Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Al₂O₃-Based Hollow Fiber Membranes Functionalized by Nitrogen-Doped Titanium Dioxide for Photocatalytic Degradation of Ammonia Gas.

ABSTRACT: In recent years, reactive ammonia (NH₃) has emerged as a major source of indoor air pollution. In this study, Al₂O₃-based hollow fiber membranes functionalized with nitrogen-doped titanium dioxide were produced and successfully applied for efficient heterogeneous photocatalytic NH₃ gas degradation. Al₂O₃ hollow fiber membranes were prepared using the phase inversion process. A dip-coating technique was used to deposit titanium dioxide (TiO₂) and nitrogen-doped titanium dioxide (N-TiO₂) thin films on well-cleaned Al₂O₃-based hollow fiber membranes. All heterogeneous photocatalytic degradation tests of NH₃ gas were performed with both UV and visible light irradiation at room temperature. The nitrogen doping effects on the NH₃ heterogeneous photocatalytic degradation capacity of TiO₂ were investigated, and the effect of the number of membranes (30, 36, 42, and 48 membranes) of the prototype lab-scale photocatalytic membrane reactor, with a modular design, on the performances in different light conditions was also elucidated. Moreover, under ultraviolet and visible light, the initial concentration of gaseous NH₃ was reduced to zero after only fifteen minutes in a prototype lab-scale stage with a photocatalytic membrane reactor based on an N-TiO₂ photocatalyst. The number of Al₂O₃-based hollow fiber membranes functionalized with N-TiO₂ photocatalysts increases the capacity for NH₃ heterogeneous photocatalytic degradation.

SUBMITTER: Magnone E

PROVIDER: S-EPMC9320378 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Rapid preparation of terbium-doped titanium dioxide nanoparticles and their enhanced photocatalytic performance.

Project description:Further applications of photocatalysis were limited by the high recombination probability of photo-induced electron-hole pairs in traditional titanium dioxide nanoparticles (TiO2 NPs). Herein, we modified them with rare earth metal via a facile sol-gel method, using tetrabutyl titanate as a precursor and terbium (III) nitrate hexahydrate as terbium (Tb) source. The resulting samples with different Tb doping amounts (from 0 to 2%) have been characterized by X-ray diffraction, UV-visible diffuse reflectance spectroscopy, X-ray photo-electron spectroscopy and a scanning electron microscope. The photocatalytic performance of Tb-doped TiO2 was evaluated by the degradation of methylene blue. The effects of Tb doping amount and initial pH value of solution were investigated in detail. The composite with Tb doping amount of 1.0 wt% showed the highest photocatalytic performance. It exhibited approximately three times enhancement in photocatalytic activity with a reaction rate constant of 0.2314 h-1 when compared with that of commercial P25 (0.0827 h-1). In addition, it presented low toxicity on zebrafishes with 96 h-LC50 of 23.2 mg l-1, and has been proved to be reusable for at least four cycles without significant loss of photocatalytic activity. A probable photocatalytic mechanism of Tb-doped TiO2 was proposed according to the active species trapping experiments. The high photocatalytic performance, excellent reusability and low toxicity of Tb-doped TiO2 indicated that it is a promising candidate material in the future treatment of dye wastewater.

| S-EPMC6837207 | biostudies-literature

Phase-selective active sites on ordered/disordered titanium dioxide enable exceptional photocatalytic ammonia synthesis.

Project description:Photocatalytic N2 fixation to NH3 via defect creation on TiO2 to activate ultra-stable N[triple bond, length as m-dash]N has drawn enormous scientific attention, but poor selectivity and low yield rate are the major bottlenecks. Additionally, whether N2 preferentially adsorbs on phase-selective defect sites on TiO2 in correlation with appropriate band alignment has yet to be explored. Herein, theoretical predictions reveal that the defect sites on disordered anatase (Ad) preferentially exhibit higher N2 adsorption ability with a reduced energy barrier for a potential-determining-step (*N2 to NNH*) than the disordered rutile (Rd) phase of TiO2. Motivated by theoretical simulations, we synthesize a phase-selective disordered-anatase/ordered-rutile TiO2 photocatalyst (Na-Ad/Ro) by sodium-amine treatment of P25-TiO2 under ambient conditions, which exhibits an efficient NH3 formation rate of 432 μmol g-1 h-1, which is superior to that of any other defect-rich disordered TiO2 under solar illumination with a high apparent quantum efficiency of 13.6% at 340 nm. The multi-synergistic effects including selective N2 chemisorption on the defect sites of Na-Ad with enhanced visible-light absorption, suitable band alignment, and rapid interfacial charge separation with Ro enable substantially enhanced N2 fixation.

| S-EPMC8293799 | biostudies-literature

Carbon Dot-Doped Titanium Dioxide Sheets for the Efficient Photocatalytic Performance of Refractory Pollutants.

Project description:Broad solar light harvesting and fast photoinduced electron-hole migration are two critical factors for the catalytic capacity of photocatalytic system. In this study, novel visible light-driven carbon dot-TiO2 nanosheet (CD-TN) photocatalysts are successfully prepared by loading CDs on the surface of TNs through the hydrothermal method. The microstructure, chemical components, and optical properties of the prepared samples are characterized via X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, UV-visible diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy analysis. Congo red (CR), rhodamine B (RhB), and tetracycline (TC) are selected as pollutants to assess the catalytic performance of CD-TNs. As expected, the removal efficiencies of CD-TNs for CR, RhB, and TC are 94.6% (120 min), 97.2% (150 min), and 96.1% (60 min), respectively, obviously higher than that of pure TNs. The enhanced degradation efficiency of CD-TNs is predominantly ascribed to the merits of CDs (excellent up-conversion property and electron transfer property). Moreover, according to the several degradation cycles, CD-TNs possess the excellent stability, having removed 93.3% of CR after 120 min irradiation.

| S-EPMC8453265 | biostudies-literature

One-Step Hydrothermal Synthesis of Precious Metal-Doped Titanium Dioxide-Graphene Oxide Composites for Photocatalytic Conversion of CO2 to Ethanol.

Project description:We utilized a one-step hydrothermal process for the synthesis of precious metal-doped titanium dioxide (TiO2)/graphene oxide (GO) composites. The metal-doped TiO2/GO composites, including silver-TiO2/GO (Ag-TiO2/GO), palladium-TiO2/GO (Pd-TiO2/GO), and copper-TiO2/GO (Cu-TiO2/GO), were synthesized by mixing a metal precursor, titanium butoxide, and graphene oxide in a water-ethanol mixture in an autoclave hydrothermal reactor. The photocatalytic performance of the composites was tested in the photoreduction of carbon dioxide (CO2) to ethanol. Ag-TiO2/GO, Pd-TiO2/GO, and Cu-TiO2/GO exhibited an ethanol production rate of 109, 125, and 233 μmol/gcat h, respectively. The outstanding performances of Cu-TiO2/GO can be attributed to a combined effect of key parameters, including optical band gap, crystallite size, and BET surface area.

| S-EPMC8717584 | biostudies-literature

Silicon-Doped Titanium Dioxide Nanotubes Promoted Bone Formation on Titanium Implants.

Project description:While titanium (Ti) implants have been extensively used in orthopaedic and dental applications, the intrinsic bioinertness of untreated Ti surface usually results in insufficient osseointegration irrespective of the excellent biocompatibility and mechanical properties of it. In this study, we prepared surface modified Ti substrates in which silicon (Si) was doped into the titanium dioxide (TiO₂) nanotubes on Ti surface using plasma immersion ion implantation (PIII) technology. Compared to TiO₂ nanotubes and Ti alone, Si-doped TiO₂ nanotubes significantly enhanced the expression of genes related to osteogenic differentiation, including Col-I, ALP, Runx2, OCN, and OPN, in mouse pre-osteoblastic MC3T3-E1 cells and deposition of mineral matrix. In vivo, the pull-out mechanical tests after two weeks of implantation in rat femur showed that Si-doped TiO₂ nanotubes improved implant fixation strength by 18% and 54% compared to TiO₂-NT and Ti implants, respectively. Together, findings from this study indicate that Si-doped TiO₂ nanotubes promoted the osteogenic differentiation of osteoblastic cells and improved bone-Ti integration. Therefore, they may have considerable potential for the bioactive surface modification of Ti implants.

| S-EPMC4813156 | biostudies-literature

Photocatalytic, Antimicrobial and Biocompatibility Features of Cotton Knit Coated with Fe-N-Doped Titanium Dioxide Nanoparticles.

Project description:Our research was focused on the evaluation of the photocatalytic and antimicrobial properties, as well as biocompatibility of cotton fabrics coated with fresh and reused dispersions of nanoscaled TiO₂-1% Fe-N particles prepared by the hydrothermal method and post-annealed at 400 °C. The powders were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy and X-ray photoelectron spectroscopy. The textiles coated with doped TiO₂ were characterized by scanning electron microscopy and energy dispersive X-ray analyses, and their photocatalytic effect by trichromatic coordinates of the materials stained with methylene blue and coffee and exposed to UV, visible and solar light. The resulting doped TiO₂ consists of a mixture of prevailing anatase phase and a small amount (~15%-20%) of brookite, containing Fe3+ and nitrogen. By reusing dispersions of TiO₂-1% Fe-N, high amounts of photocatalysts were deposited on the fabrics, and the photocatalytic activity was improved, especially under visible light. The treated fabrics exhibited specific antimicrobial features, which were dependent on their composition, microbial strain and incubation time. The in vitro biocompatibility evaluation on CCD-1070Sk dermal fibroblasts confirmed the absence of cytotoxicity after short-term exposure. These results highlight the potential of TiO₂-1% Fe-N nanoparticles for further use in the development of innovative self-cleaning and antimicrobial photocatalytic cotton textiles. However, further studies are required in order to assess the long-term skin exposure effects and the possible particle release due to wearing.

| S-EPMC5457061 | biostudies-other

Spontaneously formed gradient chemical compositional structures of niobium doped titanium dioxide nanoparticles enhance ultraviolet- and visible-light photocatalytic performance.

Project description:Semiconductor photocatalysts showing excellent performance under irradiation of both ultraviolet (UV)- and visible (VIS)-light are highly demanded towards realization of sustainable energy systems. TiO2 is one of the most common photocatalysts and has been widely investigated as candidate showing UV/VIS responsive performance. In this study, we report synthesis of Nb doped TiO2 by environmentally benign mechanochemical reaction. Nb atoms were successfully incorporated into TiO2 lattice by applying mechanical energy. As synthesized Nb doped TiO2 were metastable phase and formed chemical compositional gradient structure of poorly Nb doped TiO2 core and highly Nb doped TiO2 surface after high temperature heat treatment. It was found that formed gradient chemical compositional heterojunctions effectively enhanced photocatalytic performance of Nb doped TiO2 under both of UV- and VIS-light irradiation, which is different trend compared with Nb doped TiO2 prepared through conventional methods. The approach shown here will be employed for versatile systems because of simple and environmentally benign process.

| S-EPMC8324787 | biostudies-literature

Aminosilane-Functionalized Zeolite Y in Pebax Mixed Matrix Hollow Fiber Membranes for CO2/CH4 Separation.

Project description:Due to their interfacial defects between inorganic fillers and polymer matrices, research into mixed matrix membranes (MMMs) is challenging. In the application of CO2 separation, these defects can potentially jeopardize the performance of membranes. In this study, aminosilane functionalization is employed to improve the nano-sized zeolite Y (ZeY) particle dispersion and adhesion in polyether block amide (Pebax). The performance of CO2/CH4 separation of Pebax mixed matrix composite hollow fiber membranes, incorporated with ZeY and aminosilane-modified zeolite Y (Mo-ZeY), is investigated. The addition of the zeolite filler at a small loading at 5 wt.% has a positive impact on both gas permeability and separation factor. Due to the CO2-facilitated transport effect, the performance of MMMs is further improved by the amino-functional groups modified on the ZeY. When 5 wt.% of Mo-ZeY is incorporated, the gas permeability and CO2/CH4 separation factor of the Pebax membrane are enhanced by over 100% and 35%, respectively.

| S-EPMC9823953 | biostudies-literature

Novel hollow titanium dioxide nanospheres with antimicrobial activity against resistant bacteria.

Project description:The search for and synthesis of new antimicrobial nanostructures is important to reduce microbial incidence that induces infectious diseases and to aid in the antibiotic resistance crisis, which are two of the most pressing issues in global public health. In this work, novel, hollow, calcined titanium dioxide nanospheres (CSTiO2) were successfully synthesized for the first time through the combination of electrospinning and atomic layer deposition techniques. Poly(vinylpyrrolidone) (PVP) electrosprayed spherical particles were double-coated with alumina and titanium dioxide, and after a calcination process, hollow nanospheres were obtained with a radius of approximately 345 nm and shell thickness of 17 nm. The structural characterization was performed using electron microscopy, and X-ray diffraction and small-angle X-ray diffraction evidenced an anatase titanium dioxide crystalline structure. Thermogravimetric analysis and Fourier-transform infrared spectroscopy studies demonstrated the absence of polymer residue after the calcination process. The antimicrobial properties of the developed CSTiO2 hollow nanospheres were evaluated against different bacteria, including resistant E. coli and S. aureus strains, and when compared to commercial TiO2 nanoparticles, CSTiO2 nanospheres exhibited superior performance. In addition, the positive effect of UV irradiation on the antimicrobial activity was demonstrated.

| S-EPMC6720579 | biostudies-literature

Black Hydroxylated Titanium Dioxide Prepared via Ultrasonication with Enhanced Photocatalytic Activity.

Project description:The amorphous TiO2 derived from hydroxylation has become an effective approach for the enhancement of photocatalytic activity of TiO2 since a kind of special black TiO2 was prepared by engineering disordered layers on TiO2 nanocrystals via hydrogenation. In this contribution, we prepared totally amorphous TiO2 with various degrees of blackness by introducing hydroxyls via ultrasonic irradiation, through which can we remarkably enhance the photocatalytic activity of TiO2 with improved light harvesting and narrowed band gap.

| S-EPMC4488957 | biostudies-literature