Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tailoring thermal insulation architectures from additive manufacturing.

ABSTRACT: Tailoring thermal transport by structural parameters could result in mechanically fragile and brittle networks. An indispensable goal is to design hierarchical architecture materials that combine thermal and mechanical properties in a continuous and cohesive network. A promising strategy to create such a hierarchical network targets additive manufacturing of hybrid porous voxels at nanoscale. Here we describe the convergence of agile additive manufacturing of porous hybrid voxels to tailor hierarchically and mechanically tunable objects. In one strategy, the uniformly distributed porous silica voxels, which form the basis for the control of thermal transport, are non-covalently interfaced with polymeric networks, yielding hierarchic super-elastic architectures with thermal insulation properties. Another additive strategy for achieving mechanical strength involves the versatile orthogonal surface hybridization of porous silica voxels retains its low thermal conductivity of 19.1 mW m^-1K^-1, flexible compressive recovery strain (85%), and tailored mechanical strength from 71.6 kPa to 1.5 MPa. The printed lightweight high-fidelity objects promise thermal aging mitigation for lithium-ion batteries, providing a thermal management pathway using 3D printed silica objects.

SUBMITTER: An L

PROVIDER: S-EPMC9314391 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhancing Thermal Insulation of EPDM Ablators via Constructing Alternating Planar Architectures.

Project description:Ethylene-propylene-diene monomer (EPDM) composites were usually enhanced with ablative additives to protect solid rocket motor (SRMs) casings. However, the poor thermal insulation caused by the high thermal conductive ablative fillers can lead to rocket motor failure. Herein, the novel EPDM composites containing alternating layers of ablative EPDM (AM) and heat-insulated EPDM (HM) were prepared through layer-multiplying extrusion. Compared with conventional EPDM ablative material, the multilayer composites showed enhanced thermal insulation and mechanical properties that could be further improved by tuning the number of layers. The ablation and thermal insulation properties possessing in AM and HM layers could be combined by forced assembly during co-extrusion, and the alternating multilayer composite was capable of showing the effect of each component. In particular, compared with AM, the maximum back-face temperature with 40 alternating layers of AM/HM decreased from 96.2 °C to 75.6 °C during oxyacetylene test, while the good ablation properties were preserved in the AM component. This significant improvement was attributed to the planar orientation and densification of ablative additives, and the interruption of conductive pathways in the through-plane direction of AM/HM alternating laminate. The anisotropic EPDM composites featuring mechanical robustness, good ablative resistance and thermal insulation suggest considerable potential application in the aerospace industry.

| S-EPMC9028349 | biostudies-literature

Additive manufacturing of eco-friendly building insulation materials by recycling pulp and paper.

Project description:Thermal insulation materials by recycling pulp and paper wastes play an important role in environmental sustainability of green buildings. As society is pursuing the goal of zero carbon emissions, it is highly desirable to use eco-friendly materials and manufacturing technologies for building insulation envelopes. Here we report additive manufacturing of flexible and hydrophobic insulation composites from recycled cellulose-based fibers and silica aerogel. The resultant cellulose-aerogel composites exhibit thermal conductivity of 34.68 mW m-1 K-1, mechanical flexibility with a flexural modulus of 429.21 MPa, and superhydrophobicity with water contact angle of 158.72°. Moreover, we present the additive manufacturing process of recycled cellulose aerogel composites, providing enormous potential for high energy efficiency and carbon-sequestration building applications.

| S-EPMC10153082 | biostudies-literature

Multi-Stage Thermal Modelling of Extrusion-Based Polymer Additive Manufacturing.

Project description:Additive manufacturing is one the most promising fabrication strategies for the fabrication of bone tissue scaffolds using biodegradable semi-crystalline polymers. During the fabrication process, polymeric material in a molten state is deposited in a platform and starts to solidify while cooling down. The build-up of consecutive layers reheats the previously deposited material, introducing a complex thermal cycle with impacts on the overall properties of printed scaffolds. Therefore, the accurate prediction of these thermal cycles is significantly important to properly design the additively manufactured polymer scaffolds and the bonding between the layers. This paper presents a novel multi-stage numerical model, integrating a 2D representation of the dynamic deposition process and a 3D thermal evolution model to simulate the fabrication process. Numerical simulations show how the deposition velocity controls the spatial dimensions of the individual deposition layers and the cooling process when consecutive layers are deposited during polymer printing. Moreover, numerical results show a good agreement with experimental results.

| S-EPMC9966975 | biostudies-literature

Dynamical Mechanical and Thermal Analyses of Biodegradable Raw Materials for Additive Manufacturing.

Project description:In order to find new ways to ensure sustainable development on a global level, it is essential to combine current top technologies, such as additive manufacturing, with the economic, ecological, and social fields. One objective of this paper refers to wire manufacture such as Arboblend V2 Nature, Arbofill Fichte, and Arboblend V2 Nature reinforced with Extrudr BDP "Pearl" (BDP-Biodegradable Plastic) in order to replace the plastic materials. After wire manufacture by extrusion, the diameter accuracy was analyzed compared with the Fiber Wood wire using SEM analyses and also EDAX-Energy Dispersive X-ray Analysis and DSC-Differential Scanning Calorimetry analyses were done in order to identify their elemental composition and the phase transitions suffered by the materials during heating. Using the samples obtained through the Fused Deposition Modeling (FDM) method, both crystalline phases and chemical composition information (XRD analysis) were identified, as well was determined the visco-elastic behavior Dynamic Mechanical Analysis (DMA), for the reinforced material and Fiber Wood. The extruded wires have allowed size for the printing equipment, around 1.75 mm with tolerance of ± 0.05 mm. The wire material diagrams, Arboblend V2 Nature reinforced with Extrudr BDP "Pearl" and Fiber Wood following the calorimetric analysis, presented peaks corresponding to material crystallization, while Arbofill Fichte revealed only the melting temperature. The storage module was almost double in case of Arboblend V2 Nature reinforced with Extrudr BDP "Pearl" compared with Fiber Wood and materials' melting temperatures were confirmed by the analyses carried out.

| S-EPMC7215505 | biostudies-literature

Beamless Metal Additive Manufacturing.

Project description:The propensity to manufacture functional and geometrically sophisticated parts from a wide range of metals provides the metal additive manufacturing (AM) processes superior advantages over traditional methods. The field of metal AM is currently dominated by beam-based technologies such as selective laser sintering (SLM) or electron beam melting (EBM) which have some limitations such as high production cost, residual stress and anisotropic mechanical properties induced by melting of metal powders followed by rapid solidification. So, there exist a significant gap between industrial production requirements and the qualities offered by well-established beam-based AM technologies. Therefore, beamless metal AM techniques (known as non-beam metal AM) have gained increasing attention in recent years as they have been found to be able to fill the gap and bring new possibilities. There exist a number of beamless processes with distinctively various characteristics that are either under development or already available on the market. Since this is a very promising field and there is currently no high-quality review on this topic yet, this paper aims to review the key beamless processes and their latest developments.

| S-EPMC7079600 | biostudies-literature

Deconvolution volumetric additive manufacturing.

Project description:Volumetric additive manufacturing techniques are a promising pathway to ultra-rapid light-based 3D fabrication. Their widespread adoption, however, demands significant improvement in print fidelity. Currently, volumetric additive manufacturing prints suffer from systematic undercuring of fine features, making it impossible to print objects containing a wide range of feature sizes, precluding effective adoption in many applications. Here, we uncover the reason for this limitation: light dose spread in the resin due to chemical diffusion and optical blurring, which becomes significant for features ⪅0.5 mm. We develop a model that quantitatively predicts the variation of print time with feature size and demonstrate a deconvolution method to correct for this error. This enables prints previously beyond the capabilities of volumetric additive manufacturing, such as a complex gyroid structure with variable thickness and a fine-toothed gear. These results position volumetric additive manufacturing as a mature 3D printing method, all but eliminating the gap to industry-standard print fidelity.

| S-EPMC10362001 | biostudies-literature

Strength and Performance Enhancement of Multilayers by Spatial Tailoring of Adherend Compliance and Morphology via Multimaterial Jetting Additive Manufacturing.

Project description:Material tailoring of bondlayer compliance is a known effective route to enhance performance of multilayers, and here spatial material-tailoring of compliance and morphology of the adherends is examined. Multimaterial jetting additive manufacturing (AM) allows us to realize for the first time compliance- and morphology-tailored adherends, and evaluate directly the mechanical performance, including failure, of the tensile-loaded multilayers. Adherend compliance-tailoring, unlike bondlayer tailoring, requires additional consideration due to adherend bending stiffness and moment influences on bondlayer stresses. We introduce anisotropic as well as layered/sandwich adherend tailoring to address this dependence. Numerical models show that for both sub-critical and critical bondlengths (at which shear-dominated load transfer occurs through the bondlayer), adherend tailoring reduces peak stresses significantly, particularly peel stress (reductions of 47-80%) that typically controls failure in such systems. At sub-critical bondlengths, the AM-enabled layered/sandwich adherend tailoring shows significantly increased experimental performance over the baseline multilayer: strength is increased by 20%, toughness by 48%, and strain-to-break by 18%, while retaining multilayer stiffness. The adherend tailoring demonstrated here adds to the techniques available to increase the performance of bonded multilayers, suggesting that adherend tailoring is particularly well-suited to additively manufactured multilayers, but can also have application in other areas such as layered electronics and advanced structural composite laminates.

| S-EPMC6134147 | biostudies-literature

Sub-surface thermal measurement in additive manufacturing via machine learning-enabled high-resolution fiber optic sensing.

Project description:Microstructures of additively manufactured metal parts are crucial since they determine the mechanical properties. The evolution of the microstructures during layer-wise printing is complex due to continuous re-melting and reheating effects. The current approach to studying this phenomenon relies on time-consuming numerical models such as finite element analysis due to the lack of effective sub-surface temperature measurement techniques. Attributed to the miniature footprint, chirped-fiber Bragg grating, a unique type of fiber optical sensor, has great potential to achieve this goal. However, using the traditional demodulation methods, its spatial resolution is limited to the millimeter level. In addition, embedding it during laser additive manufacturing is challenging since the sensor is fragile. This paper implements a machine learning-assisted approach to demodulate the optical signal to thermal distribution and significantly improve spatial resolution to 28.8 µm from the original millimeter level. A sensor embedding technique is also developed to minimize damage to the sensor and part while ensuring close contact. The case study demonstrates the excellent performance of the proposed sensor in measuring sharp thermal gradients and fast cooling rates during the laser powder bed fusion. The developed sensor has a promising potential to study the fundamental physics of metal additive manufacturing processes.

| S-EPMC11365934 | biostudies-literature

Surface tension-assisted additive manufacturing.

Project description:The proliferation of computer-aided design and additive manufacturing enables on-demand fabrication of complex, three-dimensional structures. However, combining the versatility of cell-laden hydrogels within the 3D printing process remains a challenge. Herein, we describe a facile and versatile method that integrates polymer networks (including hydrogels) with 3D-printed mechanical supports to fabricate multicomponent (bio)materials. The approach exploits surface tension to coat fenestrated surfaces with suspended liquid films that can be transformed into solid films. The operating parameters for the process are determined using a physical model, and complex geometric structures are successfully fabricated. We engineer, by tailoring the window geometry, scaffolds with anisotropic mechanical properties that compress longitudinally (~30% strain) without damaging the hydrogel coating. Finally, the process is amenable to high cell density encapsulation and co-culture. Viability (>95%) was maintained 28 days after encapsulation. This general approach can generate biocompatible, macroscale devices with structural integrity and anisotropic mechanical properties.

| S-EPMC5864961 | biostudies-literature

Detailed Thermal Characterization of Acrylonitrile Butadiene Styrene and Polylactic Acid Based Carbon Composites Used in Additive Manufacturing.

Project description:Currently, 3D printing is an affordable technology for industry, healthcare, and individuals. Understanding the mechanical properties and thermoplastic behaviour of the composites is critical for the users. Our results give guidance for certain target groups including professionals in the field of additive manufacturing for biomedical components with in-depth characterisation of the examined commercially available ABS and PLA carbon-based composites. The study aimed to characterize these materials in terms of thermal behaviour and structure. The result of the heating-cooling loops is the thermal hysteresis effect of Ohmic resistance with its accommodation property in the temperature range of 20-84 °C for ESD-ABS and 20-72 °C for ESD-PLA. DSC-TGA measurements showed that the carbon content of the examined ESD samples is ~10-20% (m/m) and there is no significant difference in the thermodynamic behaviour of the basic ABS/PLA samples and their ESD compounds within the temperature range typically used for 3D printing. The results support the detailed design process of 3D-printed electrical components and prove that ABS and PLA carbon composites are suitable for prototyping and the production of biomedical sensors.

| S-EPMC7764123 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data