Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly Effective Removal of Ofloxacin from Water with Copper-Doped ZIF-8.

ABSTRACT: Residual antibiotics in wastewater have gained widespread attention because of their toxicity to humans and the environment. In this work, Cu-doped ZIF-8s (Cu-ZIF-8s) were successfully synthesized by the impregnation of Cu²⁺ in ZIF-8 and applied in the removal of ofloxacin (OFX) from water. Remarkably, excellent adsorption performance was obtained in Cu-ZIF-8s, especially for Cu-ZIF-8-1, in which the adsorption capacity (599.96 mg·g^-1) was 4.2 times higher than that of ZIF-8 and superior to various adsorbents reported previously. The adsorption kinetics and adsorption isotherm follow the pseudo-second-order model and the Langmuir model, respectively. Furthermore, the removal efficiencies of OFX in Cu-ZIF-8-1 reached over 90% at low concentrations. It was revealed that electrostatic interaction and complexation play important roles in the adsorption process. In addition, the material can be regenerated by simple methods. Therefore, the obtained Cu-doped MOFs may have a promising application in the treatment of antibiotic-containing wastewater.

SUBMITTER: Wang X

PROVIDER: S-EPMC9268637 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

New sulfonated covalent organic framework for highly effective As(III) removal from water.

Project description:The goal of taking out As(III) from water is to reduce the detriment that poisonous metals can do to people and nature. A substance that can absorb As(III), TFPOTDB-SO3H, was made by combining 2,5-diaminobenzenesulfonic acid and 2,4,6-tris-(4-formylphenoxy)-1,3,5-triazine in a reaction that joins molecules together. This substance can adsorb As(III) very well and has excellent qualities like being easy to use again, separate substances, and filter out liquids. At pH = 8 and at room temperature, TFPOTDB-SO3H adsorbed a lot of As(III). It achieved a removal rate of 97.1 % within 10 min and could adsorb up to 344.8 mg/g. A research was conducted to investigate the effect of co-existing anions on the elimination of arsenic. The findings indicated that the presence of anions had a minimal adverse impact, reducing As(III) uptake by approximately 1-7 %. The kinetics of the uptake process were found to be controlled by the quasi-second order kinetic model, while the Langmuir isotherm model validated that the mechanism for As(III) removal was monolayer chemisorption. According to the thermodynamic analysis, the adsorption process was endothermic and occurred spontaneously. Moreover, even after 4 successive adsorption-desorption cycles, the adsorbent preserved a substantial uptake productivity of 88.86 % for As(III). The results collectively indicate that TFPOTDB-SO3H holds considerable promise for the efficient adsorption and elimination of As(III) ions from wastewater.

| S-EPMC10862688 | biostudies-literature

Highly effective removal of perfluorooctanoic acid (PFOA) in water with DBD-plasma-enhanced rice husks.

Project description:Adsorption is regarded as an efficient method to eliminate per- and polyfluoroalkyl substances from an aqueous solution. In the present investigation, an adsorbent based on rice husks (RHs) was successfully prepared by phosphoric acid (PA) activation and dielectric barrier discharge (DBD) plasma treatment, and it was used to adsorb perfluorooctanoic acid (PFOA) from water. The electrodes employed in the experiment were planar type. This research investigated RH surface properties and adsorption capacity before and after modification using DBD plasma. The results revealed that the He-O2 plasma modification introduced oxygen-containing functional groups and increased the PFOA removal efficiency. Increasing the oxygen content and total gas flow rate to 30 vol.% and 1.5 L/min, respectively, with 10 min of RH plasma treatment time at 100 W plasma discharge power enhanced the PFOA removal efficiency to 92.0%, while non-treated RH showed the removal efficiency of only 46.4%. The removal efficiency of the solution increased to 96.7% upon adjusting the pH to 4. The adsorption equilibrium isotherms fitted the Langmuir model, and the adsorption kinetic followed the pseudo-second-order model. The maximum adsorption capacity was 565 mg/g when the Langmuir isotherm model was applied.

| S-EPMC10425357 | biostudies-literature

Ligand-Doped Copper Oxo-hydroxide Nanoparticles are Effective Antimicrobials.

Project description:Bacterial resistance to antimicrobial therapies is an increasing clinical problem. This is as true for topical applications as it is for systemic therapy. Topically, copper ions may be effective and cheap antimicrobials that act through multiple pathways thereby limiting opportunities to bacteria for resistance. However, the chemistry of copper does not lend itself to facile formulations that will readily release copper ions at biologically compatible pHs. Here, we have developed nanoparticulate copper hydroxide adipate tartrate (CHAT) as a cheap, safe, and readily synthesised material that should enable antimicrobial copper ion release in an infected wound environment.First, we synthesised CHAT and showed that this had disperse aquated particle sizes of 2-5 nm and a mean zeta potential of -?40 mV. Next, when diluted into bacterial medium, CHAT demonstrated similar efficacy to copper chloride against Escherichia coli and Staphylococcus aureus, with dose-dependent activity occurring mostly around 12.5-50 mg/L of copper. Indeed, at these levels, CHAT very rapidly dissolved and, as confirmed by a bacterial copper biosensor, showed identical intracellular loading to copper ions derived from copper chloride. However, when formulated at 250 mg/L in a topically applied matrix, namely hydroxyethyl cellulose, the benefit of CHAT over copper chloride was apparent. The former yielded rapid sustained release of copper within the bactericidal range, but the copper chloride, which formed insoluble precipitates at such concentration and pH, achieved a maximum release of 10?±?7 mg/L copper by 24 h.We provide a practical formulation for topical copper-based antimicrobial therapy. Further studies, especially in vivo, are merited.

| S-EPMC5908776 | biostudies-literature

Investigation of multiple adsorption mechanisms for efficient removal of ofloxacin from water using lignin-based adsorbents.

Project description:Two series of lignin (LN)-based adsorbents, namely, cross-linked lignin (LNEs) with different crosslinking densities and carboxymethyl cross-linked lignin (LNECs) with various degrees of carboxymethyl substitution, were prepared to remove ofloxacin (OFL), a popular fluoroquinolone (FQ) antibiotic, from water. LNEs and LNECs exhibited satisfactory performance in OFL adsorption. Both of them had high adsorption capacity (the maximum contribution of 0.828?mmol/g), good anti-interference to some inorganic salts, and efficient regeneration and reuse performance. The crosslinking density and degree of carboxymethyl substitution strongly affected the content and distribution of oxygen-containing groups in these LN-based adsorbents, which played important roles in OFL adsorption. The pH dependencies of the adsorption performance of LNEs and LNECs indicated the involvement of multiple adsorption mechanisms, including hydrogen bond, electrostatic attraction, ?-? electron-donor-acceptor interactions, and negative charge-assisted hydrogen bond. Different mechanisms were dominant under various pH levels, in a near neutral pH, the synergistic effect of electrostatic attraction and ?-? interaction allows LINEs and LINECs to reach maximum adsorption capacity. Five FQs with similar structures and their two sub structural analogs were compared in terms of adsorption behavior and electrostatic potential by density functional theory using quantum chemical calculation. FQs with secondary amino groups and low ? electron cloud density readily bound to LN-based adsorbents. Hence, LNEs and LNECs were efficient and environment-friendly adsorbents.

| S-EPMC6346052 | biostudies-literature

TiO2 and N-TiO2 Sepiolite and Zeolite Composites for Photocatalytic Removal of Ofloxacin from Polluted Water.

Project description:TiO2 sepiolite and zeolite composites, as well the corresponding N-doped composites, synthesized through a sol-gel method, were tested for the photocatalytic degradation of a widespread fluoroquinolone antibiotic (ofloxacin) under environmental conditions. The catalysts were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS) analyses. A complete drug degradation occurred in 10-15 min in the presence of both TiO2 sepiolite and zeolite catalysts, and in 20-30 min with the N-doped ones. Sepiolite proved to be a better TiO2 support compared to the most common zeolite both in terms of adsorption capacity and photocatalytic efficiency in pollutants degradation. The influence of nitrogen doping (red shift from 3.2 to 3.0 eV) was also investigated. Although it was blurred by a marked increase of the particle dimension and thus a decrease of the specific surface area of the doped catalysts, it allowed a faster drug removal than direct photolysis. The photochemical paths and photoproducts were investigated, too.

| S-EPMC7040821 | biostudies-literature

Environmentally friendly chitosan/PEI-grafted magnetic gelatin for the highly effective removal of heavy metals from drinking water.

Project description:The development of environmentally friendly sorbents with a high adsorption capacity is an essential problem in the removal of heavy metals from drinking water. In this study, magnetic gelatin was prepared using transglutaminase as a cross-linker, which could only catalyze an acyl-transfer reaction between lysine and glutamine residues of the gelatin and not affect other amino groups. Therefore, it was beneficial for the further modification based on the amino groups, and did not affect the spatial structure of gelatin, which can effectively prevent the embedding of active sites in the polymer matrix. After modification with the chitosan/polyethylenimine copolymers, the numbers of amino groups was greatly increased, and the magnetic composites exhibited a high adsorption capacity, excellent water compatibility and simple magnetic separation. The adsorption capacities of lead and cadmium were 341?mg?g-1 and 321?mg?g-1, respectively, which could be used for the removal of metal ions in drinking water.

| S-EPMC5320531 | biostudies-literature

In situ Preparation of Chitosan/ZIF-8 Composite Beads for Highly Efficient Removal of U(VI).

Project description:With the rapid growth of nuclear power generation and fuel processing, the treatment of nuclear industry wastewater has become a major problem, and if not handled properly, it will pose a potential threat to the ecological environment and human health. Herein, a chitosan (CS)/ZIF-8 composite monolithic beads with ZIF-8 loading up to 60 wt% for U(VI) removal was prepared, which can be easily removed after use. It possesses a very high adsorption capacity of 629 mg•g-1 at pH = 3 for U(VI) and a well recyclability is demonstrated for at least four adsorption/desorption cycles. X-ray photoelectron spectroscopy (XPS) was carried out to study the adsorption mechanism between uranium and adsorbent, and the chelation of U(VI) ions with imidazole, hydroxyl, and amino groups was revealed. This work shows that CS/ZIF-8 composite can be used as an effective adsorbent for uranium extraction from aqueous solution, and has a potential application value in wastewater treatment.

| S-EPMC6743043 | biostudies-literature

Double layer MOFs M-ZIF-8@ZIF-67: The adsorption capacity and removal mechanism of fipronil and its metabolites from environmental water and cucumber samples.

Project description:In this study, a novel metal-organic framework (M-ZIF-8@ZIF-67) was successfully prepared using the single layer Fe3O4-ZIF-8 as magnetic core and wrapped a layer of ZIF-67 outer. This M-ZIF-8@ZIF-67 was employed as an adsorbent for the adsorption and removal of fipronil and its metabolites from environmental water and cucumber samples. The characterization results suggested that M-ZIF-8@ZIF-67 has the double layer structure a polyhedral structure with uniform pores, while ZIF-67 was successfully coated on the surface of Fe3O4-ZIF-8. The unique structure endowed M-ZIF-8@ZIF-67 a high surface area (219 m2/g) and high adsorption capacity for fipronil, fipronil desulfinyl, fipronil sulfide and fipronil sulfone. To our knowledge, this is the first report detailing the adsorption properties of M-ZIF-8@ZIF-67 with double layer structure relating to the adsorption and removal of pesticides. Furthermore, the adsorption model analysis demonstrated that the static adsorption data fitted the Freundlich bimolecular layer adsorption model better than the Langmuir monolayer adsorption model. This study indicates that M-ZIF-8@ZIF-67 has significant potential in the adsorption and removal of fipronil and its metabolites in water and vegetable samples.

| S-EPMC7176987 | biostudies-literature

NiO-PTA supported on ZIF-8 as a highly effective catalyst for hydrocracking of Jatropha oil.

Project description:Nickel oxide (NiO) and phosphotungstic acid (PTA) supported on a ZIF-8 (NiO-PTA/ZIF-8) catalyst was first synthesized and it showed high activity and good selectivity for the hydrocracking of Jatropha oil. The catalyst was characterized by SEM, SEM-EDS, TEM, N2 adsorption, FT-IR, XRD and XPS. Compared with the NiO-PTA/Al2O3 catalyst, the selectivity of C15-C18 hydrocarbon increased over 36%, and catalytic efficiency increased 10 times over the NiO-PTA/ZIF-8 catalyst. The prepared NiO-PTA/ZIF-8 catalyst was stable for a reaction time of 104 h and the kinetic behavior was also analyzed. This catalyst was found to bypass the presulfurization process, showing promise as an alternative to sulfided catalysts for green diesel production.

| S-EPMC4810320 | biostudies-literature

Ultrafiltration membrane for effective removal of chromium ions from potable water.

Project description:The objective of the present work was to investigate the efficacy of indigenously developed polyacrylonitrile (PAN) based ultrafiltration (UF) membrane for chromium ions removal from potable water. The hydrolyzed PAN membranes effectively rejected chromium anions in the feed ranging from 250?ppb to 400?ppm and a rejection of ?90% was achieved for pH???7 at low chromate concentration (?25?ppm) in feed. The rejection mechanism of chromium ions was strongly dependent on Donnan exclusion principle, while size exclusion principle for UF did not play a major role on ions rejection. Feed pH played a vital role in changing porosity of membrane, which influenced the retention behavior of chromate ions. Cross-flow velocity, pressure did not play significant role for ions rejection at low feed concentration. However, at higher feed concentration (?400?ppm), concentration polarization became important and it reduced the chromate rejection to 32% at low cross flow and high pressure. Donnan steric-partitioning pore and dielectric exclusion model (DSPM-DE) was applied to evaluate the chromate ions transport through PAN UF membrane as a function of flux by using optimized model parameters and the simulated data matched well with experimental results.

| S-EPMC5278407 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data