Integrated High-Throughput and Machine Learning Methods to Accelerate Discovery of Molten Salt Corrosion-Resistant Alloys.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang Y
PROVIDER: S-EPMC9284150 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The effects of ionizing radiation on materials often reduce to "bad news". Radiation damage usually leads to detrimental effects such as embrittlement, accelerated creep, phase instability, and radiation-altered corrosion. Here we report that proton irradiation decelerates intergranular corrosion of Ni-Cr alloys in molten fluoride salt at 650?°C. We demonstrate this by showing that the depth of intergranular voids resulting from Cr leaching into the salt is reduced by proton irradiation alone. Interstitial defects generated from irradiation enhance diffusion, more rapidly replenishing corrosion-injected vacancies with alloy constituents, thus playing the crucial role in decelerating corrosion. Our results show that irradiation can have a positive impact on materials performance, challenging our view that radiation damage usually results in negative effects.
| S-EPMC7347530 | biostudies-literature
Project description:Molten salts are important thermal conductors used in molten salt reactors and solar applications. To use molten salts safely, accurate knowledge of their thermophysical properties is necessary. However, it is experimentally challenging to measure these properties and a comprehensive evaluation of the full chemical space is unfeasible. Computational methods provide an alternative route to access these properties. Here, we summarize the developments in methods over the last 70 years and cluster them into three relevant eras. We review the main advances and limitations of each era and conclude with an optimistic perspective for the next decade, which will likely be dominated by emerging machine learning techniques. This article is aimed to help researchers in peripheral scientific domains understand the current challenges of molten salt simulation and identify opportunities to contribute.
| S-EPMC9814384 | biostudies-literature
Project description:Corrosion is an electrochemical phenomenon. It can occur via different modes of attack, each having its own mechanisms, and therefore there are multiple metrics for evaluating corrosion resistance. In corrosion resistant alloys (CRAs), the rate of localized corrosion can exceed that of uniform corrosion by orders of magnitude. Therefore, instead of uniform corrosion rate, more complex electrochemical parameters are required to capture the salient features of corrosion phenomena. Here, we collect a database with an emphasis on metrics related to localized corrosion. The six sections of the database include data on various metal alloys with measurements of (1) pitting potential, Epit, (2) repassivation potential, Erp, (3) crevice corrosion potential, Ecrev, (4) pitting temperature, Tpit, (5) crevice corrosion temperature, Tcrev, and (6) corrosion potential, Ecorr, corrosion current density, icorr, passivation current density, ipass, and corrosion rate. The experimental data were collected from 85 publications and include Al- and Fe-based alloys, high entropy alloys (HEAs), and a Ni-Cr-Mo ternary system. This dataset could be used in the design of highly corrosion resistant alloys.
| S-EPMC7878803 | biostudies-literature
Project description:MotivationThe Human Protein Atlas (HPA) enables the simultaneous characterization of thousands of proteins across various tissues to pinpoint their spatial location in the human body. This has been achieved through transcriptomics and high-throughput immunohistochemistry-based approaches, where over 40?000 unique human protein fragments have been expressed in E. coli. These datasets enable quantitative tracking of entire cellular proteomes and present new avenues for understanding molecular-level properties influencing expression and solubility.ResultsCombining computational biology and machine learning identifies protein properties that hinder the HPA high-throughput antibody production pipeline. We predict protein expression and solubility with accuracies of 70% and 80%, respectively, based on a subset of key properties (aromaticity, hydropathy and isoelectric point). We guide the selection of protein fragments based on these characteristics to optimize high-throughput experimentation.Availability and implementationWe present the machine learning workflow as a series of IPython notebooks hosted on GitHub (https://github.com/SBRG/Protein_ML). The workflow can be used as a template for analysis of further expression and solubility datasets.Contactebrunk@ucsd.edu or johanr@biotech.kth.se.Supplementary informationSupplementary data are available at Bioinformatics online.
| S-EPMC5870730 | biostudies-literature
Project description:The electrochemical behaviors of Al(III) deposits on Ni substrates were investigated in LiCl-KCl-AlCl? (2 wt.%) molten salts. Various electrochemical methods, including cyclic voltammetry (CV), square wave voltammetry (SWV), and open circuit chronopotentiometry (OCP) were used to explore the deposition processes of Al(III) on Ni substrates. Five kinds of Al-Ni alloys phase were firstly electrodeposited by the regulation of deposition potential form LiCl-KCl-AlCl? (2 wt.%) molten salts at 753 K. The formation of Al-Ni alloys, such as AlNi?, Ni?Al?, AlNi, Al?Ni2, and Al?Ni were confirmed by X-ray diffractometer (XRD) and the cross-section morphologies were investigated by scanning electron microscope (SEM). Meanwhile, it was found that the temperature of molten salt was another key parameter for the controlling of alloys phase. No Al-Ni alloys phase other than AlNi? and Ni?Al? could be deposited at 703 K.
| S-EPMC6265724 | biostudies-literature
Project description:Research on Fe-based biodegradable alloys for implant applications has increased considerably over the past decade. However, there is limited information on the influence of testing electrolytes on corrosion product formation and general corrosion progress. In this work, the effect of Hanks' Balanced Salt Solution (HBSS) with or without Ca2+ on the corrosion of Fe, Fe35Mn and (Fe35Mn)5Ag powder-processed coupons has been studied using potentiodynamic polarisation, Electrochemical Impedance Spectroscopy (EIS), and preliminary localised measurement of pH and dissolved oxygen concentration in close proximity to the metal surface. Both Fe35Mn and (Fe35Mn)5Ag alloys showed accelerated corrosion when compared to pure Fe based on potentiodynamic testing results, with FeMnAg exhibiting the highest corrosion rate in Ca2+-containing HBSS. The results indicate that in Ca2+-containing HBSS, the formation of a partially protective Ca/P layer decelerates the corrosion progress, whereas the Fe- and Mn-phosphates formed in Ca2+-free HBSS do not have the same effect. The Ca/P layer on (Fe35Mn)5Ag experienced a reduction in resistance following several hours of testing, indicating partial loss of its protective effect.
| S-EPMC8379481 | biostudies-literature
Project description:A high-throughput (HT) paradigm generating LC-MS-UV-ELSD-based natural product libraries to discover compounds with new bioactivities and or molecular structures is presented. To validate this methodology, an extract of the Indo-Pacific marine sponge Cacospongia mycofijiensis was evaluated using assays involving cytoskeletal profiling, tumor cell lines, and parasites. Twelve known compounds were identified including latrunculins (1-4, 10), fijianolides (5, 8, 9), mycothiazole (11), aignopsanes (6, 7), and sacrotride A (13). Compounds 1-5 and 8-11 exhibited bioactivity not previously reported against the parasite T. brucei, while 11 showed selectivity for lymphoma (U937) tumor cell lines. Four new compounds were also discovered including aignopsanoic acid B (13), apo-latrunculin T (14), 20-methoxy-fijianolide A (15), and aignopsane ketal (16). Compounds 13 and 16 represent important derivatives of the aignopsane class, 14 exhibited inhibition of T. brucei without disrupting microfilament assembly, and 15 demonstrated modest microtubule-stabilizing effects. The use of removable well plate libraries to avoid false positives from extracts enriched with only one or two major metabolites is also discussed. Overall, these results highlight the advantages of applying modern methods in natural products-based research to accelerate the HT discovery of therapeutic leads and/or new molecular structures using LC-MS-UV-ELSD-based libraries.
| S-EPMC3246535 | biostudies-literature
Project description:Real-time neutron imaging was utilized to produce a movie-like series of radiographs for in-situ observation of the remixing of liquid state immiscibility that occurs in equiatomic CoCrCu with the addition of Ni. A previous neutron imaging study demonstrated that liquid state immiscibility can be observed in-situ for the equiatomic CoCrCu alloy. In this follow-up study, equiatomic buttons of CoCrCu were placed alongside small Ni buttons inside an alumina crucible in a high-temperature vacuum furnace. The mass of the Ni buttons was specifically selected such that when melted in the same crucible as the CoCrCu buttons, the overall composition would become equiatomic CoCrCuNi. Neutron imaging was simultaneously carried out to capture 10 radiographs in 20 °C steps from 1000 °C to 1500 °C and back down to 1000 °C. This, in turn, produced a movie-like series of radiographs that allow for the observation of the buttons melting, the transition from immiscible to miscible as Ni is alloyed into the CoCrCu system, and solidification. This novel imaging process showed the phase-separated liquids remixing into a single-phase liquid when Ni dissolves into the melt, which makes this technique crucial for understanding the liquid state behavior of these complex alloy systems. As metals are not transparent to X-ray imaging techniques at this scale, neutron imaging of melting and solidification allows for the observation of liquid state phase changes in real time. Thermodynamic calculations of the isopleth for CoCrCuNix were carried out to compare the observed results to the predictions resulting from the current Thermo-Calc TCHEA3 thermodynamic database. The calculations show a very good agreement with the experimental results, as the calculations indicate that the CoCrCuNix alloy solidifies from a single-phase liquid when x ≥ 0.275, which is close to the nominal concentration of the CoCrCuNi alloy (x = 0.25). The neutron imaging shows that the solidification of CoCrCuNi results from a single-phase liquid. This is evident as no changes in the neutron attenuation were observed during the solidification of the CoCrCuNi alloy.
| S-EPMC8320920 | biostudies-literature
Project description:This work proposes a new solvent system composed of a molten salt in pressurized water, so-called hydrothermal molten salt (HyMoS). This system changes the paradigm of the solubility of inorganics in supercritical water. Using as an example NaOH, a low melting temperature salt, we show the possibility to precipitate it at a temperature above its melting one, leading to the instantaneous formation of the HyMoS. The molten salt is then capable of dissolving a large amount of inorganic salt, as exemplified with Na2SO4. This solvent system opens innovative ways with a potential to impact applications in many fields including materials synthesis, biomass conversion, recycling, green chemistry, catalysis, sustainable manufacturing and others. Beyond the impact on the hydrothermal community, this work also offers previously unexplored opportunities for the molten salt field with access to flow chemistry and insights regarding salt precipitation mechanism.
| S-EPMC7182414 | biostudies-literature
Project description:Aluminum alloys play an important role in circular metallurgy due to their good recyclability and 95% energy gain when made from scrap. Their low density and high strength translate linearly to lower greenhouse gas emissions in transportation, and their excellent corrosion resistance enhances product longevity. The durability of Al alloys stems from the dense barrier oxide film strongly bonded to the surface, preventing further degradation. However, despite decades of research, the individual elemental reactions and their influence on the nanoscale characteristics of the oxide film during corrosion in multicomponent Al alloys remain unresolved questions. Here, we build up a direct correlation between the near-atomistic picture of the corrosion oxide film and the solute reactivity in the aqueous corrosion of a high-strength Al-Zn-Mg-Cu alloy. We reveal the formation of nanocrystalline Al oxide and highlight the solute partitioning between the oxide and the matrix and segregation to the internal interface. The sharp decrease in partitioning content of Mg in the peak-aged alloy emphasizes the impact of heat treatment on the oxide stability and corrosion kinetics. Through H isotopic labelling with deuterium, we provide direct evidence that the oxide acts as a trap for this element, pointing at the essential role of the Al oxide might act as a kinetic barrier in preventing H embrittlement. Our findings advance the mechanistic understanding of further improving the stability of Al oxide, guiding the design of corrosion-resistant alloys for potential applications.
| S-EPMC10792079 | biostudies-literature