Aerogel Assembled by Two Types of Carbon Nanoparticles for Efficient Removal of Heavy Metal Ions.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang XC
PROVIDER: S-EPMC9329938 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Carbon dots and their derivatives with fascinating photoluminescence properties have recently attracted tremendous scientific attention. This work describes the preparation of novel fluorescent bentonite clay (B), modified with carbon dot nanomaterials (CDs), and its usage as a lead removal platform. The CDs were prepared using a hydrothermal method from graphitic waste which served as the carbon source material. The as-obtained CDs were found to be fluorescent, being spherical in shape, positively charged, and smaller than 5 nm. Encouraged by their structure and photoluminescence features, they were used as surface modifiers to make fluorescent bentonite nanocomposites. Bentonite was used as a negatively charged model of aluminosilicate and reacted with the positively charged CDs. XRD, FTIR, XPS, and fluorescence analysis were used to characterize the prepared materials. The results indicate that the CDs intercalated inside the bentonite matrix were stable with excellent optical properties over time. They were finally used as an efficient hybrid platform for lead removal with a removal efficiency of 95% under light conditions, at room temperature, in an alkaline medium, and after only 10 min of reaction, compared to 70% under dark conditions. The pseudo-second-order kinetics and Langmuir isotherm models were better fitted to describe the adsorption process. The maximum adsorption capacity was equal to 400 mg g-1 toward Pb(ii) removal, at room temperature and pH = 8, under light conditions. To summarize, we have designed UV light stimuli responsive carbon dot-intercalated clay with high Pb(ii) adsorption capacity and long-term stability.
| S-EPMC10408590 | biostudies-literature
Project description:The exploration of simultaneous removal of co-existing or multiple pollutants from water by the means of nanomaterials paves a new avenue that is free from secondary pollution and inexpensive. In the aquatic environment, river water contains a mixture of ions, which can influence the adsorption process. In this respect, removing heavy metal ions becomes a true challenge. Here, four heavy metal ions, namely, Pb2+, Cd2+, Cu2+, and Ni2+, have been successfully removed simultaneously from river water using ultrafine mesoporous magnetite (Fe3O4) nanoparticles (UFMNPs) based on the affinity of these metal ions toward the UFMNP surfaces as well as their unique mesoporous structure, promoting the easy adsorption. The individual removal efficiencies of Pb2+, Cd2+, Cu2+, and Ni2+ ions from river water were 98, 87, 90, and 78%, respectively, whereas the removal efficiencies of the mixed Pb2+, Cd2+, Cu2+, and Ni2+ ions were 86, 80, 84, and 54%, respectively, in the same river water. Thus, the data clearly indicate the complex removal of heavy metal ions in multi-ion systems. This study has demonstrated the huge potential of UFMNPs to be effective for their use in wastewater treatment, especially to simultaneously remove multiple heavy metal ions from aqueous media.
| S-EPMC6648574 | biostudies-literature
Project description:In this study, a stable, cost-effective and environmentally friendly porous 2,5-bis(methylthio)terephthalaldehyde-chitosan-grafted graphene oxide (BMTTPA-CS-GO) nanocomposite was synthesized by covalently grafting BMTTPA-CS onto the surfaces of graphene oxide and used for removing heavy metal ions from polluted water. According to well-established Hg2+-thioether coordination chemistry, the newly designed covalently linked stable porous BMTTPA-CS-GO nanocomposite with thioether units on the pore walls greatly increases the adsorption capacity of Hg2+ and does not cause secondary pollution to the environment. The results of sorption experiments and inductively coupled plasma mass spectrometry measurements demonstrate that the maximum adsorption capacity of Hg2+ on BMTTPA-CS-GO at pH 7 is 306.8 mg g-1, indicating that BMTTPA-CS-GO has excellent adsorption performance for Hg2+. The experimental results show that this stable, environmentally friendly, cost-effective and excellent adsorption performance of BMTTPA-CS-GO makes it a potential nanocomposite for removing Hg2+ and other heavy metal ions from polluted water, and even drinking water. This study suggests that covalently linked crucial groups on the surface of carbon-based materials are essential for improving the adsorption capacity of adsorbents for heavy metal ions.
| S-EPMC8694123 | biostudies-literature
Project description:Heavy metal pollution caused by industrial wastewater such as mining and metallurgical wastewater is a major global concern. Therefore, this study used modified lignite as a low-cost adsorbent for heavy metal ions. Pingzhuang lignite was dissolved and modified using Fusarium lignite B3 to prepare a biotransformed-lignite adsorbent (BLA). The O, H, and N contents of the BLA increased after transformation, and the specific surface area increased from 1.81 to 5.66 m2·g-1. Various adsorption properties were investigated using an aqueous solution of Cu(Ⅱ). The kinetic and isothermal data were well-fitted by pseudo-second-order and Langmuir models, respectively. The Langmuir model showed that the theoretical Cu(II) adsorption capacity was 71.47 mg·g-1. Moreover, large particles and a neutral pH were favorable for the adsorption of heavy metal ions. The adsorption capacities of raw lignite and BLA were compared for various ions. Microbial transformation greatly improved the adsorption capacity, and the BLA had good adsorption and passivation effects with Cu(II), Mn(II), Cd(II), and Hg(II). Investigation of the structural properties showed that the porosity and specific surface area increased after biotransformation, and there were more active groups such as -COOH, Ar-OH, and R-OH, which were involved in the adsorption performance.
| S-EPMC10343599 | biostudies-literature
Project description:A novel type of graphene-like nanoparticle, synthesized by oxidation and unfolding of C60 buckminsterfullerene fullerene, showed multiple and reproducible sensitivity to Cu2+, Pb2+, Cd2+, and As(III) through different degrees of fluorescence quenching or, in the case of Cd2+, through a remarkable fluorescence enhancement. Most importantly, only for Cu2+ and Pb2+, the fluorescence intensity variations came with distinct modifications of the optical absorption spectrum. Time-resolved fluorescence study confirmed that the common origin of these diverse behaviors lies in complexation of the metal ions by fullerene-derived carbon layers, even though further studies are required for a complete explanation of the involved processes. Nonetheless, the different response of fluorescence and optical absorbance towards distinct cationic species makes it possible to discriminate between the presence of Cu2+, Pb2+, Cd2+, and As(III), through two simple optical measurements. To this end, the use of a three-dimensional calibration plot is discussed. This property makes fullerene-derived nanoparticles a promising material in view of the implementation of a selective, colorimetric/fluorescent detection system.
| S-EPMC5982591 | biostudies-literature
Project description:Design and synthesis of environmentally friendly adsorbents with high adsorption capacities are urgently needed to control pollution of water resources. In this work, a calcium ion-induced approach was used to synthesize sodium alginate fibroid hydrogel (AFH). The as-prepared AFH has certain mechanical strength, and the mechanical strength is enhanced especially after the adsorption of heavy metal ions, which is very convenient for the recovery. AFH exhibited excellent adsorption performances for Cu2+, Cd2+, and Pb2+ ions and displayed very high saturated adsorption capacities (Qe) of 315.92 mg·g-1 (Cu2+), 232.35 mg·g-1 (Cd2+), and 465.22 mg·g-1 (Pb2+) with optimized pH values (3.0-4.0) and temperature (303 K). The study of isotherms and kinetics indicated that adsorption processes of heavy metal ions fitted well with the pseudo-second-order kinetics model and the Langmuir model. Pb2+ was found to have the strongest competitiveness among the three heavy metal ions. Thus, AFH has great application prospects in the field of heavy metal ions removing from wastewater.
| S-EPMC6966715 | biostudies-literature
Project description:For effective soil remediation, it is vital to apply environmentally friendly and cost-effective technologies following the notion of green sustainable development. In the context of recycling waste and preserving nutrients in the soil, biochar production and utilization have become widespread. There is an urgent need to develop high-efficiency biochar-based sorbents for pollution removal from soil. This research examined the efficacy of soil remediation using biochar made from three distinct sources: wood, and agricultural residues (sunflower and rice husks). The generated biochars were characterized by SEM/SCEM, XRF, XRD, FTIR, BET Specific Surface Area, and elemental compositions. The presence of hydroxyl and phenolic functional groups and esters in wood, sunflower and rice husk biochar were noted. The total volume of pores was in the following descending order: rice husk > wood > sunflower husk. However, wood biochar had more thermally stable, heterogeneous, irregular-shaped pores than other samples. Adsorption of soil-heavy metals into biochars differed depending on the type of adsorbent, according to data derived from distribution coefficients, sorption degree, Freundlich, and Langmuir adsorption models. The input of biochars to Calcaric Fluvic Arenosol increased its adsorption ability under contamination by Cu(II), Zn(II), and Pb(II) in the following order: wood > rice husk > sunflower husk. The addition of sunflower husk, wood, and rice husk biochar to the soil led to an increase in the removal efficiency of metals in all cases (more than 77%). The increase in the percentage adsorption of Cu and Pb was 9-19%, of Zn was 11-21%. The present results indicated that all biochars functioned well as an absorbent for removing heavy metals from soils. The tailor-made surface chemistry properties and the high sorption efficiency of the biochar from sunflower and rice husks could potentially be used for soil remediation.
| S-EPMC9898244 | biostudies-literature
Project description:Since large amounts of pineapple leaves are abandoned after harvest in agricultural areas, the possibility of developing value-added products from them is of interest. In this work, cellulose fiber was extracted from pineapple leaves and modified with ethylenediaminetetraacetic acid (EDTA) and carboxymethyl (CM) groups to produce Cell-EDTA and Cell-CM, respectively, which were then used as heavy metal ion adsorbents. A solution of either lead ion (Pb2+) or cadmium ion (Cd2+) was used as wastewater for the purpose of studying adsorption efficiencies. The adsorption efficiencies of Cell-EDTA and Cell-CM were significantly higher than those of the unmodified cellulose in the pH range 1-7. Maximum adsorptions toward Pb2+ and Cd2+ were, for Cell-EDTA, 41.2 and 33.2 mg g-1, respectively, and, for Cell-CM, 63.4 and 23.0 mg g-1, respectively. The adsorption behaviors of Cell-CM for Pb2+ and Cd2+ fitted well with a pseudo-first-order model, but those of Cell-EDTA for Pb2+ and Cd2+ fitted well with a pseudo-second-order model. All of the adsorption behaviors could be described using the Langmuir adsorption isotherm. Desorption studies of Pb2+ and Cd2+ on both adsorbents using 1 M HCl suggested that regenerability of Cell-EDTA was, for both adsorbates, better than that of Cell-CM. Moreover, adsorption measurements in a mixture of Pb2+ and Cd2+ at various ratios showed that for both adsorbents the adsorption of Pb2+ was higher than that of Cd2+, while the adsorption selectivity for Pb2+ of Cell-CM was greater than that of Cell-EDTA. This study showed that the modified cellulosic adsorbents made from pineapple leaves were able to efficiently adsorb metal ions.
| S-EPMC7081430 | biostudies-literature
Project description:Metal nanomaterials have been reported as effective absorbents for the removal of pollutants in the water system, but the release of ions from these nanomaterials brings another concern. Herein, silver nanoclusters (AgNCs) were encapsulated in porous metal-organic frameworks of ZIF-8 (MOF-AgNCs). Compared to AgNCs, the release of Ag+ significantly decreases from MOF-AgNCs, indicating that the product presents a lower threat to the environment. The MOF-AgNCs were employed for the rapid removal of heavy metals, such as Pb2+ and Mn2+, from water. The mechanism and removal efficiencies were investigated.
| S-EPMC6651488 | biostudies-literature
Project description:Here, we propose an environmentally benign removal technique for heavy metal ions based on selective and spontaneous transfer to oleic acid. The ions can be removed via (1) the selective and rapid complexation with the carboxylic end of oleic acid at an oleic acid/water interface, and (2) the diffusion of such complex into the oleic acid layer. A wide variety of heavy metal ions such as Cu2+, Pb2+, Zn2+, and Ni2+ can be selectively removed over K+ and Na+. For example, the concentration of Cu2+ is reduced to below 1.3 ppm within 24?h, which corresponds to the level of Cu2+ permitted by the Environmental Protection Agency. The addition of ethylenediamine ligand to the metal ion solutions is also shown to enhance the phase transfer. The removal efficiency is increased by up to 6 times when compared with that in the absence of the ligand and follows the order, Cu2+ (99%)?>?Pb2+ (96%)?>?Zn2+ (95%)?>?Ni2+ (65%). Moreover, the removal time can be shortened from 24?h to 1?h. The effect of an emulsion induced by a mechanical agitation on the removal of heavy metal ion is also studied.
| S-EPMC5711890 | biostudies-literature