Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

TiO₂/Karaya Composite for Photoinactivation of Bacteria.

ABSTRACT: TiO₂/Karaya composite was synthesized by the sol-gel method for the photoinactivation of pathogens. This is the first time that we have reported this composite for an antimicrobial approach. The structure, morphology, and optical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-rays (EDS), Fourier transform infrared spectroscopy (FTIR), and diffuse reflectance, and the surface area was characterized by the BET method. The XRD and EDS results showed that the TiO₂/Karaya composite was successfully stabilized by the crystal structure and pore diameter distribution, indicating a composite of mesoporous nature. Furthermore, antibacterial experiments showed that the TiO₂/Karaya composite under light was able to photoinactivate bacteria. Therefore, the composite is a promising candidate for inhibiting the growth of bacteria.

SUBMITTER: Lopes ACB

PROVIDER: S-EPMC9267801 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mesoporous TiO2/TiC@C Composite Membranes with Stable TiO2-C Interface for Robust Lithium Storage.

Project description:Transition metal oxides/carbon (TMOs/C) composites are important for high-performance lithium-ion batteries (LIBs), but the development of interface-stable TMOs/C composite anodes for robust lithium storage is still a challenge. Herein, mesoporous TiO2/TiC@C composite membranes were synthesized by an in situ carbothermic reduction method. TiC nanodots with high conductivity and electrochemical inactivity at the TiO2-C interface can significantly enhance the electrical conductivity and structural stability of the membranes. Finite element simulations demonstrate that the TiO2/TiC@C membranes can effectively alleviate tensile and compression stress effects upon lithiation, which is beneficial for robust lithium storage. When used as additives and binder-free electrodes, the TiO2/TiC@C membranes show excellent cycling capability and rate performance. Moreover, a flexible full battery can be assembled by employing the TiO2/TiC@C membranes and shows good performance, highlighting the potential of these membranes in flexible electronics. This work opens an avenue to constructing interface-stable composite structures for the next-generation high-performance LIBs.

| S-EPMC6137325 | biostudies-literature

TiO2/Porous Carbon Composite-Decorated Separators for Lithium/Sulfur Battery.

Project description:The practical application of lithium/sulfur (Li/S) batteries is hindered by the migration of soluble polysulfides (Li2Sn, 4???n???8) from cathode to anode, leading to poor electrochemical stability of the cell. To address this issue, in the present study, a TiO2/porous carbon (TiO2/PC) composite-coated Celgard 2400 separator was successfully fabricated and used as a polysulfide barrier for the Li/S battery. In TiO2/PC, the highly conductive PC with three-dimensional ordered porous structure physically constrains polysulfides and at the same time serves as an additional upper current collector. On the other hand, the TiO2 on the surface of PC chemically adsorbed polysulfides during the charge/discharge process. Due to the physical and chemical adsorption properties of TiO2/PC composite coating layer, an initial discharge capacity of 926 mAh g-1 at 0.1 C and a low fading rate (75% retention after 150?cycles) were achieved. Moreover, in the rate capability test, the discharge capacity for the TiO2/PC-modified Li/S battery was recovered to 728 mAh g-1 at 0.1 C after high-rate cycling and remained ~?88% of the initial reversible capacity.

| S-EPMC6538749 | biostudies-literature

Advanced Removal of Dyes with Tuning Carbon/TiO2 Composite Properties.

Project description:This study evaluates the removal of several dyes with different charge properties, i.e., anionic (Acid Red 88), cationic (Basic Red 13), and neutral (Basic Red 5) using transition metal-doped TiO2 supported on a high-surface-area activated carbon. Experimental results confirm the successful deposition of TiO2 and the derivatives (Zr-, Cu-, and Ce-doped samples) on the surface of the activated carbon material and the development of extended heterojunctions with improved electronic properties. Incorporating a small percentage of dopants significantly improves the adsorption properties of the composites towards the three dyes evaluated, preferentially for sample AC/TiO2_Zr. Similarly, the photodegradation efficiency highly depends on the nature of the composite evaluated and the characteristics of the dye. Sample AC/TiO2_Zr demonstrates the best overall removal efficiency for Acid Red 88 and Basic Red 5-83% and 63%, respectively. This promising performance must simultaneously be attributed to a dual mechanism, i.e., adsorption and photodegradation. Notably, the AC/TiO2_Ce outperformed the other catalysts in eliminating Basic Red 13 (74%/6 h). A possible Acid Red 88 degradation mechanism using AC/TiO2_Zr was proposed. This study shows that the removal efficiency of AC/TiO2 composites strongly depends on both the material and pollutant.

| S-EPMC10856939 | biostudies-literature

Ocean wave energy generator based on graphene/TiO2 nanoparticle composite films.

Project description:Harvesting ocean wave energy through carbon-based materials, particularly graphene, is receiving increasing attention. However, the complicated fabrication process and the low output power of the present monolayer graphene-based wave energy generators limit their further application. Here, we demonstrate the facile fabrication of a new type of wave energy generator based on graphene/TiO2 nanoparticle composite films using the doctor-blading method. The developed wave energy harvesting device exhibits a high open-circuit voltage of up to 75 millivolts and a high output power up to 1.8 microwatts. A systematic study was conducted to explore the optimal conditions for the energy harvesting performance.

| S-EPMC9418561 | biostudies-literature

Enhancement of the Green H2 Production by Using TiO2 Composite Polybenzimidazole Membranes.

Project description:This study reports the hydrogen production using TiO2 based composite polybenzimidazole membranes through the SO2 depolarized electrolysis that requires lower energy input than the direct water electrolysis. Composite membranes prepared and studied in this work showed very promising results in terms of proton conductivity, chemical stability, and crossover. Thus, a reduction in SO2 crossover was observed with the increase of the concentration of TiO2, obtaining reductions as high as 42% with the 3.0 wt% TiO2-PBI membrane at 120 °C. Higher hydrogen production rates and Faradaic efficiencies were achieved by all the composite membranes, with an optimum for the 1.0 wt% TiO2-PBI membrane (with this membrane, the production of hydrogen increased a 53% at 110 °C and a 49% at 120 °C as compared with the standard PBI membrane), demonstrated the benefit of the use of composite membranes with respect to the standard one for green hydrogen production.

| S-EPMC9457720 | biostudies-literature

Lychee-like TiO2@TiN dual-function composite material for lithium-sulfur batteries.

Project description:Lithium-sulfur (Li-S) batteries are promising candidates for next generation rechargeable batteries because of their high energy density of 2600 W h kg-1. However, the insulating nature of sulfur and Li2S, the "shuttle effect" of lithium polysulfides (LiPSs), and the volumetric change of sulfur electrodes limit the practical application of Li-S batteries. Here, lychee-like TiO2@TiN hollow spheres (LTTHS) have been developed that combine the advantages of high adsorption TiO2 and high conductivity TiN to achieve smooth adsorption/spread/conversion of LiPSs and use them as a sulfur host material in Li-S batteries for the first time. The cathode exhibits an initial specific capacity of 1254 mA h g-1 and a reversible capacity of 533 mA h g-1 after 500 cycles at 0.2C, which corresponds to an average coulombic efficiency up to 99%. The cell with the LTTHS@S cathode achieved an extended lifespan of over 1000 cycles. Such good performance can be assigned to the good adsorption and catalysis of the dual-function TiO2@TiN composite. This work proved that the TiO2@TiN composite can be an attractive matrix for sulfur cathodes.

| S-EPMC9048996 | biostudies-literature

Effect of TiO2 on Selected Pathogenic and Opportunistic Intestinal Bacteria.

Project description:Food-grade titanium dioxide (TiO2) containing a nanoparticle fraction (TiO2 NPs-nanoparticles) is widely used as a food additive (E171 in the EU). In recent years, questions concerning its effect on the gastrointestinal microbiota have been raised. In the present study, we examined interactions between bacteria and TiO2. The study involved six pathogenic/opportunistic bacterial strains and four different-sized TiO2 types: three types of food-grade E171 compounds and TiO2 NPs (21 nm). Each bacterial strain was exposed to four concentrations of TiO2 (60, 150, 300, and 600 mg/L TiO2). The differences in the growth of the analyzed strains, caused by the type and concentration of TiO2, were observed. The growth of a majority of the strains was shown to be inhibited after exposure to 300 and 600 mg/L of the food-grade E171 and TiO2 NPs.

| S-EPMC9023387 | biostudies-literature

An investigation of Li2TiO3-coke composite anode material for Li-ion batteries.

Project description:Anode material Li2TiO3-coke was prepared and tested for lithium-ion batteries. The as-prepared material exhibits excellent cycling stability and outstanding rate performance. Charge/discharge capacities of 266 mA h g-1 at 0.100 A g-1 and 200 mA h g-1 at 1.000 A g-1 are reached for Li2TiO3-coke. A cycling life-time test shows that Li2TiO3-coke gives a specific capacity of 264 mA h g-1 at 0.300 A g-1 and a capacity retention of 92% after 1000 cycles of charge/discharge.

| S-EPMC9064618 | biostudies-literature

Kinetic Aspects of Benzene Degradation over TiO2-N and Composite Fe/Bi2WO6/TiO2-N Photocatalysts under Irradiation with Visible Light.

Project description:In this study, composite materials based on nanocrystalline anatase TiO2 doped with nitrogen and bismuth tungstate are synthesized using a hydrothermal method. All samples are tested in the oxidation of volatile organic compounds under visible light to find the correlations between their physicochemical characteristics and photocatalytic activity. The kinetic aspects are studied both in batch and continuous-flow reactors, using ethanol and benzene as test compounds. The Bi2WO6/TiO2-N heterostructure enhanced with Fe species efficiently utilizes visible light in the blue region and exhibits much higher activity in the degradation of ethanol vapor than pristine TiO2-N. However, an increased activity of Fe/Bi2WO6/TiO2-N can have an adverse effect in the degradation of benzene vapor. A temporary deactivation of the photocatalyst can occur at a high concentration of benzene due to the fast accumulation of non-volatile intermediates on its surface. The formed intermediates suppress the adsorption of the initial benzene and substantially increase the time required for its complete removal from the gas phase. An increase in temperature up to 140 °C makes it possible to increase the rate of the overall oxidation process, and the use of the Fe/Bi2WO6/TiO2-N composite improves the selectivity of oxidation compared to pristine TiO2-N.

| S-EPMC10051460 | biostudies-literature

Catalytic behavior of a ZnO/TiO2 composite in the synthesis of polycarbonate diol.

Project description:ZnO/TiO2 catalysts with different ZnO contents have been prepared through equal volume impregnation method, characterized by XRD, SEM, Py-IR, ICP, XPS, NH3-TPD and N2 adsorption/desorption, and evaluated in the synthesis of polycarbonate diol (PCDL) through transesterification. The results showed that titanium zinc oxide formed in these catalysts, and the content of acidic sites varied with the ZnO content, and ZnO/TiO2 (10%) has the highest acid amount. The ZnO/TiO2 (20%) with medium acidic sites showed the highest catalytic activity. The synthesis process of polycarbonate glycol was also optimized. Under the optimal reaction conditions, the yield of PCDL was 72.5%, and the M n reached 4829 g mol-1 with a PDI of 1.6.

| S-EPMC9903354 | biostudies-literature