Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical Behavior of Nanoporous Gold/Polypyrrole Supercapacitor under Deformation.

ABSTRACT: Due to the high demand of wearable electronics, flexible supercapacitors have been extensively developed in recent years. Yet, the effect of deformation in the interior electrode material suffered in practical applications on the performance received less attention. Here, we study the electrochemical behavior of macroscopic nanoporous gold/polypyrrole (NPG/PPy) in situ under compression deformation. Dealloying-driven NPG, a network constructed by bi-continuous nano-scaled ligaments and pores, can serve as a compression-tolerant substrate for PPy supercapacitor material. The electrochemical capacitance of NPG/PPy subjected to compression deformation is revealed to decrease at the scan rates and discharge current densities applied in this work. At the same time, the charge transfer resistance of NPG/PPy is found to increase. This electrochemical behavior is due to the locally reduced mass transport of electrolyte caused by the formation of new connections between the neighboring ligaments under the application of compression loads. The fundamental understanding of the effect of deformation on the performance of energy storage materials revealed in this study paves the way for their practical application in wearable devices.

SUBMITTER: Li J

PROVIDER: S-EPMC9267961 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Giant electrochemical actuation in a nanoporous silicon-polypyrrole hybrid material.

Project description:The absence of piezoelectricity in silicon makes direct electromechanical applications of this mainstream semiconductor impossible. Integrated electrical control of the silicon mechanics, however, would open up new perspectives for on-chip actuorics. Here, we combine wafer-scale nanoporosity in single-crystalline silicon with polymerization of an artificial muscle material inside pore space to synthesize a composite that shows macroscopic electrostrain in aqueous electrolyte. The voltage-strain coupling is three orders of magnitude larger than the best-performing ceramics in terms of piezoelectric actuation. We trace this huge electroactuation to the concerted action of 100 billions of nanopores per square centimeter cross section and to potential-dependent pressures of up to 150 atmospheres at the single-pore scale. The exceptionally small operation voltages (0.4 to 0.9 volts), along with the sustainable and biocompatible base materials, make this hybrid promising for bioactuator applications.

| S-EPMC7527211 | biostudies-literature

Pulse electrochemical synthesis of polypyrrole/graphene oxide@graphene aerogel for high-performance supercapacitor.

Project description:A novel electroactive polypyrrole/graphene oxide@graphene aerogel (PGO@GA) was synthesized for the first time by pulse electropolymerization. The off-time in this technique allows polypyrrole (PPy) to go through a more stable structural arrangement, meanwhile its electronic transmission performance is enhanced by immobilizing graphene oxide between PPy chains. Moreover, graphene aerogel provides a three-dimensional structure with high conductivity to protect PPy from swelling and shrinking during the capacitive testing. Under these synergistic effects, PGO@GA presents exceptional capacitive performances including high specific capacitance (625 F g-1 at 1 A g-1), excellent rate capability (keeping 478 F g-1 at 15 A g-1 with retention rate of 76.5%), and excellent cycling life (retaining 85.7% of its initial value when cycling 5000 times at 10 A g-1). Therefore, the strategy adopted by this research provides a good reference for preparing other PPy-based electrode materials applied in the fields of catalysis, sensing, adsorption and energy storage.

| S-EPMC9050804 | biostudies-literature

Electrochemical tuning of the optical properties of nanoporous gold.

Project description:Using optical in-situ measurements in an electrochemical environment, we study the electrochemical tuning of the transmission spectrum of films from the nanoporous gold (NPG) based optical metamaterial, including the effect of the ligament size. The long wavelength part of the transmission spectrum around 800?nm can be reversibly tuned via the applied electrode potential. The NPG behaves as diluted metal with its transition from dielectric to metallic response shifted to longer wavelengths. We find that the applied potential alters the charge carrier density to a comparable extent as in experiments on gold nanoparticles. However, compared to nanoparticles, a NPG optical metamaterial, due to its connected structure, shows a much stronger and more broadband change in optical transmission for the same change in charge carrier density. We were able to tune the transmission through an only 200?nm thin sample by 30%. In combination with an electrolyte the tunable NPG based optical metamaterial, which employs a very large surface-to-volume ratio is expected to play an important role in sensor applications, for photoelectrochemical water splitting into hydrogen and oxygen and for solar water purification.

| S-EPMC5343422 | biostudies-literature

Electrochemical annealing of nanoporous gold by application of cyclic potential sweeps.

Project description:An electrochemical method for annealing the pore sizes of nanoporous gold (NPG) is reported. The pore sizes of NPG can be increased by electrochemical cycling with the upper potential limit being just at the onset of gold oxide formation. This study has been performed in electrolyte solutions including potassium chloride, sodium nitrate and sodium perchlorate. Scanning electron microscopy images have been used for ligament and pore size analysis. We examine the modifications of NPG due to annealing using electrochemical impedance spectroscopy, and cyclic voltammetry and offer a comparison of the surface coverage using the gold oxide stripping method as well as the method in which electrochemically accessible surface area is determined by using a diffusing redox probe. The effect of additives adsorbed on the NPG surface when subjected to annealing in different electrolytes as well as the subsequent structural changes in NPG are also reported. The effect of the annealing process on the application of NPG as a substrate for glucose electro-oxidation is briefly examined.

| S-EPMC4350776 | biostudies-literature

Microneedle-based nanoporous gold electrochemical sensor for real-time catecholamine detection.

Project description:Dopamine (DA), epinephrine (EP), and norepinephrine (NEP) are the main catecholamine of clinical interest, as they play crucial roles in the regulation of nervous and cardiovascular systems and are involved in some brain behaviors, such as stress, panic, anxiety, and depression. Therefore, there is an urgent need for a reliable sensing device able to provide their continuous monitoring in a minimally invasive manner. In this work, the first highly nanoporous gold (h-nPG) microneedle-based sensor is presented for continuous monitoring of catecholamine in interstitial fluid (ISF). The h-nPG microneedle-based gold electrode was prepared by a simple electrochemical self-templating method that involves two steps, gold electrodeposition and hydrogen bubbling at the electrode surface, realized by sweeping the potential between + 0.8 V and 0 V vs Ag/AgCl for 25 scans in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, and successively applying a fixed potential of - 2 V vs Ag/AgCl for 60 s. The resulting microneedle-based h-nPG sensor displays an interference-free total catecholamine detection expressed as NEP concentration, with a very low LOD of 100 nM, excellent sensitivity and stability, and fast response time (< 4 s). The performance of the h-nPG microneedle array sensor was successively assessed in artificial ISF and in a hydrogel skin model at typical physiological concentrations.

| S-EPMC8989844 | biostudies-literature

Anomalous Trends in Nucleic Acid-Based Electrochemical Biosensors with Nanoporous Gold Electrodes.

Project description:Molecular diagnostics have significantly advanced the early detection of diseases, where electrochemical sensing of biomarkers has shown considerable promise. For a nucleic acid-based electrochemical sensor with signal-off behavior, the performance is evaluated by percent signal suppression (% ss), which indicates the change in current after hybridization. The % ss is generally due to more redox molecules (e.g., methylene blue) associating with the probe DNA bases in the single-strand form than the double-strand form upon hybridization with the target nucleic acid. Nanostructured electrodes generally enhance electrochemical sensor performance via several mechanisms, including increased number of capture probes per electrode volume and unique nanoscale transport phenomena. Here, we employ nanoporous gold (np-Au) as a model electrode material to study the influence of probe immobilization solution concentration on sensor performance and the underlying mechanisms. Unlike planar gold (pl-Au) electrodes, where % ss reaches a steady state with increasing concentration of the grafting solution, the % ss displays peak performance at certain grafting solution concentrations followed by rapid deterioration and reversal of the % ss polarity, suggesting an unexpected case of increased charge transfer upon hybridization. Fluorometric assessments of electrochemically desorbed nucleic acids for different electrode morphologies reveal that a significant amount of DNA molecules (unhybridized and hybridized) remain within the nanopores posthybridization. Analysis of electrochemical signals (e.g., square wave voltammogram shape) suggests that the large unbound nucleic acid concentration may be altering the modes of methylene blue interaction with the nucleic acids and charge transfer to the electrode surfaces.

| S-EPMC6751010 | biostudies-literature

Surface Defects Improved SERS Activity of Nanoporous Gold Prepared by Electrochemical Dealloying

Project description:Nanoporous metals possess excellent catalytic and optical properties that are related with surface morphology. Here, we modulated the ligament surface of nanoporous gold (NPG) by controlling electrochemical dealloying and obtained NPG with an improved enhancement of its surface-enhanced Raman scattering (SERS) property. We found that both high-density atomic steps and kinks on the curved surfaces and high-content silver atoms close to the ligament surface contributed to the high SERS ability. The presented strategy will be useful for the fabrication of nanoporous metal with an excellent surface that is needed for sensing, conversion, and catalytic.

| S-EPMC9824599 | biostudies-literature

Molecularly imprinted polymer decorated nanoporous gold for highly selective and sensitive electrochemical sensors.

Project description:Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10(-11) to 1 × 10(-9) mol L(-1) and 1 × 10(-9) to 1.4 × 10(-6) mol L(-1) with a remarkably low detection limit of 1.8 × 10(-11) mol L(-1) (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.

| S-EPMC4287724 | biostudies-other

Polypyrrole decorated metal-organic frameworks for supercapacitor devices.

Project description:Due to their large specific surface areas and porosity, metal-organic frameworks (MOFs) have found many applications in catalysis, gas separation, and gas storage. However, their use as electronic components such as supercapacitors is stunted due to their poor electrical conductivity. We report a remedy for this by combining the MOF structure with polypyrrole (PPy), a well-known conductive polymer. Three MOFs are studied for modification to this end: CPO-27-Ni and CPO-27-Co (M2DOBDC, M = Ni2+, Co2+, DOBDC = 2,5-dihydroxy-1,4-benzenedicarboxylate) and HKUST-1 (Cu3(BTC)2, BTC = 1,3,5 benzenetricarboxylate). The gravimetric capacitance of pure MOFs is boosted several orders of magnitude after reinforcement of PPy (e.g., from 0.679 to 185 F g-1 for HKUST-1 and PPy-HKUST-1, respectively), and is much higher than reported for pure PPy. In total, these PPy-d-MOFs exhibit specific capacitances up to 354 F g-1, retaining 70% of this value even after 2500 cycles. Among them, the highest capacitance is found for PPy-CPO-27-Ni (354 F g-1), followed by PPy-CPO-27-Co (263 F g-1) and PPy-HKUST-1 (185 F g-1). The maximum operating potential for these electrodes is 0.5 V, which is restricted by the contact of MOF with aqueous electrolyte and with extremely low PPy content. As a solution, higher PPy loading and rational adjustment of particle size and porosity of both MOF and PPy are recommended so that the MOF/electrolyte interface is limited, leading to more robust electrode. The work completed here describes a highly promising approach to tackling the electrically insulating nature of MOFs, paving the way for their use in electrochemical energy storage devices.

| S-EPMC9054202 | biostudies-literature

Electrochemical Discrimination of Salbutamol from Its Excipients in VentolinTM at Nanoporous Gold Microdisc Arrays.

Project description:The emergence of specific drug-device combination products in the inhalable pharmaceutical industry demands more sophistication of device functionality in the form of an embedded sensing platform to increase patient safety and extend patent coverage. Controlling the nebuliser function at a miniaturised, integrated electrochemical sensing platform with rapid response time and supporting novel algorithms could deliver such a technology offering. Development of a nanoporous gold (NPG) electrochemical sensor capable of creating a unique fingerprint signal generated by inhalable pharmaceuticals provided the impetus for our study of the electrooxidation of salbutamol, which is the active bronchodilatory ingredient in VentolinTM formulations. It was demonstrated that, at NPG-modified microdisc electrode arrays, salbutamol is distinguishable from the chloride excipient present at 0.0154 M using linear sweep voltammetry and can be detected amperometrically. In contrast, bare gold microdisc electrode arrays cannot afford such discrimination, as the potential for salbutamol oxidation and chloride adsorption reactions overlap. The discriminative power of NPG originates from the nanoconfinement effect for chloride in the internal pores of NPG, which selectively enhances the electron transfer kinetics of this more sluggish reaction relative to that of the faster, diffusion-controlled salbutamol oxidation. Sensing was performed at a fully integrated three-electrode cell-on-chip using Pt as a quasi-reference electrode.

| S-EPMC8226559 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data