Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrified Conversion of Contaminated Water to Value: Selective Conversion of Aqueous Nitrate to Ammonia in a Polymer Electrolyte Membrane Cell.

ABSTRACT: The application of a polymer electrolyte membrane (PEM) electrolytic cell for continuous conversion of nitrate, one of the contaminants in water, to ammonia at the cathode was explored in the present work. Among carbon-supported metal (Cu, Ru, Rh and Pd) electrocatalysts, the Ru-based catalyst showed the best performance. By suppressing the competing hydrogen evolution reaction at the cathode, it was possible to reach 94 % faradaic efficiency for nitrate reduction towards ammonium. It was important to match the rate of the anodic reaction with the cathodic reaction to achieve high faradaic efficiency. By recirculating the effluent stream, 93 % nitrate conversion was achieved in 8 h of constant current electrolysis at 10 mA cm^-2 current density. The presented approach offers a promising path towards precious NH₃ production from nitrate-containing water that needs purification or can be obtained after capture of gaseous NO_x pollutants into water, leading to waste-to-value conversion.

SUBMITTER: Bunea S

PROVIDER: S-EPMC9300064 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Lanthanum nitrate as aqueous electrolyte additive for favourable zinc metal electrodeposition.

Project description:Aqueous zinc batteries are appealing devices for cost-effective and environmentally sustainable energy storage. However, the zinc metal deposition at the anode strongly influences the battery cycle life and performance. To circumvent this issue, here we propose the use of lanthanum nitrate (La(NO3)3) as supporting salt for aqueous zinc sulfate (ZnSO4) electrolyte solutions. Via physicochemical and electrochemical characterizations, we demonstrate that this peculiar electrolyte formulation weakens the electric double layer repulsive force, thus, favouring dense metallic zinc deposits and regulating the charge distribution at the zinc metal|electrolyte interface. When tested in Zn||VS2 full coin cell configuration (with cathode mass loading of 16 mg cm-2), the electrolyte solution containing the lanthanum ions enables almost 1000 cycles at 1 A g-1 (after 5 activation cycles at 0.05 A g-1) with a stable discharge capacity of about 90 mAh g-1 and an average cell discharge voltage of ∼0.54 V.

| S-EPMC9170708 | biostudies-literature

Lignin-Based Polymer Electrolyte Membranes for Sustainable Aqueous Dye-Sensitized Solar Cells.

Project description:In the quest for sustainable materials for quasi-solid-state (QS) electrolytes in aqueous dye-sensitized solar cells (DSSCs), novel bioderived polymeric membranes were prepared in this work by reaction of preoxidized kraft lignin with poly(ethylene glycol)diglycidylether (PEGDGE). The effect of the PEGDGE/lignin relative proportions on the characteristics of the obtained membranes was thoroughly investigated, and clear structure-property correlations were highlighted. In particular, the glass transition temperature of the materials was found to decrease by increasing the amount of PEGDGE in the formulation, indicating that polyethylene glycol chains act as flexible segments that increase the molecular mobility of the three-dimensional polymeric network. Concurrently, their swelling ability in liquid electrolyte was found to increase with the concentration of PEGDGE, which was also shown to influence the ionic transport efficiency within the membrane. The incorporation of these lignin-based cross-linked systems as QS electrolyte frameworks in aqueous DSSCs allowed the preparation of devices with excellent long-term stability under UV-vis light, which were found to be superior to benchmark QS-DSSCs incorporating state-of-the-art carboxymethylcellulose membranes. This study provides the first demonstration of lignin-based QS electrolytes for stable aqueous DSSCs, establishing a straightforward strategy to exploit the potential of lignin as a functional polymer precursor for the field of sustainable photovoltaic devices.

| S-EPMC8243320 | biostudies-literature

Origin of Asymmetric Electric Double Layers at Electrified Oxide/Electrolyte Interfaces.

Project description:The structure of electric double layers (EDLs) dictates the chemistry and the physics of electrified interfaces, and the differential capacitance is the key property for characterizing EDLs. Here we develop a theoretical model for computing the differential Helmholtz capacitance CH of oxide-electrolyte interfaces using density functional theory-based finite-field molecular dynamics simulations. It is found that the dipole of interfacial adsorbed groups (i.e., water molecule, hydroxyl ion, and proton) at the electrified SnO2(110)/NaCl interfaces significantly modulates the double layer potential which leads to the asymmetric distribution of CH. We also find that the dissociative water adsorption prefers the inner sphere binding of counterions, which in turn leads to a higher Helmholtz capacitance, compared with that of the nondissociative case at the interface. This work provides a molecular interpretation of asymmetric EDLs seen experimentally in a range of metal oxides/hydroxides.

| S-EPMC8154876 | biostudies-literature

Sustainable conversion of alkaline nitrate to ammonia at activities greater than 2 A cm<sup>-2</sup>.

Project description:Nitrate (NO3‒) pollution poses significant threats to water quality and global nitrogen cycles. Alkaline electrocatalytic NO3‒ reduction reaction (NO3RR) emerges as an attractive route for enabling NO3‒ removal and sustainable ammonia (NH3) synthesis. However, it suffers from insufficient proton (H+) supply in high pH conditions, restricting NO3‒-to-NH3 activity. Herein, we propose a halogen-mediated H+ feeding strategy to enhance the alkaline NO3RR performance. Our platform achieves near-100% NH3 Faradaic efficiency (pH = 14) with a current density of 2 A cm-2 and enables an over 99% NO3--to-NH3 conversion efficiency. We also convert NO3‒ to high-purity NH4Cl with near-unity efficiency, suggesting a practical approach to valorizing pollutants into valuable ammonia products. Theoretical simulations and in situ experiments reveal that Cl-coordination endows a shifted d-band center of Pd atoms to construct local H+-abundant environments, through arousing dangling O-H water dissociation and fast *H desorption, for *NO intermediate hydrogenation and finally effective NO3‒-to-NH3 conversion.

| S-EPMC10858923 | biostudies-literature

Selective nitrate removal from aqueous solutions by a hydrotalcite-like absorbent FeMgMn-LDH.

Project description:FeMgMn-LDH, a type of potential environmental remediation material, has been synthesized via a co-precipitation method, and its adsorption characteristics for nitrate were investigated in this study. It's shown that the prepared FeMgMn-LDH is a promising adsorbent for anions removal, which has high buffer capacity (final pH remained between 9 and 10) and high reversibility, and can remove nitrate ions selectively though an anion-sieve effect. The maximum amount of nitrate adsorption is 10.56 N-mg g-1 at 25 ℃. The removal rate of nitrate ions can reach 86.26% with the adsorbent dose of 5 g/L in a real water. The competition order of coexisting anions on nitrate adsorption by FeMgMn-LDH is CO32- > PO43- > SO42-. The negative values of ΔG0 (from - 27.796 to - 26.426 kJ mol-1) and ΔH0 (- 6.678 kJ mol-1) indicate that the nitrate adsorption process on the FeMgMn-LDH is spontaneous and exothermic. The main adsorption mechanisms of nitrate removal from aqueous solutions by FeMgMn-LDH are electrostatic attraction and ion exchange.

| S-EPMC7528107 | biostudies-literature

Reduced Faradaic Contributions and Fast Charging of Nanoporous Carbon Electrodes in a Concentrated Sodium Nitrate Aqueous Electrolyte for Supercapacitors.

Project description:The Faradaic processes related to electrochemical water reduction at the nanoporous carbon electrode under negative polarization are reduced when the concentration of aqueous sodium nitrate (NaNO3) is increased or the temperature is decreased. This effect enhances the relative contribution of ion electrosorption to the total charge storage process. Hydrogen chemisorption is reduced in aqueous 8.0?m NaNO3 due to the low degree of hydration of the Na+ cation; consequently, less free water is available for redox contributions, driving the system to exhibit electrical double-layer capacitive characteristics. Hydrogen adsorption/desorption is facilitated in 1.0?m NaNO3 due to the high molar ratio. The excess of water shifts the local pH in carbon nanopores to neutral values, giving rise to a high overpotential for dihydrogen evolution in the latter. The dilution effect on local pH shift in 1.0?m NaNO3 can be reduced by decreasing the temperature. A symmetric activated carbon cell assembled with 8.0?m NaNO3 exhibits a high capacitance and coulombic efficiency, a larger contribution of ion electrosorption to the overall charge storage process, and a stable capacitance performance at 1.6?V.

| S-EPMC6774286 | biostudies-literature

Interlayer Engineering of ?-MoO<sub>3</sub> Modulates Selective Hydronium Intercalation in Neutral Aqueous Electrolyte.

Project description:Among various charge-carrier ions for aqueous batteries, non-metal hydronium (H3 O+ ) with small ionic size and fast diffusion kinetics empowers H3 O+ -intercalation electrodes with high rate performance and fast-charging capability. However, pure H3 O+ charge carriers for inorganic electrode materials have only been observed in corrosive acidic electrolytes, rather than in mild neutral electrolytes. Herein, we report how selective H3 O+ intercalation in a neutral ZnCl2 electrolyte can be achieved for water-proton co-intercalated ?-MoO3 (denoted WP-MoO3 ). H2 O molecules located between MoO3 interlayers block Zn2+ intercalation pathways while allowing smooth H3 O+ intercalation/diffusion through a Grotthuss proton-conduction mechanism. Compared to ?-MoO3 with a Zn2+ -intercalation mechanism, WP-MoO3 delivers the substantially enhanced specific capacity (356.8 vs. 184.0?mA?h?g-1 ), rate capability (77.5?% vs. 42.2?% from 0.4 to 4.8?A?g-1 ), and cycling stability (83?% vs. 13?% over 1000?cycles). This work demonstrates the possibility of modulating electrochemical intercalating ions by interlayer engineering, to construct high-rate and long-life electrodes for aqueous batteries.

| S-EPMC7839748 | biostudies-literature

Methods to identify saline-contaminated electrolyte profiles.

Project description:With providers becoming more selective in ordering daily chemistry profiles, it is critical that profiles ordered are accurate. Contaminated electrolyte profiles are an overlooked and potentially dangerous source of inaccurate clinical data. This study aimed to develop a method to accurately identify electrolyte profiles contaminated with normal saline to prevent reporting of erroneous measurements.We conducted a retrospective cohort study of 76,497 electrolyte profiles from 5032 patients in a deidentified clinical database of all patients in the electronic medical record at Vanderbilt University Medical Center. Five methods to identify errors in quantification based on either deviations from observed concentration distributions or expected numerical changes from saline contamination were developed and tested. Potentially contaminated measurements were validated based on changes in electrolyte concentrations observed in the subsequent sample.Identification of erroneous electrolyte profiles based on absolute and percent deviations from normal variation rarely resulted in >50% of identified samples validated as contaminated. A targeted methodology based on expected changes in calcium and chloride concentrations due to saline contamination validated approximately 80% of identified samples when higher thresholds for changes in electrolyte concentration were used and 50% of identified samples when lower thresholds were used.Targeted methodology based on changes in chloride and calcium successfully identified electrolyte profiles suspicious for contamination. Implementation of this methodology could prevent misinterpretation of a patient's clinical course, inappropriate interventions, and unwarranted changes in treatment strategy.

| S-EPMC4544643 | biostudies-literature

Quantitative determination of rapid biomass formation on pyro-electrified polymer sheets.

Project description:The ability of a bacterial strain to form a biofilm is strictly related to its pathogenicity. Bacterial adherence and early biofilm formation are influenced by chemical, physical and biological factors that determine their pathogenic properties. We recently presented in literature the ability of pyro-electrified polymer sheets to promote rapid biofilm formation, based on what we called biofilm electrostatic test (BET) carriers. Here we performed a step forward by presenting a comprehensive characterization of the BET methodology through a quantitative evaluation of the biomass on the BET-carrier in the very early stages of incubation. Two bacterial suspensions of Escherichia coli were added to the surface of the BET-carrier, with one order of magnitude difference in initial optical density. The biofilms were stained at different incubation times, while the crystal violet assay and the live/dead reaction kit were used for evaluating the biomass and the viability, respectively. The BET-carrier systematically promoted a faster biofilm formation even in case of very diluted bacterial concentration. The results suggest that the BET-carrier could be used for evaluating rapidly the ability of bacteria to form biofilms and thus their inclination to pathogenicity, thanks to the challenging acceleration in biofilm formation.

| S-EPMC7798477 | biostudies-literature

Development of the PANI/MWCNT Nanocomposite-Based Fluorescent Sensor for Selective Detection of Aqueous Ammonia.

Project description:The present work reported the polyaniline (PANI) and multiwalled carbon nanotube (MWCNT)-based nanocomposite as a sensing material for the determination of aqueous ammonia by the enhanced fluorescence method. The excitation wavelength-dependent photoluminescence (PL) intensity has shown dual emission peaks at 340 and 380 nm that correspond to two different excitation energy states. The pH-based PL intensity and zeta potential variation were analyzed to optimize the suitable medium for aqueous ammonia sensing. Zeta potential was found to shift from 4 to -21 mV upon changing the pH of the the solution from acidic to alkaline medium. The fluorescence intensity of PANI/MWCNTs was found to increase upon increasing the pH from 3.0 to 6.0 (acidic region) and exhibits a plateau upon further increasing the pH from 7.0 to 12 (basic region). The PANI/MWCNT composite has shown a linear response to aqueous ammonia concentration varying from 25 to 200 ?M with a correlation coefficient (R 2) of 0.99 and a limit of detection of 15.19 ?M. The presence of relevant interference molecules and physiological ions had no influence on the detection of aqueous ammonia. Field-level study demonstrated that the level of aqueous ammonia can be determined selectively by using the PANI/MWCNT composite for various applications. The mechanism for the selective detection of aqueous ammonia is deliberated in detail.

| S-EPMC7178370 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data