]bis-[μ2-salicyl-hydroxim-ato(1-)]hexa-aluminiumgadolinium-pyridine-water (1/7.396/1), (C5H6N)2[GdAl6(C7H6NO3)2(C7H4NO3)7(C5H5N)1.855(H2O)2]·7.396C5H5N·H2O or [Hpy]2[GdAl6(H2shi)2(shi)7(py)1.855(H2O)2]·7.396py·H2O, 1, bis-(pyridinium) di-aqua-dipyridine-hexa-kis-[μ3-salicyl-hydroximato(3-)]bis-[μ2-salicyl-hydroxim-ato(1-)]hexa-aluminiumdysprosium-pyridine-water (1/7.429/1), (C5H6N)2[DyAl6(C7H6NO3)2(C7H4NO3)7(C5H5N)1.855(H2O)2]·7.429C5H5N·H2O or [Hpy]2[DyAl6(H2shi)2(shi)7(py)1.891(H2O)2]·7.429py·H2O, 2, and bis-(pyrid-in-ium) di-aqua-dipyridine-hexa-kis-[μ3-salicyl-hydroximato(3-)]bis-[μ2-salicyl-hydrox-imato(1-)]hexa-aluminiumytterbium-pyridine-water (1/7.386/1), (C5H6N)2[YbAl6(C7H6NO3)2(C7H4NO3)7(C5H5N)1.855(H2O)2]·7.429C5H5N·H2O or [Hpy]2[YbAl6(H2shi)2(shi)7(py)1.818(H2O)2]·7.386py·H2O, 3, where Hpy+ is pyridinium, shi3- is salicyl-hydroximate, and py is pyridine, consist of an aluminium-based metallacryptand that captures an Ln III ion in the central cavity. The metallacryptand portions are comprised of an Al-N-O repeat unit; thus, they can be considered three-dimensional metallacrowns. The encapsulated Ln III ions are nine-coordinate with a spherical capped-square-anti-prism geometry, while the six AlIII ions are all octa-hedral. Four of the AlIII ions are chiral centers with 2 Δ and 2 Λ stereoconfigurations. The remaining two AlIII ions have trans chelate rings from two different shi3- ligands. For 1-3, a section of the main mol-ecule is disordered induced by the presence or absence of a pyridine ligand coordinated to one of the AlIII ions. In the absence of the pyridine moiety, an H2shi- ligand moves into the space otherwise occupied by the pyridine and the phenol oxygen atom coordinates to the AlIII ion. The movement of the H2shi- ligand induces movement for the Ln III ion, for another AlIII ion that also binds the same H2shi- ligand, and for one of the shi3- ligands coordinated to the latter AlIII ion. For 1-3 the occupancy ratio of the metallacryptand portions refined to 0.8550 (13):0.1450 (13), to 0.8909 (13):0.1091 (13), and to 0.8181 (14):0.1819 (14), respectively.
| S-EPMC7472759 | biostudies-literature
Project description:The pyridylamido hafnium complex (I) discovered at Dow is a flagship catalyst among postmetallocenes, which are used in the polyolefin industry for PO-chain growth from a chain transfer agent, dialkylzinc. In the present work, with the aim to block a possible deactivation process in prototype compound I, the corresponding derivatives were prepared. A series of pyridylamido Hf complexes were prepared by replacing the 2,6-diisopropylphenylamido part in I with various 2,6-R2C6H3N-moieties (R = cycloheptyl, cyclohexyl, cyclopentyl, 3-pentyl, ethyl, or Ph) or by replacing 2-iPrC6H4C(H)- in I with the simple PhC(H)-moiety. The isopropyl substituent in the 2-iPrC6H4C(H)-moiety influences not only the geometry of the structures (revealed by X-ray crystallography), but also catalytic performance. In the complexes bearing the 2-iPrC6H4C(H)-moiety, the chelation framework forms a plane; however, this framework is distorted in the complexes containing the PhC(H)-moiety. The ability to incorporate α-olefin decreased upon replacing 2-iPrC6H4C(H)-with the PhC(H)-moiety. The complexes carrying the 2,6-di(cycloheptyl)phenylamido or 2,6-di(cyclohexyl)phenylamido moiety (replacing the 2,6-diisopropylphenylamido part in I) showed somewhat higher activity with greater longevity than did prototype catalyst I.
| S-EPMC7285347 | biostudies-literature
Project description:We demonstrate photonic crystal enhanced fluorescence (PCEF) microscopy as a surface-specific fluorescence imaging technique to study the adhesion of live cells by visualizing variations in cell-substrate gap distance. This approach utilizes a photonic crystal surface incorporated into a standard microscope slide as the substrate for cell adhesion, and a microscope integrated with a custom illumination source as the detection instrument. When illuminated with a monochromatic light source, angle-specific optical resonances supported by the photonic crystal enable efficient excitation of surface-confined and amplified electromagnetic fields when excited at an on-resonance condition, while no field enhancement occurs when the same photonic crystal is illuminated in an off-resonance state. By mapping the fluorescence enhancement factor for fluorophore-tagged cellular components between on- and off-resonance states and comparing the results to numerical calculations, the vertical distance of labelled cellular components from the photonic crystal substrate can be estimated, providing critical and quantitative information regarding the spatial distribution of the specific components of cells attaching to a surface. As an initial demonstration of the concept, 3T3 fibroblast cells were grown on fibronectin-coated photonic crystals with fluorophore-labelled plasma membrane or nucleus. We demonstrate that PCEF microscopy is capable of providing information about the spatial distribution of cell-surface interactions at the single-cell level that is not available from other existing forms of microscopy, and that the approach is amenable to large fields of view, without the need for coupling prisms, coupling fluids, or special microscope objectives.
| S-EPMC4198496 | biostudies-literature
Project description:The production of liquid crystalline (LC) polymer particles with a narrow size distribution on a large scale remains a challenge. Here, we report the preparation of monodisperse, cross-linked liquid crystalline particles via precipitation polymerization. This versatile and scalable method yields polymer particles with a smectic liquid crystal order. Although the LC monomers are randomly dissolved in solution, the oligomers self-align and LC order is induced. For the polymerization, a smectic LC monomer mixture consisting of cross-linkers and benzoic acid hydrogen-bonded dimers is used. The average diameter of the particles increases at higher polymerization temperatures and in better solvents, whereas the monomer and initiator concentration have only minor impact on the particle size. After deprotonating of the benzoic acid groups, the particles show rapid absorption of a common cationic dye, methylene blue. The methylene blue in the particles can be subsequently released with the addition of Ca2+, while monovalent ions fail to trigger the release. These results reveal that precipitation polymerization is an attractive method to prepare functional LC polymer particles of a narrow size distribution and on a large scale.
| S-EPMC6854653 | biostudies-literature
Project description:Europium, terbium, dysprosium, and samarium are the main trivalent lanthanide ions emitting in the visible spectrum. In this work, the potential of these ions for colorimetric applications and colour reproduction was studied. The conversion of spectral data to colour coordinates was undertaken for three sets of Ln complexes composed of different ligands. We showed that Eu is the most sensitive of the visible Ln ions, regarding ligand-induced colour shifts, due to its hypersensitive transition. Further investigation on the spectral bandwidth of the emission detector, on the wavelengths' accuracy, on the instrumental correction function, and on the use of incorrect intensity units confirm that the instrumental correction function is the most important spectrophotometric parameter to take into account in order to produce accurate colour values. Finally, we established and discussed the entire colour range (gamut) that can be generated by combining a red-emitting Eu complex with a green-emitting Tb complex and a blue fluorescent compound. The importance of choosing a proper white point is demonstrated. The potential of using different sets of complexes with different spectral fingerprints in order to obtain metameric colours suitable for anti-counterfeiting is also highlighted. This work answers many questions that could arise during a colorimetric analysis of luminescent probes.
| S-EPMC7570272 | biostudies-literature
Project description:Tau is an axonal protein known to form abnormal aggregates and is the biomarker of Alzheimer's disease. Metal-based therapeutics for inhibition of Tau aggregation is limited and rarely reported in contemporary science. Here, we report the first example of rationally designed molecular cobalt(II)-complexes for effective inhibition of Tau and disaggregation of preformed Tau fibrils. The mechanistic studies reveal that prevention of Tau aggregation by cobalt-based metal complexes (CBMCs) is concentration-dependent and Tau seldom exhibits conformational changes. Interestingly, CBMCs play dual role in causing disassembly of preformed aggregates as well as inhibition of complete Tau aggregation. Furthermore, CBMCs were nontoxic and maintained the tubulin network intact. CBMCs also prevented okadaic acid-induced toxicity in SH-SY5Y cells thus, preventing hyperphosphorylation of Tau. We believe that this unprecedented finding by the newly developed molecular complexes has a potential toward metal-based therapeutics for Alzheimer's disease.
| S-EPMC6796896 | biostudies-literature
Project description:We have developed a novel biosensor for kinases that is based on a kinase-responsive polymer hydrogel, which enables label-free screening of kinase activity via changes in optical properties. The hydrogel is specifically designed to swell reversibly upon phosphorylation of a target peptide, triggering a change in optical diffraction from a crystalline colloidal array of particles impregnated into the hydrogel. Diffraction measurements, and charge staining, confirmed the responsive nature of the hydrogel. Moreover, the change in diffraction of the hydrogel upon treatment with kinase exhibited a time- and dose-dependent response. A theoretical model for ionic polymer networks describes the observed optical response well and can be used to quantify the extent of phosphorylation.
| S-EPMC4333580 | biostudies-literature
Project description:The microchip lasers, being very compact and efficient sources of coherent light, suffer from one serious drawback: low spatial quality of the beam strongly reducing the brightness of emitted radiation. Attempts to improve the beam quality, such as pump-beam guiding, external feedback, either strongly reduce the emission power, or drastically increase the size and complexity of the lasers. Here it is proposed that specially designed photonic crystal in the cavity of a microchip laser, can significantly improve the beam quality. Experiments show that a microchip laser, due to spatial filtering functionality of intracavity photonic crystal, improves the beam quality factor M2 reducing it by a factor of 2, and increase the brightness of radiation by a factor of 3. This comprises a new kind of laser, the "photonic crystal microchip laser", a very compact and efficient light source emitting high spatial quality high brightness radiation.
| S-EPMC5040951 | biostudies-literature
Project description:While the metallocene polymers were comprehensively studied, other metallopolymers are rarely explored. The major challenge is the lack of a synthetic platform for the preparation of metal coordinated derivatives, monomers, and polymers. Therefore, the development of a facile synthesis of new metal coordinated monomers and polymers is critically needed. A novel successfully synthesized methacrylate-containing nickel complex is reported in this communication. Controlled RAFT polymerizations are further carried out to prepare a series of side-chain nickel containing polymers with different molecular weight and narrow Polydispersity Index (PDI). This new metallopolymer performs specific electrochemical and excellent thermal properties. This study provides a novel and convenient strategy to prepare metallopolymer with controllable molecular weight, which has potential applications in assembled, catalytic and magnetic materials.
| S-EPMC5812193 | biostudies-other