Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dealumination and Characterization of Natural Mordenite-Rich Tuffs.

ABSTRACT: The present study evaluates the feasibility of partially dealuminated natural mordenite as a catalyst support by studying improvement in its textural properties. This is the first study that reports the dealumination of natural zeolite-based tuffs from Ecuador. For this purpose, mordenite-rich tuffs were obtained from deposits close to Guayaquil, Ecuador. The raw material was micronized in order to increase its surface, and treated with NH₄Cl. NH₄⁺ cation-exchanged samples were finally reacted with HCl_(aq) to complete the dealumination process. The partially dealuminated samples were characterized using techniques such as XRD, FT-IR, SEM-EDS, and identification of their textural properties. Dealumination with HCl_(aq) increased the Si/Al ratio up to 9 and kept the crystallographic structure of natural mordenite, as XRD results showed that the structure of mordenite was not altered after the dealumination process. On the other hand, textural properties such as surface area and microporosity were improved as compared to natural mordenite. In view of these results, the feasibility of using natural mordenite as a catalyst support is discussed in this study.

SUBMITTER: Adriano A

PROVIDER: S-EPMC9267643 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Natural Mordenite from Spain as Pozzolana.

Project description:This work deals with anomalous concentrations of natural mordenite in the southeast of Spain. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies evidenced that the samples contain mainly monomineral zeolitic phase of mordenite (70% to 74%), usually accompanied by smectite (montmorillonite), the principal component of bentonite. A study of the applicability of these zeolites is presented to establish the potential use as pozzolanic cements. For comparative purposes, synthetic commercial mordenite is also characterized and tested. The initial mixtures were prepared using cement and mordenite at a 75:25 ratio. Chemical analysis and a pozzolanicity test showed the high pozzolanic character. These mixtures were further added to sand and water, yielding the cement specimens to be used as concrete. Mechanical test results showed that the mechanical compression at 7 and 28 days fall into the range of 19.23 to 43.05 MegaPascals (MPa) for the cement specimens built with natural mordenites. The obtained results fall in the same range of cement specimens prepared with natural clinoptilolite, using mixtures within the European requirement for commercial concretes. Thus, these results and the low cost of natural mordenite of San José de los Escullos deposit supports the potential use of natural mordenite as pozzolanic cement.

| S-EPMC7179431 | biostudies-literature

Unpredicted photocatalytic activity of clinoptilolite-mordenite natural zeolite.

Project description:Zeolites are not often used directly as photocatalysts. Their framework and nanocavities have served as support or hosts for photoactive materials or traces of transition metals functioning as photoactive sites for catalysing decomposition and oxidation reactions in the gas phase. Research in this area has been limited to a few synthetic zeolites and in this context, efforts are directed to the preparation of new zeolite-based photocatalysts, when in nature there is an abundance of materials with properties yet to be discovered. We report the application of a natural clinoptilolite-mordenite zeolite as an efficient self-photocatalytic material for the decomposition of caffeine in aqueous solution. Adsorption experiments, combined with textural, crystallographic, and spectroscopic characterization were performed comparatively for the natural zeolite, a synthetic homologue, and the iron-exchanged zeolite. The neat zeolite containing 1.2 wt% of endogenous iron exhibited 99% decomposition of caffeine after 4 h irradiation and a faster reaction rate, followed by the synthetic sample. In contrast, the iron-loaded sample was the less effective zeolite because of pore blocking. Caffeine adsorption occurred on the outer zeolite surface and the photoproducts were hydroxylated pyrimidine rings and linear amide derivatives.

| S-EPMC9057343 | biostudies-literature

Organic Structure-Directing Agent-Free Synthesis of Mordenite-Type Zeolites Driven by Al-Rich Amorphous Aluminosilicates.

Project description:Mordenite (MOR)-type zeolites with a Si/Al molar ratio of up to 13 with crystallite sizes of ca. 60 nm were successfully synthesized from Al-rich aluminosilicates with a Si/Al ratio of 2 and additional SiO2 under seed-assisted hydrothermal conditions for 6 h or longer without any organic structure-directing agents (OSDAs). In stark contrast, under the same hydrothermal conditions for 6 h, control experiments using starting reagent(s), such as Al-poor aluminosilicate, pure SiO2, tetraethyl orthosilicate, and Al(NO3)3, all of which are typically employed for zeolite synthesis, failed to yield MOR-type zeolites. The penta-coordinated Al species, which are present in Al-rich aluminosilicates and are more reactive than the tetra- and hexa-coordinated Al species typically found in alumina and Al-poor aluminosilicates, played a decisive role in the OSDA-free synthesis of MOR-type zeolites.

| S-EPMC7931214 | biostudies-literature

Uptake and release characteristics of serotonin hydrochloride by natural Cuban zeolite containing clinoptilolite and mordenite.

Project description:Serotonin (5-HT) plays an important role in human physiology. An excess of this native regulator within the human gut can be partially controlled by orally consuming zeolite. Therefore, this study focuses on the kinetics of the uptake and release of serotonin hydrochloride (5-HT-hc) by natural Cuban zeolite containing clinoptilolite and mordenite at different pH levels using UV-Vis spectroscopy. 5-HT-hc is stable under the following investigated experimental conditions: incubation temperature of 36 °C; and at a pH of 5, 7, and 9. Independent of the zeolite framework, the 5-HT-hc is adsorbed without changing its molecular structure. The uptake and release of 5-HT-hc were not correlated to the textural properties of these aluminosilicates. The investigated zeolites adsorbed 5-HT-hc at about 14 mg per gram zeolite with no large differences observed between different samples. Release studies of 5-HT-hc-loaded zeolite revealed that the 5-HT-hc is strongly bound to the zeolite, and independent of the pH value and zeolite framework only up to 12.7% was released into the water.

| S-EPMC8275685 | biostudies-literature

Selective collection of iron-rich dust particles by natural Trichodesmium colonies.

Project description:Dust is an important iron (Fe) source to the ocean, but its utilization by phytoplankton is constrained by rapid sinking and slow dissolution dust-bound iron (dust-Fe). Colonies of the globally important cyanobacterium, Trichodesmium, overcome these constraints by efficient dust capturing and active dust-Fe dissolution. In this study we examined the ability of Trichodesmium colonies to maximize their Fe supply from dust by selectively collecting Fe-rich particles. Testing for selectivity in particle collection, we supplied ~600 individual colonies, collected on multiple days from the Gulf of Aqaba, with natural dust and silica minerals that were either cleaned of or coated with Fe. Using a stereoscope, we counted the number of particles retained by each colony shortly after addition and following 24 h incubation with particles, and documented translocation of particles to the colony core. We observed a strong preference for Fe-rich particles over Fe-free particles in all tested parameters. Moreover, some colonies discarded the Fe-free particles they initially collected. The preferred collection of Fe-rich particles and disposal of Fe-free particles suggest that Trichodesmium can sense Fe and selectively choose Fe-rich dust particles. This ability assists Trichodesmium obtain Fe from dust and facilitate its growth and subsequent contribution to nutrient cycling and productivity in the ocean.

| S-EPMC6908701 | biostudies-literature

Isolation of surfactant-resistant bacteria from natural, surfactant-rich marine habitats.

Project description:Environmental remediation efforts often utilize either biodegradative microbes or surfactants, but not in combination. Coupling both strategies holds the potential to dramatically increase the rate and extent of remediation because surfactants can enhance the bioavailability of contaminants to microbes. However, many surfactants permeabilize bacterial cell membranes and are effective disinfectants. An important goal then is to find or genetically modify microorganisms that possess both desirable degradative capabilities and the ability to thrive in the presence of surfactants. The guts of some marine invertebrates, particularly deposit feeders, have previously been shown to contain high levels of biosurfactants. Our primary aim was to mine these natural, surfactant-rich habitats for surfactant-resistant bacteria. Relative to sediment porewaters, the gut contents of two polychaete deposit feeders, Nereis succinea and Amphitrite ornata, exhibited a significantly higher ratio of bacteria resistant to both cationic and anionic surfactants. In contrast, bacteria in the gut fluids of a holothuroid, Leptosynapta tenuis, showed surfactant susceptibility similar to that of bacteria from sediments. Analyses of 16S rRNA gene sequences revealed that the majority of surfactant-resistant isolates were previously undescribed species of the genus Vibrio or were of a group most closely related to Spongiobacter spp. We also tested a subset of resistant bacteria for the production of biosurfactants. The majority did produce biosurfactants, as demonstrated via the oil-spreading method, but in all cases, production was relatively weak under the culture conditions employed. Novel surfactant-resistant, biosurfactant-producing bacteria, and the habitats from which they were isolated, provide a new source pool for potential microorganisms to be exploited in the in situ bioremediation of marine sediments.

| S-EPMC2519273 | biostudies-literature

Ultrasonic Pretreatment as a Tool for the Preparation of Low-Defect Zeolite Mordenite.

Project description:The effects of the ultrasonic (US) pretreatment of synthesis gel for the preparation of mordenite zeolite were studied in comparison with the classical stirring method. Even though the US pretreatment was performed before the hydrothermal crystallization, it significantly affected the properties of the obtained mordenite crystals. The US-assisted procedure resulted in a material with improved textural characteristics, in particular, the micropore volume accessible for nitrogen molecules in the as-made form. On the other hand, mordenite prepared with the classical stirring method demonstrated comparable sorption properties only after a postsynthetic treatment. Moreover, in the case of US-pretreated mordenite, altered crystal shape and more homogeneous morphology were observed. 29Si magic-angle spinning nuclear magnetic resonance (MAS NMR) demonstrated that the US pretreatment introduced structural changes on the atomic level, resulting in fewer defects (reflected in the number of silanol groups) and less pore blockage (affected by Na+ cations) for the as-made sample.

| S-EPMC7841940 | biostudies-literature

Synthesis of hierarchical mordenite by solvent-free method for dimethyl ether carbonylation reaction.

Project description:A series of hierarchical mordenite (MOR) catalysts were synthesized by adding soft templates via the solvent-free method. The influence of different kinds of soft templates on the structure, morphology and acid sites of mordenite were systematically characterized. The characterization results revealed that the addition of soft templates could successfully introduce hierarchical structure into the system while maintaining good crystallinity. The specific surface area and pore volume became larger. Surfactants could also affect the amount and distribution of acid sites, which in turn would affect the dimethyl ether carbonylation activity. Compared with cationic and nonionic surfactants, the addition of anionic surfactants such as sodium dodecyl benzene sulfonate could result in more Al species to preferentially enter into the 8 member ring, thus enhancing the amount of active sites for the carbonylation reaction while weakening the strength. Meanwhile, the addition of sodium dodecyl benzene sulfonate could also reduce the number of strong acid sites in the 12 member ring and obviously improve the carbonylation performance.

| S-EPMC10843276 | biostudies-literature

Importance of Methane Chemical Potential for Its Conversion to Methanol on Cu-Exchanged Mordenite.

Project description:Copper-oxo clusters exchanged in zeolite mordenite are active in the stoichiometric conversion of methane to methanol at low temperatures. Here, we show an unprecedented methanol yield per Cu of 0.6, with a 90-95?% selectivity, on a MOR solely containing [Cu3 (?-O)3 ]2+ active sites. DFT calculations, spectroscopic characterization and kinetic analysis show that increasing the chemical potential of methane enables the utilization of two ?-oxo bridge oxygen out of the three available in the tricopper-oxo cluster structure. Methanol and methoxy groups are stabilized in parallel, leading to methanol desorption in the presence of water.

| S-EPMC7317825 | biostudies-literature

Mechanochemically-assisted solvent-free and template-free synthesis of zeolites ZSM-5 and mordenite.

Project description:Aluminosilicate-based zeolite materials, such as ZSM-5 and mordenite, are well-studied as catalysts. Typical approaches to synthesize these zeolites require either templates or seeds to direct ordered crystal growth and both of these are expensive and add to the complexity of zeolite synthesis. In this paper, we describe a solvent-free and template-free method to synthesize crystalline ZSM-5 and mordenite zeolites without any added seed crystals. Key to the success of this approach is a mechanochemical precursor pre-reaction step. High-energy ball-milling is used to initiate a solid-state metathesis (exchange) reaction between Na2SiO3 and Al2(SO4)3 reagents, forming crystalline Na2SO4 and well-mixed aluminosilicate precursor. The solid precursor mixture is thermally converted to crystalline ZSM-5 or mordenite at moderate 180 °C temperatures without solvents or an organic amine structure directing template. Variations in Si/Al ratios in the precursor mixture and additions of solid NaOH to the mechanochemical reaction were found to influence the subsequent growth of either crystalline ZSM-5 or mordenite zeolites. The crystalline zeolites from this solvent-free and template free method have high ∼300 m2 g-1 surface areas directly from the synthesis without requiring high-temperature calcination. These materials are also comparably active to their commercial counterparts in cellulose and glucose biomass catalytic conversion to hydroxymethylfurfural.

| S-EPMC9418510 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data