Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

SAW Resonators and Filters Based on Sc_0.43Al_0.57N on Single Crystal and Polycrystalline Diamond.

ABSTRACT: The massive data transfer rates of nowadays mobile communication technologies demand devices not only with outstanding electric performances but with example stability in a wide range of conditions. Surface acoustic wave (SAW) devices provide a high Q-factor and properties inherent to the employed materials: thermal and chemical stability or low propagation losses. SAW resonators and filters based on Sc0.43Al0.57N synthetized by reactive magnetron sputtering on single crystal and polycrystalline diamond substrates were fabricated and evaluated. Our SAW resonators showed high electromechanical coupling coefficients for Rayleigh and Sezawa modes, propagating at 1.2 GHz and 2.3 GHz, respectively. Finally, SAW filters were fabricated on Sc0.43Al0.57N/diamond heterostructures, with working frequencies above 4.7 GHz and ~200 MHz bandwidths, confirming that these devices are promising candidates in developing 5G technology.

SUBMITTER: Sinusia Lozano M

PROVIDER: S-EPMC9316532 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ge0.57Ti0.43O2: a new high-pressure material with rutile-type crystal structure.

Project description:Single crystals of a GeO2-TiO2 solid solution with the corresponding composition Ge0.57Ti0.43O2 (germanium titanium tetra-oxide) were obtained by devitrification of germania-titania glass at high pressure and temperature. The new compound crystallizes in the rutile structure type (space group P42/mnm), where Ge and Ti share the same position M (site symmetry m.mm), with occupancy values of 0.57?(3) and 0.43?(3), respectively, and one O-atom position (m.2m). The M site is in a sixfold O-atom coordination and, as in the original TiO2 rutile structure, an elongation of the O-M-O bonds along the c-axis direction of the coordination polyhedron and deviation of the angles from 90° lead to a decrease in the coordination symmetry from octa-hedral to tetra-gonal. The Ge and Ti atoms are fully disordered in the structure, which indicates that the rutile structure is surprisingly pliant given the differing sizes of the two cations.

| S-EPMC6038645 | biostudies-literature

Ambient- and elevated temperature properties of Sc- and Zr-modified Al-6Ni alloys strengthened by Al3Ni microfibers and Al3(Sc, Zr) nanoprecipitates.

Project description:The eutectic Al-6Ni (wt.%) alloy exhibits excellent strength at ambient and elevated temperature, provided by a high volume fraction of Al3Ni microfibers formed during solidification. Here, Al-6Ni is micro-alloyed with Sc and Zr (with 0.1Sc+0.2Zr, 0.2Sc+0.4Zr and 0.3Sc+0.2Zr, wt.%), creating two additional populations of primary and secondary Al3(Sc,Zr) precipitates. The fully eutectic microstructure (α-Al + Al3Ni) observed in Al-6Ni alloy changes, with Sc and Zr addition to hypoeutectic microstructure with primary α-Al grains nucleated on solidification by primary Al3(Sc,Zr) precipitates. Upon subsequent aging, fully-coherent Al3(Sc,Zr) nano-precipitates form in the α-Al matrix between Al3Ni microfibers, providing substantial precipitation strengthening, which is maintained for up to 1 month at 350 °C. Alloy strength - both at ambient temperature and during creep at 300 °C - can be quantitatively described through a superposition of precipitation strengthening by Al3(Sc,Zr) nanoprecipitates and load-transfer strengthening by Al3Ni microfibers.

| S-EPMC9683482 | biostudies-literature

2-(Diphenylphosphinoylmethyl)pyrrole-2-(diphenylphosphinomethyl)pyrrole (0.43/0.57) and tetrachlorido(5-diphenylphosphinomethyl-2H-pyrrole-kappa(2)N,P)titanium(IV).

Project description:The title phosphine oxide-phosphine, 0.43C(17)H(16)NOP.0.57C(17)H(16)NP, (I)/(II), was obtained as a 0.861 (6):1.139 (6) cocrystallized mixture. Hydrogen bonding between the two constituents leads to the formation of 2:2 solid-state assemblies. Instead of forming the expected simple N,P-chelated system via loss of the N-bound H atom, reaction of 2-(diphenylphosphinomethyl)pyrrole, (II), with TiCl(4) leads to the formation of the title titanium(IV) complex, [TiCl(4)(C(17)H(16)NP)], (IV), containing a rearranged neutral ligand in which the N-bound H atom moves to one of the pyrrole C atoms, giving a partially unsaturated ring.

| S-EPMC2855581 | biostudies-literature

Electrodynamic study of YIG filters and resonators.

Project description:Numerical solutions of coupled Maxwell and Landau-Lifshitz-Gilbert equations for a magnetized yttrium iron garnet (YIG) sphere acting as a one-stage filter are presented. The filter is analysed using finite-difference time-domain technique. Contrary to the state of the art, the study shows that the maximum electromagnetic power transmission through the YIG filter occurs at the frequency of the magnetic plasmon resonance with the effective permeability of the gyromagnetic medium ?r???-2, and not at a ferromagnetic resonance frequency. Such a new understanding of the YIG filter operation, makes it one of the most commonly used single-negative plasmonic metamaterials. The frequency of maximum transmission is also found to weakly depend on the size of the YIG sphere. An analytic electromagnetic analysis of resonances in a YIG sphere is performed for circularly polarized electromagnetic fields. The YIG sphere is situated in a free space and in a large spherical cavity. The study demonstrates that both volume resonances and magnetic plasmon resonances can be solutions of the same transcendental equations.

| S-EPMC5048139 | biostudies-other

Natural occurrence of pure nano-polycrystalline diamond from impact crater.

Project description:Consolidated bodies of polycrystalline diamond with grain sizes less than 100 nm, nano-polycrystalline diamond (NPD), has been experimentally produced by direct conversion of graphite at high pressure and high temperature. NPD has superior hardness, toughness and wear resistance to single-crystalline diamonds because of its peculiar nano-textures, and has been successfully used for industrial and scientific applications. Such sintered nanodiamonds have, however, not been found in natural mantle diamonds. Here we identified natural pure NPD, which was produced by a large meteoritic impact about 35 Ma ago in Russia. The impact diamonds consist of well-sintered equigranular nanocrystals (5-50 nm), similar to synthetic NPD, but with distinct [111] preferred orientation. They formed through the martensitic transformation from single-crystal graphite. Stress-induced local fragmentation of the source graphite and subsequent rapid transformation to diamond in the limited time scale result in multiple diamond nucleation and suppression of the overall grain growth, producing the unique nanocrystalline texture of natural NPD. A huge amount of natural NPD is expected to be present in the Popigai crater, which is potentially important for applications as novel ultra-hard material.

| S-EPMC4589680 | biostudies-literature

(E)-1-[(2-Fluoro-phen-yl)imino-meth-yl]-2-naphthol-(Z)-1-[(2-fluoro-phen-yl)amino-methyl-idene]naphthalen-2(1H)-one (0.57/0.43).

Project description:The title Schiff base compound, 0.57C(17)H(12)FNO·0.43C(17)H(12)FNO, reveals both the enol (OH) and keto (NH) tautomeric forms with occupancies of 0.57?(6) and 0.43?(6), respectively. The tautomeric forms are stabilized by intra-molecular O-H?N (enol) and N-H?O (keto) hydrogen bonds. The dihedral angle between the naphthalene ring system and the benzene ring is 32.76?(1)°.

| S-EPMC2979202 | biostudies-literature

Thermal Conductivity of Diamond/SiC Nano-Polycrystalline Composites and Phonon Scattering at Interfaces.

Project description:To compare the thermal properties of heterogeneous and homogeneous interfaces, polycrystalline composites are proposed. Thermal properties of heterogeneous and homogeneous interfaces in the composites are investigated using molecular dynamics simulations. The results indicate that when the inflow of heat arises from the same material, phonon scattering at heterogeneous interfaces is stronger than that at homogeneous interfaces. The phonon wave packet simulations indicate that the stronger phonon scattering at heterogeneous interfaces is caused by the combined actions of transmission coefficients and transmission time.

| S-EPMC6640988 | biostudies-literature

C-Axis Textured, 2-3 μm Thick Al0.75Sc0.25N Films Grown on Chemically Formed TiN/Ti Seeding Layers for MEMS Applications.

Project description:A protocol for successfully depositing [001] textured, 2-3 µm thick films of Al0.75Sc0.25N, is proposed. The procedure relies on the fact that sputtered Ti is [001]-textured α-phase (hcp). Diffusion of nitrogen ions into the α-Ti film during reactive sputtering of Al0.75,Sc0.25N likely forms a [111]-oriented TiN intermediate layer. The lattice mismatch of this very thin film with Al0.75Sc0.25N is ~3.7%, providing excellent conditions for epitaxial growth. In contrast to earlier reports, the Al0.75Sc0.25N films prepared in the current study are Al-terminated. Low growth stress (<100 MPa) allows films up to 3 µm thick to be deposited without loss of orientation or decrease in piezoelectric coefficient. An advantage of the proposed technique is that it is compatible with a variety of substrates commonly used for actuators or MEMS, as demonstrated here for both Si wafers and D263 borosilicate glass. Additionally, thicker films can potentially lead to increased piezoelectric stress/strain by supporting application of higher voltage, but without increase in the magnitude of the electric field.

| S-EPMC9504120 | biostudies-literature

Prediction of novel alloy phases of Al with Sc or Ta.

Project description:Using the evolutionary optimization algorithm, as implemented in the USPEX crystal predictor program, and first principles total energy calculations, the compositional phase diagrams for Al-Sc and Al-Ta alloy systems at zero temperature and pressure have been calculated. In addition to the known binary intermetallic phases, new potentially stable alloys, AlSc3 and AlTa7, have been identified in the Al-poor region of the phase diagram. The dynamic and thermal stability of their lattices has been confirmed from the calculated vibrational normal mode spectra in the harmonic approximation.

| S-EPMC4423498 | biostudies-literature

Theoretical Designs for Organoaluminum C2Al4R4 with Well-Separated Al(I) and Al(III).

Project description:It is well-known that the chemistry of aluminum is dominated by Al(III) in the +3 oxidation state. Only during the past 2 decades has the chemistry of Al(I) and Al(II) been rapidly developed. However, if Al(I) and Al(III) are combined, the inherently high reactivities of Al(I) and Al(III) mostly result in their coupling with each other or interacting with surrounding elements, which easily results in significant deactivation or quenching of the desired oxidation states, as in the case of reported mixed valent Al-compounds. In this article, we report an unprecedented type of organoaluminum system, C2Al4R4 (R = H, SiH3, Si(C6H5)3, SiiPrDis2, SiMe(SitBu3)2), whose lowest-energy structure, C2Al4R4-01, contains two Al(I) and two Al(III) atoms. The global nature and bonding motif of the parent C2Al4R4-01 (R = H) were supported by an extensive global isomeric search, CBS-QB3 energy calculations, adaptive natural density partitioning, and bond order analysis. Interestingly and in sharp contrast to most organoaluminum species, C2Al4R4-01 is associated with little multicenter bonding. C2Al4R4-01 has a high feasibility of being observed either in the gas or condensed phases (with suitable substitutents). With well-separated Al(I) and Al(III), C2Al4R4-01 (with suitable substitutents) could serve as the first Al/Al frustrated Lewis pair.

| S-EPMC6644568 | biostudies-literature