Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Adsorption Characteristics and Mechanisms of Fe-Mn Oxide Modified Biochar for Pb(II) in Wastewater.

ABSTRACT: This study prepared iron-manganese oxide-modified biochar (FM-BC) by impregnating rice straw biochar (BC) with a mixed solution of ferric nitrate and potassium permanganate. The effects of pH, FM-BC dosage, interference of coexisting ions, adsorption time, incipient Pb(II) concentration, and temperature on the adsorption of Pb(II) by FM-BC were investigated. Moreover, the Pb(II) adsorption mechanism of FM-BC was analyzed using a series of characterization techniques. The results showed that the Fe-Mn oxide composite modification significantly promoted the physical and chemical functions of the biochar surface and the adsorption capacity of Pb(II). The specific surface area of FM-BC was 18.20 times larger than that of BC, and the maximum Pb(II) adsorption capacity reached 165.88 mg/g. Adsorption kinetic tests showed that the adsorption of Pb(II) by FM-BC was based on the pseudo-second-order kinetic model, which indicated that the adsorption process was mainly governed by chemical adsorption. The isothermal adsorption of Pb(II) by FM-BC conformed to the Langmuir model, indicating that the adsorption process was spontaneous and endothermic. Characterization analyses (Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy) showed that the adsorption mechanism of Pb(II) by FM-BC was mainly via electrostatic adsorption, chemical precipitation, complexation, ion exchange, and the transformation of Mn₂O₃ into MnO₂. Therefore, FM-BC is a promising adsorbent for Pb(II) removal from wastewater.

SUBMITTER: Tang SF

PROVIDER: S-EPMC9316531 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Removal of Cr(vi) in wastewater by Fe-Mn oxide loaded sludge biochar.

Project description:Sludge biochar loaded with Fe-Mn oxides (FMBC) was prepared and employed to remove Cr(vi) from wastewater. The influences of solution pH, co-existing ion, contact time, adsorption temperature and Cd(vi) concentrations on removing Cr(vi) by FMBC were investigated. The Cr(vi) adsorption on FMBC had strong pH dependence. Additionally, Na+, Mg2+, Ca2+, SiO32-, NO3- and Cl- ions exhibited no influence on Cr(vi) removal efficiency for FMBC, whereas there were inhibition effects of Pb2+, Cu2+, Ni2+, CO32-, SO42-, and PO43- on removing Cr(vi). The Cr(vi) adsorption from solution for FMBC was well described by models of pseudo-second-order and Langmuir, and the largest Cr(vi) removal capacity of FMBC reached 172.3 mg g-1. FMBC had good capacity for treating electroplating wastewater and mineral dissolving wastewater containing Cr(vi). After five regenerations, the 50 and 5 mg L-1 Cr(vi) removing efficiency of FMBC was 82.34% and 97.68%, respectively. The Cr(vi) removal for FMBC involved adsorption-reduction and re-adsorption of Cr(iii) generated by reduction. These results indicated that FMBC has good prospects for remediating Cr(vi)-containing wastewater.

| S-EPMC11009720 | biostudies-literature

Adsorption Characteristics of Dimethylated Arsenicals on Iron Oxide-Modified Rice Husk Biochar.

Project description:In this study, the adsorption characteristics of dimethylated arsenicals to rice husk biochar (BC) and Fe/biochar composite (FeBC) were assessed through isothermal adsorption experiments and X-ray absorption spectroscopy analysis. The maximal adsorption capacities (qm) of inorganic arsenate, calculated using the Langmuir isotherm equation, were 1.28 and 6.32 mg/g for BC and FeBC, respectively. Moreover, dimethylated arsenicals did not adsorb to BC at all, and in the case of FeBC, qm values of dimethylarsinic acid (DMA(V)), dimethylmonothioarsinic acid (DMMTA(V)), and dimethyldithioarsinic acid (DMDTA(V)) were calculated to be 7.08, 0.43, and 0.28 mg/g, respectively. This was due to the formation of iron oxide (i.e., two-line ferrihydrite) on the surface of BC. Linear combination fitting using As K-edge X-ray absorption near edge structure spectra confirmed that all chemical forms of dimethylated arsenicals adsorbed on the two-line ferrihydrite were DMA(V). Thus, FeBC could retain highly mobile and toxic arsenicals such as DMMTA(V) and DMDTA(V)) in the environment, and transform them into DMA(V) with relatively low toxicity.

| S-EPMC9692524 | biostudies-literature

Study on the dynamic adsorption and recycling of phosphorus by Fe-Mn oxide/mulberry branch biochar composite adsorbent.

Project description:In this study, the Fe-Mn oxide/mulberry stem biochar composite adsorbent (FM-MBC) was prepared and fully characterized by SEM-EDS, XRD, BET, and XPS. The solution pH (3.0, 4.5, and 6.0), initial concentration of phosphorus (10, 20, and 30 mg L-1), adsorbent bed height (2, 3, and 4 cm), and solution flow rate (1, 2, and 3 mL min-1) were investigated to analyze the breakthrough curves. The results showed that the breakthrough time was shortened as the initial phosphorus concentration, the flow rate increased and the bed height decreased. Higher initial phosphorus concentrations, flow rates, and lower bed heights, led to a faster breakthrough of phosphate ions in the FM-MBC adsorbent. Additionally, it was observed that increasing the pH value was not conducive to the adsorption of phosphorus by the FM-MBC adsorbent. Dynamic adsorption data were fitted to four models (Yoon-Nelson, Thomas, Adams-Bohart, and Bed Depth Service Time), and the R2 values of the Thomas and Yoon-Nelson models exhibited minimal variation, suggesting that the dynamic adsorption process of FM-MBC was rather intricate. The saturated fixed-bed column (including FM-MBC) was regenerated with NaOH or HCl, and it was found that a 0.1 mol L-1 NaOH solution had the best regeneration effect. XRD analysis showed that the reaction product between the FM-MBC composite and phosphate anions was Fe3(PO4)2·H2O. Moreover, the experimental results that FM-MBC can successfully be used to remove phosphorus from actual wastewater.

| S-EPMC10786881 | biostudies-literature

Preparation and Characterization of Fe-Mn Binary Oxide/Mulberry Stem Biochar Composite Adsorbent and Adsorption of Cr(VI) from Aqueous Solution.

Project description:This study details the preparation of Fe-Mn binary oxide/mulberry stem biochar composite adsorbent (FM-MBC) from mulberry stems via the multiple activation by potassium permanganate, ferrous chloride, triethylenetetramine, and epichlorohydrin. The characteristics of FM-MBC had been characterized by SEM-EDS, BET, FT-IR, XRD, and XPS, and static adsorption batch experiments such as pH, adsorption time, were carried out to study the mechanism of Cr(VI) adsorption on FM-MBC and the impact factors. The results indicated that in contrast with the mulberry stem biochar (MBC), the FM-MBC has more porous on surface with a BET surface area of 74.73 m2/g, and the surface loaded with α-Fe2O3 and amorphization of MnO2 particles. Besides, carboxylic acid, hydroxyl, and carbonyls functional groups were also formed on the FM-MBC surface. At the optimal pH 2.0, the maximum adsorption capacity for Cr(VI) was calculated from the Langmuir model of 28.31, 31.02, and 37.14 mg/g at 25, 35, and 45 °C, respectively. The aromatic groups, carboxyls, and the hydroxyl groups were the mainly functional groups in the adsorption of Cr(VI). The mechanism of the adsorption process of FM-MBC for Cr(VI) mainly involves electrostatic interaction, surface adsorption of Cr(VI) on FM-MBC, and ion exchange.

| S-EPMC7036895 | biostudies-literature

Chitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration.

Project description:In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N2 adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g-1 and 31.63 mg.g-1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., -NH2 and -OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.

| S-EPMC9501881 | biostudies-literature

Adsorption Characteristics of Ball Milling-Modified Chinese Medicine Residue Biochar Toward Quercetin.

Project description:Using traditional Chinese medicine residues as raw materials, different biochars (BC) were prepared through oxygen-limited pyrolysis at 300 °C, 500 °C, and 700 °C, and BC was ball-milled to produce ball-milled biochar (BMC). Using these adsorbents to adsorb the allelopathic autotoxic substance quercetin. The physical and chemical properties of various biochars derived from traditional Chinese medicine residues were characterized using the Brunauer-Emmett-Teller-N2 surface areas (BET), scanning electron microscopy (SEM), Fourier transform IR spectroscopy (FTIR), X-ray diffraction (XRD), and Raman spectroscopy (Raman). The study investigated the effects of the initial pH value, different humic acid concentrations, and multiple adsorption-desorption experiments on the removal of quercetin from the solution. The article discusses the adsorption mechanism of quercetin in solution by biochar from a traditional Chinese medicine residue, based on the results of adsorption kinetics and adsorption isotherm fitting. The findings indicate that increasing the pyrolysis temperature reduces the oxygen-containing functional groups of BC, enhances the aromaticity, and stabilizes the carbon structure. The pore structure of BMC becomes more complex after ball milling, which increases the number of oxygen-containing functional groups on the surface. Among the samples tested, BMC700 exhibits the best adsorption performance, with an adsorption capacity of 293.3 mg·g-1 at 318 K. The adsorption process of quercetin by BMC700 follows the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model. The process is primarily a form of multimolecular layer adsorption. Its mechanism involves the pore-filling effect, hydrogen-bonding interaction, electrostatic interaction, and π-π coexistence, as well as the yoke effect. Additionally, they are highly recyclable and show promise in addressing continuous cropping issues.

| S-EPMC10938329 | biostudies-literature

Pb(ΙΙ), Cd(ΙΙ), and Mn(ΙΙ) adsorption onto pruning-derived biochar: physicochemical characterization, modeling and application in real landfill leachate.

Project description:The aim of this study was to systemically evaluate how different pyrolysis temperatures (400, 550, and 700 °C) and particle sizes (1-2 mm and 63-75 µm) were influenced biochar evolution, made from urban pruning waste, during pyrolysis process and to establish their relationships with biochar potential for removal of lead (Pb), cadmium (Cd), and manganese (Mn) from real municipal solid waste landfill leachate. The effects of pH (2-7), contact time (30-300 min) and adsorbent dosage (0.1-5 g L-1) on heavy metals removal were also examined. The results showed that physicochemical properties of biochar were greatly influenced by pyrolysis temperature. Particle size, however, showed little influence on biochar characteristics (p > 0.05). The yield, volatile matter, hydrogen and oxygen contents, and surface functional groups decreased consistently with increasing pyrolysis temperature. An increase in the pH, electrical conductivity, ash, fixed carbon, and specific surface area values was also found. In biochar samples formed at high temperatures (i.e., 550 and 700 °C), Fourier transform infrared spectroscopy-FTIR studies confirmed the increase in aromaticity. Field emission scanning electron microscopy-FESEM images showed differences in the microporous structure and lower size pores at higher temperatures. Biochar pyrolyzed at 700 °C with a particle size of 63-75 µm (i.e., Lv700-63) showed the highest removal efficiency performance. Pb and Cd ions were completely removed (100%) by 0.2 g L-1 Lv700-63 at 7.0 pH and contact times of 120 and 90 min, respectively. The maximum percentage removal of Mn was 86.20% at optimum conditions of 0.2 g L-1 Lv700-63 dosage, 7.0 pH, and 180 min contact time. The findings suggests that the surface complexation, π-electron coordination, and cation exchange were the dominant mechanisms for the Pb, Cd, and Mn removal onto Lv700-63.

| S-EPMC11306770 | biostudies-literature

Upcycling of groundwater treatment sludge to magnetic Fe/Mn-bearing nanorod for chromate adsorption from wastewater treatment.

Project description:Groundwater treatment sludge is a Fe/Mn-bearing waste that is mass produced in groundwater treatment plant. In this study, sludge was converted to a magnetic adsorbent (MA) by adding ascorbate. The sludge was weakly magnetised in the amorphous form with Fe and Mn contents of 28.8% and 8.1%, respectively. After hydrothermal treatment, Fe/Mn oxides in the sludge was recrystallised to siderite and rhodochrosite, with jacobsite as the intermediate in the presence of ascorbate. With an increment in ascorbate dosage, the obtained magnetic adsorbent had a significant increase in chromate adsorption but a decrease in magnetisation. When the Mascorbate/MFe molar ratio was 10, the produced MA-10 was a dumbbell-shaped nanorod with a length of 2-5 ?m and a diameter of 0.5-1 ?m. This MA-10 showed 183.2 mg/g of chromate adsorption capacity and 2.81 emu/g of magnetisation. The mechanism of chromate adsorption was surface coprecipitation of the generated Cr3+ and Fe3+/Mn4+ from redox reaction between chromate and siderite/rhodochrosite on MA-10, separately. This study demonstrated an efficient recycling route of waste sludge from groundwater treatment to produce MA for treating chromate-bearing wastewater.

| S-EPMC7286529 | biostudies-literature

Synthesis and characterization of cost-effective and high-efficiency biochar for the adsorption of Pb<sup>2+</sup> from wastewater.

Project description:This study aimed to investigate the adsorption mechanism of Pb2+ in wastewater using activated carbon derived from inexpensive materials, specifically avocado, bitter orange, and walnut leaves, through a single-step chemical activation process. The activated carbon was prepared using sulfuric acid as an activator, with a particle size of 1 mm. The pyrolysis reactor (slow-pyrolysis) operated at 600 °C for 90 min with a nitrogen flow rate of 5 L/min. Batch experiments were conducted under various conditions to determine the optimal dosage (1.5 g/L), equilibrium contact time (180 min), and pH (6.5). The study focused on employing cost-effective and highly efficient adsorbents, namely biochar produced from tree leaves, for the adsorption process. The results indicated that the pseudo-second-order kinetic model accurately described the adsorption process, while the Freundlich isotherm model best fit the experimental data. These findings suggest that tree leaves can serve as cost-effective and efficient adsorbents for a wide range of applications. Furthermore, multiple adsorption factors were evaluated in batch mode, including contact duration, pH, adsorbent dosage, concentration of the Pb2+ solution, and temperature. The maximum adsorption capacities for the activated carbon derived from avocado, bitter orange, and walnut leaves were found to be 60.46, 59.42, and 58.48 mg/g, respectively. Thus, this study highlights the effectiveness and economic feasibility of using pyrolysis-derived activated carbon from low-cost materials for the removal of Pb2+ from wastewater.

| S-EPMC10511742 | biostudies-literature

On the adsorption characteristics and mechanism of methylene blue by ball mill modified biochar.

Project description:In this study, modified biochar (BRB) was prepared from rice straw by ball milling technique and used for the adsorption of methylene blue (MB) in wastewater. The BRB was characterized by SEM, FTIR and XPS, and the adsorption model and Box-Behnken design were used to optimize the five influencing factors. The results showed that the ball milling technique could increase the content of functional groups (-OH, C=C and C-O, etc.) and aromatic structures on the surface of biochar, thus facilitating the removal of MB. The isotherm model was consistent with the Langmuir adsorption model (R2 = 0.947) and the maximum adsorption capacity was 50.27 mg/g. The adsorption kinetics was consistent with the pseudo-second-order kinetic model (R2 = 1) and the adsorption rate was mainly controlled by chemisorption. The thermodynamic model confirmed that the adsorption process was a spontaneous heat absorption reaction. The maximum adsorption efficiency was 99.78% under the optimal conditions (40℃, pH 8, reaction time = 90 min, dosing amount = 0.1 mg), and the adsorption efficiency could be improved by increasing the pH and BRB dosing amount. The surface functional groups and crystal structure properties of BRB were the main determinants of adsorption, and it was clarified that physical adsorption, electrostatic attraction and π-π interaction were the main mechanisms for the adsorption of MB by BRB. The main mechanisms were clarified. Therefore, BRB is an economic, efficient and green adsorption material with good potential for the removal of dye pollutants in the aqueous environment.

| S-EPMC10692330 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data