Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Assessment of drag measurement techniques in a shock tunnel.

ABSTRACT: Three force measurement techniques in a shock tunnel, the free-flight, movable-support force balance, and stress-wave force balance techniques were employed, and each technique's characteristics were assessed. For each force measurement technique, the system setup, data processing method, measurement uncertainties, and applied range of the test model size-flow establishment time were described in detail and compared. For a comparison and discussion, the drag coefficients of a circular pointed cone model with a semi-angle of 18.4° at a nominal freestream Mach number of 6 were measured. As a result, three force measurement techniques yield similar drag coefficients. However, the measurement uncertainties were increased in the order of the free-flight, the stress-wave force balance, and the movable-support force balance techniques. The main causes of the measurement uncertainties were the corner detection uncertainties for the free-flight techniques, and the propagation of the internal or external vibrations for the movable-support and stress-wave force balance techniques. To estimate the appropriate range of the test model size and flow establishment time for each technique's application, the force measurement systems of the present work and the available literature were compared. As a result of comparative discussion, force measurement environments that can be advantageous for each technique are suggested.

SUBMITTER: Kim K

PROVIDER: S-EPMC9269454 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Compliance assessment and flip-angle measurement of the median nerve: sonographic tools for carpal tunnel syndrome assessment?

Project description:OBJECTIVES:To assess the diagnostic performance of median nerve (MN) flip-angle measurements, deformation during wrist flexion [transit deformation coefficient (TDC)], during compression [compression deformation coefficient (CDC)] and fascicular freedom to potentially identify fibrotic MN changes in patients with carpal tunnel syndrome (CTS). METHODS:This prospective study was performed with institutional review board approval; all participants provided oral and written informed consent. Wrists in 21 healthy participants and 29 patients with CTS were examined by ultrasound. MN movement during wrist flexion, MN deformation during transition over the flexor tendons (TDC) and during controlled compression (CDC) as well as fascicular freedom were assessed. Diagnostic properties of these parameters were calculated and compared to clinical findings and cross-section area measurements (?CSA). RESULTS:Low flip angles were associated with high ?CSA at a receiver-operator characteristics area under the curve (AUC) of 0.62 (0.51-0.74). TDC [AUC, 0.83 (0.73-0.92), 76.3% (59.8-88.6%) sensitivity, 88.5% (76.6-95.7%) specificity], restricted fascicular movement [AUC, 0.86 (0.78-0.94), 89.5% (75.2-97.1%) sensitivity, 80.8% (67.5-90.4%) specificity] and compression-based CDC [AUC, 0.97 (0.94-1.00), 82.1% (66.5-92.5%) sensitivity, 94.2% (84.1-98.8%) specificity] demonstrated substantial diagnostic power (95% confidence intervals in parentheses). CONCLUSIONS:Fascicular mobility, TDC and CDC show substantial diagnostic power and may offer insights into the underlying pathophysiology of CTS. KEY POINTS:• Dynamic ultrasonography during wrist flexion and compression enables median nerve deformability assessment. • Overall, reduced median nerve deformability is highly indicative of CTS. • Median nerve compressibility shows higher diagnostic power than conventional cross-section area measurements.

| S-EPMC6302882 | biostudies-other

Renal Replacement Techniques in Septic Shock.

Project description:Sepsis is defined as a life-threatening organ dysfunction caused by a dysregulated host response to an infection; it carries a risk for mortality, considerably exceeding that of a mere infection. Sepsis is the leading cause for acute kidney injury (AKI) and the requirement for renal replacement therapy (RRT) in intensive care unit (ICU) patients. Almost every second critically ill patient with sepsis will develop AKI. In septic shock, the dysregulated host response to infectious pathogens leads to a cytokine storm with uncontrolled production and release of humoral proinflammatory mediators that evoke cellular toxicity and promote the development of organ dysfunction and increased mortality. In addition to treating AKI, RRT techniques can be employed for extracorporeal adsorption of inflammatory mediators using specifically developed adsorption membranes, hemoperfusion sorbent cartridges or columns; these techniques are intended to decrease the level and early deleterious effects of circulating proinflammatory cytokines and endotoxins during the first hours and days of septic shock treatment, in order to improve patient outcomes. Several methods and devices, such as high cut-off membranes, the Oxiris®-AN69 membrane, CytoSorb® and HA380 cytokine hemoadsorption, polymyxin B endotoxin adsorption, and plasmapheresis have been examined in small study series or are under evaluation as ways of improving patient outcomes in septic shock. However, to date, the data on actual outcome benefits have remained controversial, as discussed in this review.

| S-EPMC8508758 | biostudies-literature

Measurement of the Internal Frictional Drag of the Bacterial Flagellar Motor by Fluctuation Analysis.

Project description:The bacterial flagellar motor generates the torque that drives the rotation of bacterial flagellar filaments. The torque it generates depends sensitively on the frictional viscous drag on the motor, which includes the frictional viscous drag on the filaments (external load) and the internal frictional viscous drag on the rotor (internal load). The internal load was roughly estimated previously by modeling it as a sphere of a radius of 20 nm rotating in a lipid of viscosity of 100 cp but was never measured experimentally. Here, we measured the internal load by fluctuation analysis of the motor velocity traces. A similar approach should be applicable to other molecular motors.

| S-EPMC7264847 | biostudies-literature

Thermochemical nonequilibrium flow analysis in low enthalpy shock-tunnel facility.

Project description:A thermochemical nonequilibrium analysis was performed under the low enthalpy shock-tunnel flows. A quasi-one-dimensional flow calculation was employed by dividing the flow calculations into two parts, for the shock-tube and the Mach 6 nozzle. To describe the thermochemical nonequilibrium of the low enthalpy shock-tunnel flows, a three-temperature model is proposed. The three-temperature model treats the vibrational nonequilibrium of O2 and NO separately from the single nonequilibrium energy mode of the previous two-temperature model. In the three-temperature model, electron-electronic energies and vibrational energy of N2 are grouped as one energy mode, and vibrational energies of O2, O2+, and NO are grouped as another energy mode. The results for the shock-tunnel flows calculated using the three-temperature model were then compared with existing experimental data and the results obtained from one- and two-temperature models, for various operating conditions of the K1 shock-tunnel facility. The results of the thermochemical nonequilibrium analysis of the low enthalpy shock-tunnel flows suggest that the nonequilibrium characteristics of N2 and O2 need to be treated separately. The vibrational relaxation of O2 is much faster than that of N2 in low enthalpy condition, and the dissociation rate of O2 is manly influenced by the species vibrational temperature of O2. The proposed three-temperature model is able to describe the thermochemical nonequilibrium characteristics of N2 and O2 behind the incident and reflected shock waves, and the rapid vibrational freezing of N2 in nozzle expanding flows.

| S-EPMC7540898 | biostudies-literature

Advanced airway assessment techniques.

Project description: Not available

| S-EPMC8377241 | biostudies-literature

Ultrafast measurement of laser-induced shock waves.

Project description:We present measurements of laser-induced shockwave pressure rise time in liquids on a sub-nanosecond scale, using custom-designed single-mode fiber optic hydrophone. The measurements are aimed at the study of the shockwave generation process, helping to improve the effectiveness of various applications and decrease possible accidental damage from shockwaves. The developed method allows measurement of the fast shockwave rise time as close as 10 µm from an 8 µm sized laser-induced plasma shockwave source, significantly improving the spatial and temporal resolution of the pressure measurement over other types of hydrophones. The spatial and temporal limitations of the presented hydrophone measurements are investigated theoretically, with actual experimental results agreeing well with the predictions. To demonstrate the capabilities of the fast sensor, we were able to show that the shockwave rise time is linked to liquid viscosity exhibiting logarithmic dependency in the low viscosity regime (from 0.4 cSt to 50 cSt). Additionally, the shockwave rise time dependency on propagation distance close to the source in water was investigated, with shock wave rise times measured down to only 150 ps. It was found that at short propagation distances in water halving the shock wave peak pressure results in the rise time increase by approximately factor of 1.6. These results extend the understanding of shockwave behavior in low viscosity liquids.

| S-EPMC9974415 | biostudies-literature

Measurement in opaque flows: a review of measurement techniques for dispersed multiphase flows.

Project description:A review is presented of measurement techniques to characterise dispersed multiphase flows, which are not accessible by means of conventional optical techniques. The main issues that limit the accuracy and effectiveness of optical techniques are briefly discussed: cross-talk, a reduced signal-to-noise ratio, and (biased) data drop-out. Extensions to the standard optical techniques include the use of fluorescent tracers, refractive index matching, ballistic imaging, structured illumination, and optical coherence tomography. As the first non-optical technique, a brief discussion of electrical capacitance tomography is given. While truly non-invasive, it suffers from a low resolving power. Ultrasound-based techniques have rapidly evolved from Doppler-based profiling to recent 2D approaches using feature tracking. The latter is also suitable for time-resolved flow studies. Magnetic resonance velocimetry can provide time-averaged velocity fields in 3D for the continuous phase. Finally, X-ray imaging is demonstrated to be an important tool to quantify local gas fractions. While potentially very powerful, the impact of the techniques will depend on the development of acquisition and measurement protocols for fluid mechanics, rather than for clinical imaging. This requires systematic development, aided by careful validation experiments. As theoretical predictions for multiphase flows are sparse, it is important to formulate standardised ‘benchmark’ flows to enable this validation.

| S-EPMC7271021 | biostudies-literature

Review on measurement techniques of transport properties of nanowires.

Project description:Physical properties at the nanoscale are novel and different from those in bulk materials. Over the last few decades, there has been an ever growing interest in the fabrication of nanowire structures for a wide variety of applications including energy generation purposes. Nevertheless, the study of their transport properties, such as thermal conductivity, electrical conductivity or Seebeck coefficient, remains an experimental challenge. For instance, in the particular case of nanostructured thermoelectrics, theoretical calculations have shown that nanowires offer a promising way of enhancing the hitherto low efficiency of these materials in the conversion of temperature differences into electricity. Therefore, within the thermoelectrical community there has been a great experimental effort in the measurement of these quantities in actual nanowires. The measurements of these properties at the nanoscale are also of interest in fields other than energy, such as electrical components for microchips, field effect transistors, sensors, and other low scale devices. For all these applications, knowing the transport properties is mandatory. This review deals with the latest techniques developed to perform the measurement of these transport properties in nanowires. A thorough overview of the most important and modern techniques used for the characterization of different kinds of nanowires will be shown.

| S-EPMC4046576 | biostudies-literature

Different membrane order measurement techniques are not mutually consistent.

Project description:"Membrane order" is a term commonly used to describe the elastic and mechanical properties of the lipid bilayer, though its exact meaning is somewhat context- and method dependent. These mechanical properties of the membrane control many cellular functions and are measured using various biophysical techniques. Here, we ask if the results obtained from various techniques are mutually consistent. Such consistency cannot be assumed a priori because these techniques probe different spatial locations and different spatial and temporal scales. We evaluate the change of membrane order induced by serotonin using nine different techniques in lipid bilayers of three different compositions. Serotonin is an important neurotransmitter present at 100s of mM concentrations in neurotransmitter vesicles, and therefore its interaction with the lipid bilayer is biologically relevant. Our measurement tools include fluorescence of lipophilic dyes (Nile Red, Laurdan, TMA-DPH, DPH), whose properties are a function of membrane order; atomic force spectroscopy, which provides a measure of the force required to indent the lipid bilayer; 2H solid-state NMR spectroscopy, which measures the molecular order of the lipid acyl chain segments; fluorescence correlation spectroscopy, which provides a measure of the diffusivity of the probe in the membrane; and Raman spectroscopy, where spectral intensity ratios are affected by acyl chain order. We find that different measures often do not correlate with each other and sometimes even yield conflicting results. We conclude that no probe provides a general measure of membrane order and that any inference based on the change of membrane order measured by a particular probe may be unreliable.

| S-EPMC10111216 | biostudies-literature

Fatigue Assessment Strategy Using Bayesian Techniques.

Project description:Different empirical models have been proposed in the literature to determine the fatigue strength as a function of lifetime, according to linear, parabolic, hyperbolic, exponential, and other shaped solutions. However, most of them imply a deterministic definition of the S-N field, despite the inherent scatter exhibited by the fatigue results issuing from experimental campaigns. In this work, the Bayesian theory is presented as a suitable way not only to convert deterministic into probabilistic models, but to enhance probabilistic fatigue models with the statistical distribution of the percentile curves of failure probability interpreted as their confidence bands. After a short introduction about the application of the Bayesian methodology, its advantageous implementation on an OpenSource software named OpenBUGS is presented. As a practical example, this methodology has been applied to the statistical analysis of the Maennig fatigue S-N field data using the Weibull regression model proposed by Castillo and Canteli, which allows the confidence bands of the S-N field to be determined as a function of the already available test results. Finally, a question of general interest is discussed as that concerned to the recommendable number of tests to carry out in an experimental S-N fatigue program for achieving "reliable or confident" results to be subsequently used in component design, which, generally, is not adequately and practically addressed by researchers.

| S-EPMC6804179 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data