Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Microscopic Study of the Spinodal Decomposition of Supported Eutectic Droplets During Cooling: PtGe/Ge{110}.

ABSTRACT: We embarked on an in situ low-energy electron microscopy, photo-electron emission microscopy, and selected area low-energy electron diffraction study during the cooling of huge eutectic droplets through the critical stages of the eutectic transition. On this journey through uncharted waters, we revealed an expected initial shrinking of the exposed area of the droplet, followed by an unanticipated expansion. We attribute this behavior to an initial fast amorphization of the interface between the droplet and surface, followed by the recrystallization of Ge expelled from the droplet at the interface. As a major surprise, we discovered the emergence of extensive "spaghetti"-like patterns, which are rationalized in terms of parallel Ge ripples oriented along, mainly, [-554] and [-55-4] directions. They emerge during spinodal decomposition when passing the eutectic temperature of the system. Their sides are defined by Ge{111} and Ge{11-1} vicinals covered with Pt-modified (√3 × √3) superstructures. The distance between adjacent ripples is about 18 nm.

SUBMITTER: Zhang Z

PROVIDER: S-EPMC9289948 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Formation of metastable phases by spinodal decomposition.

Project description:Metastable phases may be spontaneously formed from other metastable phases through nucleation. Here we demonstrate the spontaneous formation of a metastable phase from an unstable equilibrium by spinodal decomposition, which leads to a transient coexistence of stable and metastable phases. This phenomenon is generic within the recently introduced scenario of the landscape-inversion phase transitions, which we experimentally realize as a structural transition in a colloidal crystal. This transition exhibits a rich repertoire of new phase-ordering phenomena, including the coexistence of two equilibrium phases connected by two physically different interfaces. In addition, this scenario enables the control of sizes and lifetimes of metastable domains. Our findings open a new setting that broadens the fundamental understanding of phase-ordering kinetics, and yield new prospects of applications in materials science.

| S-EPMC5059762 | biostudies-literature

Direct observation of spinodal decomposition phenomena in InAlN alloys during in-situ STEM heating.

Project description:The spinodal decomposition and thermal stability of thin In0.72Al0.28N layers and In0.72Al0.28N/AlN superlattices with AlN(0001) templates on Al2O3(0001) substrates was investigated by in-situ heating up to 900 °C. The thermally activated structural and chemical evolution was investigated in both plan-view and cross-sectional geometries by scanning transmission electron microscopy in combination with valence electron energy loss spectroscopy. The plan-view observations demonstrate evidence for spinodal decomposition of metastable In0.72Al0.28N after heating at 600 °C for 1 h. During heating compositional modulations in the range of 2-3 nm-size domains are formed, which coarsen with applied thermal budgets. Cross-sectional observations reveal that spinodal decomposition begin at interfaces and column boundaries, indicating that the spinodal decomposition has a surface-directed component.

| S-EPMC5349532 | biostudies-literature

Colloid-in-liquid crystal gels formed via spinodal decomposition.

Project description:We report that colloid-in-liquid crystal (CLC) gels can be formed via a two-step process that involves spinodal decomposition of a dispersion of colloidal particles in an isotropic phase of mesogens followed by nucleation of nematic domains within the colloidal network defined by the spinodal process. This pathway contrasts to previously reported routes leading to the formation of CLC gels, which have involved entanglement of defects or exclusion of particles from growing nematic domains. The new route provides the basis of simple design rules that enable control of the microstructure and dynamic mechanical properties of the gels.

| S-EPMC4212980 | biostudies-literature

Multi-nanolayered VO2/Sapphire Thin Film via Spinodal Decomposition.

Project description:Coating of VO2-based thin film has been extensively studied for fabricating energy-saving smart windows. One of the most efficient ways for fabricating high performance films is to create multi-nanolayered structure. However, it has been highly challenge to make such layers in the VO2-based films using conventional methods. In this work, a facile two-step approach is established to fabricate multilayered VO2-TiO2 thin films. We first deposited the amorphous thin films upon sputtering, and then anneal them to transform the amorphous phase into alternating Ti- and V-rich multilayered nanostructure via a spinodal decomposition mechanism. In particular, we take advantage of different sapphire substrate planes (A-plane (11-20), R-plane (1-102), C-plane (0001), and M-plane (10-10)) to achieve different decomposition modes. The new approach has made it possible to tailoring the microstructure of the thin films for optimized performances by controlling the disorder-order transition in terms of both kinetic and thermodynamic aspects. The derived thin films exhibit superior optical modulation upon phase transition, significantly reduced transition temperature and hysteresis loop width, and high degradation resistance, these improvements indicate a high potential to be used for fabricating the next generation of energy saving smart windows.

| S-EPMC5871865 | biostudies-other

Microstructural patterns with tunable mechanical anisotropy obtained by simulating anisotropic spinodal decomposition

Project description:The generation of mechanical metamaterials with tailored effective properties through carefully engineered microstructures requires avenues to predict optimal microstructural architectures. Phase separation in heterogeneous systems naturally produces complex microstructural patterns whose effective response depends on the underlying process of spinodal decomposition. During this process, anisotropy may arise due to advection, diffusive chemical gradients or crystallographic interface energy, leading to anisotropic patterns with strongly directional effective properties. We explore the link between anisotropic surface energies during spinodal decomposition, the resulting microstructures and, ultimately, the anisotropic elastic moduli of the resulting medium. We simulate the formation of anisotropic patterns within representative volume elements, using recently developed stabilized spectral techniques that circumvent further regularization, and present a powerful alternative to current numerical techniques. The interface morphology of representative phase-separated microstructures is shown to strongly depend on surface anisotropy. The effective elastic moduli of the thus-obtained porous media are identified by periodic homogenization, and directionality is demonstrated through elastic surfaces. Our approach not only improves upon numerical tools to simulate phase separation; it also offers an avenue to generate tailored microstructures with tunable resulting elastic anisotropy.

| S-EPMC6237504 | biostudies-literature

Magnetic-field-induced phase separation via spinodal decomposition in epitaxial manganese ferrite thin films.

Project description:In this study, we report about the occurrence of phase separation through spinodal decomposition (SD) in spinel manganese ferrite (Mn ferrite) thin films grown by Dynamic Aurora pulsed laser deposition. The driving force behind this SD in Mn ferrite films is considered to be an ion-impingement-enhanced diffusion that is induced by the application of magnetic field during film growth. The phase separation to Mn-rich and Fe-rich phases in Mn ferrite films is confirmed from the Bragg's peak splitting and the appearance of the patterned checkerboard-like domain in the surface. In the cross-sectional microstructure analysis, the distribution of Mn and Fe-signals alternately changes along the lateral (x and y) directions, while it is almost homogeneous in the z-direction. The result suggests that columnar-type phase separation occurs by the up-hill diffusion only along the in-plane directions. The propagation of a quasi-sinusoidal compositional wave in the lateral directions is confirmed from spatially resolved chemical composition analysis, which strongly demonstrates the occurrence of phase separation via SD. It is also found that the composition of Mn-rich and Fe-rich phases in phase-separated Mn ferrite thin films deposited at higher growth temperature and in situ magnetic field does not depend on the corresponding average film composition.

| S-EPMC6041787 | biostudies-literature

From spinodal decomposition to alternating layered structure within single crystals of biogenic magnesium calcite.

Project description:As organisms can form crystals only under ambient conditions, they demonstrate fascinating strategies to overcome this limitation. Recently, we reported a previously unknown biostrategy for toughening brittle calcite crystals, using coherently incorporated Mg-rich nanoprecipitates arranged in a layered manner in the lenses of a brittle star, Ophiocoma wendtii. Here we propose the mechanisms of formation of this functional hierarchical structure under conditions of ambient temperature and limited solid diffusion. We propose that formation proceeds via a spinodal decomposition of a liquid or gel-like magnesium amorphous calcium carbonate (Mg-ACC) precursor into Mg-rich nanoparticles and a Mg-depleted amorphous matrix. In a second step, crystallization of the decomposed amorphous precursor leads to the formation of high-Mg particle-rich layers. The model is supported by our experimental results in synthetic systems. These insights have significant implications for fundamental understanding of the role of Mg-ACC material transformation during crystallization and its subsequent stability.

| S-EPMC6783414 | biostudies-literature

Self-reduction of the native TiO2 (110) surface during cooling after thermal annealing - in-operando investigations.

Project description:We investigate the thermal reduction of TiO2 in ultra-high vacuum. Contrary to what is usually assumed, we observe that the maximal surface reduction occurs not during the heating, but during the cooling of the sample back to room temperature. We describe the self-reduction, which occurs as a result of differences in the energies of defect formation in the bulk and surface regions. The findings presented are based on X-ray photoelectron spectroscopy carried out in-operando during the heating and cooling steps. The presented conclusions, concerning the course of redox processes, are especially important when considering oxides for resistive switching and neuromorphic applications and also when describing the mechanisms related to the basics of operation of solid oxide fuel cells.

| S-EPMC6715630 | biostudies-other

Boosting Hole Mobility in Coherently Strained [110]-Oriented Ge-Si Core-Shell Nanowires.

Project description:The ability of core-shell nanowires to overcome existing limitations of heterostructures is one of the key ingredients for the design of next generation devices. This requires a detailed understanding of the mechanism for strain relaxation in these systems in order to eliminate strain-induced defect formation and thus to boost important electronic properties such as carrier mobility. Here we demonstrate how the hole mobility of [110]-oriented Ge-Si core-shell nanowires can be substantially enhanced thanks to the realization of large band offset and coherent strain in the system, reaching values as high as 4200 cm2/(Vs) at 4 K and 1600 cm2/(Vs) at room temperature for high hole densities of 1019 cm-3. We present a direct correlation of (i) mobility, (ii) crystal direction, (iii) diameter, and (iv) coherent strain, all of which are extracted in our work for individual nanowires. Our results imply [110]-oriented Ge-Si core-shell nanowires as a promising candidate for future electronic and quantum transport devices.

| S-EPMC5391496 | biostudies-literature

Symmetry constraints during the development of anisotropic spinodal patterns.

Project description:Spinodal decomposition is a phase-separation phenomenon occurring at non-equilibrium conditions. In isotropic materials, it is expected to improve the physical properties, in which modulated structures arise from a single system of spinodal waves. However, in anisotropic materials this process is controversial and not very well understood. Here, we report anisotropic spinodal decomposition patterns in single crystals of K-rich feldspar with macroscopic monoclinic 2/m symmetry. The periodicity of the spinodal waves at ~450 nm produces a blue iridescence, typical of the gemstone moonstone. Stripe patterns in the (010) plane, labyrinthine patterns in the (100) plane, and coexistence of the two patterns in the (110) plane are first resolved by scanning Rayleigh scattering microscopy. Two orthogonal systems of spinodal waves with the same periodicity are derived from the features and orientations of the patterns on the crystal surfaces. The orthogonality of the waves is related to the perpendicularity of the binary axis and the mirror plane. Thus, the spinodal patterns must be controlled by symmetry constraints during phase separation at early stages. Unusual and new properties could be developed in other anisotropic materials by thermal treatment inducing two orthogonal systems of periodic spinodal waves.

| S-EPMC4748404 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data