Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solution Synthesis and Characterization of a Long and Curved Graphene Nanoribbon with Hybrid Cove-Armchair-Gulf Edge Structures.

ABSTRACT: Curved graphene nanoribbons (GNRs) with hybrid edge structures have recently attracted increasing attention due to their unique band structures and electronic properties as a result of their nonplanar conformation. This work reports the solution synthesis of a long and curved multi-edged GNR (cMGNR) with unprecedented cove-armchair-gulf edge structures. The synthesis involves an efficient A₂ B₂ -type Diels-Alder polymerization between a diethynyl-substituted prefused bichrysene monomer (3b) and a dicyclopenta[e,l]pyrene-5,11-dione derivative (6) followed by FeCl₃ -mediated Scholl oxidative cyclodehydrogenation of the obtained polyarylenes (P1). Model compounds 1a and 1b are first synthesized to examine the suitability and efficiency of the corresponding polymers for the Scholl reaction. The successful formation of cMGNR from polymer P1 bearing prefused bichrysene units is confirmed by FTIR, Raman, and solid-state NMR analyses. The cove-edge structure of the cMGNR imparts the ribbon with a unique nonplanar conformation as revealed by density functional theory (DFT) simulation, which effectively enhances its dispersibility in solution. The cMGNR has a narrow optical bandgap of 1.61 eV, as estimated from the UV-vis absorption spectrum, which is among the family of low-bandgap solution-synthesized GNRs. Moreover, the cMGNR exhibits a carrier mobility of ≈2 cm² V^-1 s^-1 inferred from contact-free terahertz spectroscopy.

SUBMITTER: Yang L

PROVIDER: S-EPMC9259722 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Helical edge states and edge-state transport in strained armchair graphene nanoribbons.

Project description:A helical type edge state, which is generally supported only on graphene with zigzag boundaries, is found to also appear in armchair graphene nanoribbons in the presence of intrinsic spin-orbit coupling and a suitable strain. At a critical strain, there appears a quantum phase transition from a quantum spin Hall state to a trivial insulator state. Further investigation shows that the armchair graphene nanoribbons with intrinsic spin-orbit coupling, Rashba spin-orbit coupling, effective exchange fields and strains also support helical-like edge states with a unique spin texture. In such armchair graphene nanoribbons, the spin directions of the counterpropogating edge states on the same boundary are always opposite to each other, while is not conserved and the spins are canted away from the -direction due to the Rashba spin-orbit coupling, which is different from the case of the zigzag graphene nanoribbons. Moreover, the edge-state energy gap is smaller than that in zigzag graphene nanoribbons, even absent in certain cases.

| S-EPMC5562773 | biostudies-other

Spatially resolved electronic structures of atomically precise armchair graphene nanoribbons.

Project description:Graphene has attracted much interest in both academia and industry. The challenge of making it semiconducting is crucial for applications in electronic devices. A promising approach is to reduce its physical size down to the nanometer scale. Here, we present the surface-assisted bottom-up fabrication of atomically precise armchair graphene nanoribbons (AGNRs) with predefined widths, namely 7-, 14- and 21-AGNRs, on Ag(111) as well as their spatially resolved width-dependent electronic structures. STM/STS measurements reveal their associated electron scattering patterns and the energy gaps over 1 eV. The mechanism to form such AGNRs is addressed based on the observed intermediate products. Our results provide new insights into the local properties of AGNRs, and have implications for the understanding of their electrical properties and potential applications.

| S-EPMC3523290 | biostudies-literature

On-surface Synthesis of a Chiral Graphene Nanoribbon with Mixed Edge Structure.

Project description:Chiral graphene nanoribbons represent an important class of graphene nanomaterials with varying combinations of armchair and zigzag edges conferring them unique structure-dependent electronic properties. Here, we describe the on-surface synthesis of an unprecedented cove-edge chiral GNR with a benzo-fused backbone on a Au(111) surface using 2,6-dibromo-1,5-diphenylnaphthalene as precursor. The initial precursor self-assembly and the formation of the chiral GNRs upon annealing are revealed, along with a relatively small electronic bandgap of approximately 1.6 eV, by scanning tunnelling microscopy and spectroscopy.

| S-EPMC7756733 | biostudies-literature

Ultra-narrow metallic armchair graphene nanoribbons.

Project description:Graphene nanoribbons (GNRs)-narrow stripes of graphene-have emerged as promising building blocks for nanoelectronic devices. Recent advances in bottom-up synthesis have allowed production of atomically well-defined armchair GNRs with different widths and doping. While all experimentally studied GNRs have exhibited wide bandgaps, theory predicts that every third armchair GNR (widths of N=3m+2, where m is an integer) should be nearly metallic with a very small bandgap. Here, we synthesize the narrowest possible GNR belonging to this family (five carbon atoms wide, N=5). We study the evolution of the electronic bandgap and orbital structure of GNR segments as a function of their length using low-temperature scanning tunnelling microscopy and density-functional theory calculations. Already GNRs with lengths of 5?nm reach almost metallic behaviour with ?100?meV bandgap. Finally, we show that defects (kinks) in the GNRs do not strongly modify their electronic structure.

| S-EPMC4682157 | biostudies-literature

DNA base-specific modulation of microampere transverse edge currents through a metallic graphene nanoribbon with a nanopore.

Project description:We study two-terminal devices for DNA sequencing that consist of a metallic graphene nanoribbon with zigzag edges (ZGNR) and a nanopore in its interior through which the DNA molecule is translocated. Using the nonequilibrium Green functions combined with density functional theory, we demonstrate that each of the four DNA nucleobases inserted into the nanopore, whose edge carbon atoms are passivated by either hydrogen or nitrogen, will lead to a unique change in the device conductance. Unlike other recent biosensors based on transverse electronic transport through translocated DNA, which utilize small (of the order of pA) tunneling current across a nanogap or a nanopore yielding a poor signal-to-noise ratio, our device concept relies on the fact that in ZGNRs local current density is peaked around the edges so that drilling a nanopore away from the edges will not diminish the conductance. Inserting a nucleobase into the nanopore affects the charge density in the surrounding area, thereby modulating edge conduction currents whose magnitude is of the order of microampere at bias voltage 0.1 V. The proposed biosensors are not limited to ZGNRs and they could be realized with other nanowires supporting transverse edge currents, such as chiral GNRs or wires made of two-dimensional topological insulators.

| S-EPMC3272331 | biostudies-literature

Theoretical Study on a Nitrogen-Doped Graphene Nanoribbon with Edge Defects as the Electrocatalyst for Oxygen Reduction Reaction.

Project description:Both theory and experiment show that sp2 carbon nanomaterials doped with N have great potential as high-efficiency catalysts for oxygen reduction reactions (ORR). At present, there are theoretical studies that believe that C-sites with positive charge or high-spin density values have higher adsorption capacity, but there are always some counter examples, such as the N-doped graphene nanoribbons with edge defects (ND-GNR) of this paper. In this study, the ORR mechanism of ND-GNR was studied by density functional theory (DFT) calculation, and then the carbon ring resonance energy was analyzed from the perspective of chemical graph theory to elucidate the cause and distribution of active sites in ND-GNR. Finally, it was found that the overpotential of the model can be adjusted by changing the width of the model or dopant atoms while still ensuring proper adsorption energy (between 0.5 and 2.0 eV). The minimum overpotential for these models is approximately 0.36 V. These findings could serve as guidelines for the construction of efficient ORR carbon nanomaterial catalysts.

| S-EPMC7081414 | biostudies-literature

Multiple heteroatom substitution to graphene nanoribbon.

Project description:Substituting heteroatoms into nanostructured graphene elements, such as graphene nanoribbons, offers the possibility for atomic engineering of electronic properties. To characterize these substitutions, functionalized atomic force microscopy (AFM)-a tool to directly resolve chemical structures-is one of the most promising tools, yet the chemical analysis of heteroatoms has been rarely performed. We synthesized multiple heteroatom-substituted graphene nanoribbons and showed that AFM can directly resolve elemental differences and can be correlated to the van der Waals radii, as well as the modulated local electron density caused by the substitution. This elemental-sensitive measurement takes an important step in the analysis of functionalized two-dimensional carbon materials.

| S-EPMC5898832 | biostudies-literature

Solution-processable graphene nanomeshes with controlled pore structures.

Project description:Graphene nanomeshes (GNMs) which can be cheaply produced on a large scale and processed through wet approaches are important materials for various applications, including catalysis, composites, sensors and energy related systems. Here, we report a method for large scale preparation of GNMs by refluxing reduced graphene oxide sheets in concentrated nitric acid solution (e.g., 8 moles per liter). The diameters of nanopores in GNM sheets can be readily modulated from several to hundreds nanometers by varying the time of acid treatment. The porous structure increased the specific surface areas of GNMs and the transmittances of GNM-based thin films. Furthermore, GNMs have large number of carboxyl groups at the edges of their nanopores, leading to good dispersibility in aqueous media and strong peroxidase-like catalytic activity.

| S-EPMC3683665 | biostudies-literature

Ab Initio Properties of Hybrid Cove-Edged Graphene Nanoribbons as Metallic Electrodes for Peptide Sequencing via Transverse Tunneling Current.

Project description:Recently synthesized metallic cove-edged graphene nanoribbons are considered for use as one-dimensional (1D) electrodes for ideal atomistically resolved recognition of amino acids. To this purpose a narrow nanogap device is considered, and the transversal tunneling current flowing across it is calculated during the translocation of a model Gly homopeptide using the nonequilibrium Green function scheme, based on density functional theory. We show that the signal collected from the metallic spin states is characterized by a double peak per residue in analogy with the results obtained with 1D graphene nanoribbon template electrodes. The presented results pave the way for experimentally feasible atomistically resolved tunneling current recognition using metallic edge engineered graphene electrodes obtained by bottom-up fabrication strategies.

| S-EPMC9330076 | biostudies-literature

Toward cove-edged low band gap graphene nanoribbons.

Project description:Graphene nanoribbons (GNRs), defined as nanometer-wide strips of graphene, have attracted increasing attention as promising candidates for next-generation semiconductors. Here, we demonstrate a bottom-up strategy toward novel low band gap GNRs (Eg = 1.70 eV) with a well-defined cove-type periphery both in solution and on a solid substrate surface with chrysene as the key monomer. Corresponding cyclized chrysene-based oligomers consisting of the dimer and tetramer are obtained via an Ullmann coupling followed by oxidative intramolecular cyclodehydrogenation in solution, and much higher GNR homologues via on-surface synthesis. These oligomers adopt nonplanar structures due to the steric repulsion between the two C-H bonds at the inner cove position. Characterizations by single crystal X-ray analysis, UV-vis absorption spectroscopy, NMR spectroscopy, and scanning tunneling microscopy (STM) are described. The interpretation is assisted by density functional theory (DFT) calculations.

| S-EPMC4456008 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data