Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Impact of Wettability on Dynamic Fluid Connectivity and Flow Transport Kinetics in Porous Media.

ABSTRACT: Usually, models describing flow and transport for sub-surface engineering processes at the Darcy-scale do not take into consideration the effects of pore-scale flow regimes and fluid connectivity on average flow functions. In this article, we investigate the impact of wettability on pore-scale flow regimes. We show that fluid connectivity at the pore scale has a significant impact on average flow kinetics and therefore its contribution should not be ignored. Immiscible two-phase flow simulations were performed in a two-dimensional model of a Berea sandstone rock for wettability conditions ranging from moderately water-wet to strongly oil-wet. The simulation results show that wettability has a strong impact on invading fluid phase connectivity, which subsequently influences flow transport resistance. The effect of invading-phase connectivity and ganglion dynamics (GD) on two-phase displacement kinetics was also investigated. It was found that invading phase connectivity decreases away from the neutrally wet (intermediate wet) state. This study provides evidence that GD accelerate fluid flow transport kinetics during immiscible displacement processes. Lastly, the impact of wettability on fluid displacement efficiency and residual saturations was investigated. Maximum displacement efficiency occurred at the neutrally wet state.

SUBMITTER: Nhunduru RAE

PROVIDER: S-EPMC9285789 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Hysteresis of wettability in porous media: a review.

Project description:The process of "hysteresis" has widely attracted the attention of researchers and investigators due to its usage in many disciplines of science and engineering. Economics, physics, chemistry, electrical, mechanical, and petroleum engineering are some examples of disciplines that encounter hysteresis. However, the meaning of hysteresis varies from one field to another, and therefore, many definitions occur for this phenomenon depending on the area of interest. The "hysteresis" phenomenon in petroleum engineering has gained the attention of researchers and investigators lately, because of the role that plays in reservoir engineering and reservoir simulation. Hysteretic effects influence reservoir performance. Therefore, an accurate estimation of rock and fluid property curves has an essential role in evaluating hydrocarbon recovery processes. In this paper, a comprehensive review of research and growth on the hysteresis of wettability for its applications in petroleum engineering is reported. Also, theoretical and experimental investigations of hysteresis of wettability are compared and discussed in detail. The review highlights a range of concepts in existing models and experimental processes for wettability hysteresis. Furthermore, this paper tracks the current development of hysteresis and provides insight for future trends in the research. Finally, it reveals an outlook on the research challenges and weaknesses of hysteresis of wettability.

| S-EPMC7319405 | biostudies-literature

Fluid flow in porous media using image-based modelling to parametrize Richards' equation.

Project description:The parameters in Richards' equation are usually calculated from experimentally measured values of the soil-water characteristic curve and saturated hydraulic conductivity. The complex pore structures that often occur in porous media complicate such parametrization due to hysteresis between wetting and drying and the effects of tortuosity. Rather than estimate the parameters in Richards' equation from these indirect measurements, image-based modelling is used to investigate the relationship between the pore structure and the parameters. A three-dimensional, X-ray computed tomography image stack of a soil sample with voxel resolution of 6??m has been used to create a computational mesh. The Cahn-Hilliard-Stokes equations for two-fluid flow, in this case water and air, were applied to this mesh and solved using the finite-element method in COMSOL Multiphysics. The upscaled parameters in Richards' equation are then obtained via homogenization. The effect on the soil-water retention curve due to three different contact angles, 0°, 20° and 60°, was also investigated. The results show that the pore structure affects the properties of the flow on the large scale, and different contact angles can change the parameters for Richards' equation.

| S-EPMC5719621 | biostudies-literature

Dynamic fluid connectivity during steady-state multiphase flow in a sandstone.

Project description:The current conceptual picture of steady-state multiphase Darcy flow in porous media is that the fluid phases organize into separate flow pathways with stable interfaces. Here we demonstrate a previously unobserved type of steady-state flow behavior, which we term "dynamic connectivity," using fast pore-scale X-ray imaging. We image the flow of N2 and brine through a permeable sandstone at subsurface reservoir conditions, and low capillary numbers, and at constant fluid saturation. At any instant, the network of pores filled with the nonwetting phase is not necessarily connected. Flow occurs along pathways that periodically reconnect, like cars controlled by traffic lights. This behavior is consistent with an energy balance, where some of the energy of the injected fluids is sporadically converted to create new interfaces.

| S-EPMC5547607 | biostudies-literature

Extending a Gray Lattice Boltzmann Model for Simulating Fluid Flow in Multi-Scale Porous Media.

Project description:A gray lattice Boltzmann model has previously been developed by the authors of this article to simulate fluid flow in porous media that contain both resolved pores and grains as well as aggregates of unresolved smaller pores and grains. In this model, a single parameter is introduced to prescribe the amount of fluid to be bounced back at each aggregate cell. This model has been shown to recover Darcy-Brinkman flow but with effective viscosity and permeability correlated through the model parameter. In this paper, we prove that the model parameter relates to the fraction of the solid phase of a sub-pore system for a specific set of bounce-back conditions. We introduce an additional parameter to the model, and this enables flow simulation in which cases with variable effective viscosity and permeability can be specified by selecting the two parameters independently. We verify and validate the model for layered channel cases and mathematically analyze fluid momentum and energy losses for the single- and two-parameter models to explain the roles of the parameters in their conservation. We introduce a strategy to upgrade our model to an isotropic version. We discuss the fundamental differences between our model and the Brinkman body-force LBM scheme.

| S-EPMC5895624 | biostudies-literature

Velocity dependent up-winding scheme for node control volume finite element method for fluid flow in porous media.

Project description:We present a novel velocity based up-winding scheme for the node control volume finite element (NCVFE) method. The NCVFE method solves for the pressure at the vertices of elements and a control volume mesh is constructed around them; where the advection of fluids is modelled. Therefore, each element shares several control volumes, and traditionally the fluid saturations used in calculating the mobilities over each element - hence updating pressure - are arithmetically weighted. In this paper, we use the velocity vector to allocate the upstream direction of the fluid flow in each element and use the upstream fluid saturation in calculating the mobility needed for the pressure equation. We test his novel approach using triangle and tetrahedron elements, and we show that it produces more accurate fluid saturation profiles than the traditional approach. The method can easily be implemented in current NCVFE simulators.

| S-EPMC7064500 | biostudies-literature

Dynamics of fluid displacement in mixed-wet porous media.

Project description:We identify a distinct two-phase flow invasion pattern in a mixed-wet porous medium. Time-resolved high-resolution synchrotron X-ray imaging is used to study the invasion of water through a small rock sample filled with oil, characterized by a wide non-uniform distribution of local contact angles both above and below 90°. The water advances in a connected front, but throats are not invaded in decreasing order of size, as predicted by invasion percolation theory for uniformly hydrophobic systems. Instead, we observe pinning of the three-phase contact between the fluids and the solid, manifested as contact angle hysteresis, which prevents snap-off and interface retraction. In the absence of viscous dissipation, we use an energy balance to find an effective, thermodynamic, contact angle for displacement and show that this angle increases during the displacement. Displacement occurs when the local contact angles overcome the advancing contact angles at a pinned interface: it is wettability which controls the filling sequence. The product of the principal interfacial curvatures, the Gaussian curvature, is negative, implying well-connected phases which is consistent with pinning at the contact line while providing a topological explanation for the high displacement efficiencies in mixed-wet media.

| S-EPMC7482207 | biostudies-literature

Transport of GenX in Saturated and Unsaturated Porous Media.

Project description:The objective of this research was to investigate the retention and transport behavior of GenX in five natural porous media with similar median grain diameters but different geochemical properties. Surface tensions were measured to characterize surface activity. Miscible-displacement experiments were conducted under saturated conditions to characterize the magnitude of solid-phase adsorption, while unsaturated-flow experiments were conducted to examine the impact of air-water interfacial adsorption on retention and transport. The results from surface-tension measurements showed that the impact of solution composition is greater for the ammonium form of GenX than for the acid form, due to the presence of the NH4 counterion. The breakthrough curves for the experiments conducted under saturated conditions were asymmetrical, and a solute-transport model employing a two-domain representation of nonlinear, rate-limited sorption provided reasonable simulations of the measured data. The magnitudes of solid-phase adsorption were relatively small, with the highest adsorption associated with the medium containing the greatest amount of metal oxides. The breakthrough curves for the experiments conducted under unsaturated conditions exhibited greater retardation due to the impact of adsorption at the air-water interface. The contributions of air-water interfacial adsorption to GenX retention ranged from ∼24% to ∼100%. The overall magnitudes of retardation were relatively low, with retardation factors < ∼3, indicating that GenX has significant migration potential in soil and the vadose zone. To our knowledge, the results presented herein represent the first reported data for solid-water and air-water interfacial adsorption of GenX by soil. These data should prove useful for assessing the transport and fate behavior of GenX in soil and groundwater.

| S-EPMC7654438 | biostudies-literature

Elastic turbulence generates anomalous flow resistance in porous media

Project description:Description Microscopy reveals that polymers cause chaotic flow fluctuations in a porous medium, increasing macroscopic flow resistance. Many energy, environmental, industrial, and microfluidic processes rely on the flow of polymer solutions through porous media. Unexpectedly, the macroscopic flow resistance often increases above a threshold flow rate in a porous medium, but not in bulk solution. The reason why has been a puzzle for over half a century. Here, by directly visualizing flow in a transparent 3D porous medium, we demonstrate that this anomalous increase is due to the onset of an elastic instability in which the flow exhibits strong spatiotemporal fluctuations reminiscent of inertial turbulence, despite the small Reynolds number. Our measurements enable us to quantitatively establish that the energy dissipated by pore-scale fluctuations generates the anomalous increase in the overall flow resistance. Because the macroscopic resistance is one of the most fundamental descriptors of fluid flow, our results both help deepen understanding of complex fluid flows and provide guidelines to inform a broad range of applications.

| S-EPMC8570596 | biostudies-literature

Transport pathways and kinetics of cerebrospinal fluid tracers in mouse brain observed by dynamic contrast-enhanced MRI.

Project description:Recent studies have suggested the glymphatic system as a key mechanism of waste removal in the brain. Dynamic contrast-enhanced MRI (DCE-MRI) using intracisternally administered contrast agents is a promising tool for assessing glymphatic function in the whole brain. In this study, we evaluated the transport kinetics and distribution of three MRI contrast agents with vastly different molecular sizes in mice. Our results demonstrate that oxygen-17 enriched water (H217O), which has direct access to parenchymal tissues via aquaporin-4 water channels, exhibited significantly faster and more extensive transport compared to the two gadolinium-based contrast agents (Gd-DTPA and GadoSpin). Time-lagged correlation and clustering analyses also revealed different transport pathways for Gd-DTPA and H217O. Furthermore, there were significant differences in transport kinetics of the three contrast agents to the lateral ventricles, reflecting the differences in forces that drive solute transport in the brain. These findings suggest the size-dependent transport pathways and kinetics of intracisternally administered contrast agents and the potential of DCE-MRI for assessing multiple aspects of solute transport in the glymphatic system.

| S-EPMC10449788 | biostudies-literature

Solute transport across a contact interface in deformable porous media.

Project description:A finite element formulation of neutral solute transport across a contact interface between deformable porous media is implemented and validated against analytical solutions. By reducing the integral statements of external virtual work on the two contacting surfaces into a single contact integral, the algorithm automatically enforces continuity of solute molar flux across the contact interface, whereas continuity of the effective solute concentration (a measure of the solute mechano-chemical potential) is achieved using a penalty method. This novel formulation facilitates the analysis of problems in biomechanics where the transport of metabolites across contact interfaces of deformable tissues may be of interest. This contact algorithm is the first to address solute transport across deformable interfaces, and is made available in the public domain, open-source finite element code FEBio (http://www.febio.org).

| S-EPMC3351088 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data