Plasmonic Metal/Semiconductor Heterostructure for Visible Light-Enhanced H2 Production
Ontology highlight
ABSTRACT:
SUBMITTER: Khanam S
PROVIDER: S-EPMC9330258 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Scalable and sustainable solar hydrogen production through photocatalytic water splitting requires highly active and stable earth-abundant co-catalysts to replace expensive and rare platinum. Here we employ density functional theory calculations to direct atomic-level exploration, design and fabrication of a MXene material, Ti3C2 nanoparticles, as a highly efficient co-catalyst. Ti3C2 nanoparticles are rationally integrated with cadmium sulfide via a hydrothermal strategy to induce a super high visible-light photocatalytic hydrogen production activity of 14,342??mol?h-1?g-1 and an apparent quantum efficiency of 40.1% at 420?nm. This high performance arises from the favourable Fermi level position, electrical conductivity and hydrogen evolution capacity of Ti3C2 nanoparticles. Furthermore, Ti3C2 nanoparticles also serve as an efficient co-catalyst on ZnS or ZnxCd1-xS. This work demonstrates the potential of earth-abundant MXene family materials to construct numerous high performance and low-cost photocatalysts/photoelectrodes.
| S-EPMC5512649 | biostudies-literature
Project description:A porous ball-flower-like Co3O4/Fe2O3 heterostructural photocatalyst was synthesized via a facile metal-organic-framework-templated method, and showed an excellent degradation performance in the model molecule rhodamine B under visible light irradiation. This enhanced photocatalytic activity can be attributed to abundant photo-generated holes and hydroxyl radicals, and the combined effects involving a porous structure, strong visible-light absorption, and improved interfacial charge separation. It is notable that the ecotoxicity of the treated reaction solution was also evaluated, confirming that an as-synthesized Co3O4/Fe2O3 catalyst could afford the sunlight-driven long-term recyclable degradation of dye-contaminated wastewater into non-toxic and colorless wastewater.
| S-EPMC8951189 | biostudies-literature
Project description:Type II vertical heterojunction is a good solution for long-wavelength light detection. Here, we report a rhenium selenide/molybdenum telluride (n-ReSe2/p-MoTe2) photodetector for high-performance photodetection in the broadband spectral range of 405-2000 nm. Due to the low Schottky barrier contact of the ReSe2/MoTe2 heterojunction, the rectification ratio (RR) of ~102 at ±5 V is realized. Besides, the photodetector can obtain maximum responsivity (R = 1.05 A/W) and specific detectivity (D* = 6.66 × 1011 Jones) under the illumination of 655 nm incident light. When the incident wavelength is 1550-2000 nm, a photocurrent is generated due to the interlayer transition of carriers. This compact system can provide an opportunity to realize broadband infrared photodetection.
| S-EPMC9370303 | biostudies-literature
Project description:Hybrid nanoarchitectures of AgInS2 and TiO2 photocatalysts were prepared by using a modified sol-gel method. The experimental results reveal that these nanocomposites display enhanced visible light absorption and effective charge carrier separation compared to their pristine parent samples (AgInS2 or TiO2). 0.5 wt % AgInS2 loading was found to be the optimum concentration for photocatalytic applications. More than 95% of doxycycline degradation was achieved within 180 min of solar light illumination. Similarly, the dopant concentrations at lower values (<2 wt %) exhibited 300 times higher H2 generation rate under visible light irradiation compared to AgInS2 and TiO2. The microbial strains (Escherichia coli and Staphylococcus aureus) exhibited a 99.999% reduction within half an hour of simulated solar light illumination. The computational investigation was employed to understand the structural, electronic, and the dielectric properties of AgInS2 and TiO2 composites. The improved photocatalytic results are explained as a result of the decreased rate of exciton recombination. The current investigation opens up new insights into the use of novel ternary heterostructure nanocomposites for improved visible light activity.
| S-EPMC6964301 | biostudies-literature
Project description:Novel photocatalysts -CdSe quantum dots (QDs)/g-C3N4- were successfully constructed. The structure, chemical composition, and optical properties of the prepared samples were investigated via a series of characterization techniques. The results indicated that CdSe QDs/g-C3N4 photocatalysts exhibited remarkably enhanced photocatalytic activity for visible-light-induced H2 evolution compared to pristine g-C3N4 and CdSe QDs and addition of 13.6 wt % CdSe QDs into the composite photocatalyst generated the highest H2 production rate. The enhanced photocatalytic performance of CdSe QDs/g-C3N4 can be attributed to the synergistic effects of excellent visible absorption and high charge separation efficiency from the heterostructure. This work could not only provide a facile method to fabricate semiconductor QDs-modified g-C3N4 photocatalysts but also contribute to the design for heterostructures.
| S-EPMC6643951 | biostudies-literature
Project description:Platinum@hexaniobate nanopeapods (Pt@HNB NPPs) are a nanocomposite photocatalyst that was selectively engineered to increase the efficiency of hydrogen production from visible light photolysis. Pt@HNB NPPs consist of linear arrays of high surface area Pt nanocubes encapsulated within scrolled sheets of the semiconductor H x K4-x Nb6O17 and were synthesized in high yield via a facile one-pot microwave heating method that is fast, reproducible, and more easily scalable than multi-step approaches required by many other state-of-the-art catalysts. The Pt@HNB NPPs' unique 3D architecture enables physical separation of the Pt catalysts from competing surface reactions, promoting electron efficient delivery to the isolated reduction environment along directed charge transport pathways that kinetically prohibit recombination reactions. Pt@HNB NPPs' catalytic activity was assessed in direct comparison to representative state-of-the-art Pt/semiconductor nanocomposites (extPt-HNB NScs) and unsupported Pt nanocubes. Photolysis under similar conditions exhibited superior H2 production by the Pt@HNB NPPs, which exceeded other catalyst H2 yields (μmol) by a factor of 10. Turnover number and apparent quantum yield values showed similar dramatic increases over the other catalysts. Overall, the results clearly demonstrate that Pt@HNB NPPs represent a unique, intricate nanoarchitecture among state-of-the-art heterogeneous catalysts, offering obvious benefits as a new architectural pathway toward efficient, versatile, and scalable hydrogen energy production. Potential factors behind the Pt@HNB NPPs' superior performance are discussed below, as are the impacts of systematic variation of photolysis parameters and the use of a non-aqueous reductive quenching photosystem.
| S-EPMC9795648 | biostudies-literature
Project description:Composites of g-C3N4/TiO2 were one-step prepared using electron impact with dielectric barrier discharge (DBD) plasma as the electron source. Due to the low operation temperature, TiO2 by the plasma method shows higher specific surface area and smaller particle size than that prepared via conventional calcination. Most interestingly, electron impact produces more oxygen vacancy on TiO2, which facilitates the recombination and formation of heterostructure of g-C3N4/TiO2. The composites have higher light absorption capacity and lower charge recombination efficiency. g-C3N4/TiO2 by plasma can produce hydrogen at a rate of 219.9 ?mol·g-1·h-1 and completely degrade Rhodamine B (20mg·L-1) in two hours. Its hydrogen production rates were 3 and 1.5 times higher than that by calcination and pure g-C3N4, respectively. Electron impact, ozone and oxygen radical also play key roles in plasma preparation. Plasma has unique advantages in metal oxides defect engineering and the preparation of heterostructured composites with prospective applications as photocatalysts for pollutant degradation and water splitting.
| S-EPMC7221541 | biostudies-literature
Project description:We present a facile approach to preparing a BiOCl1-x Br x @AgBr heterostructure using a two-step solvothermal method. Multiple characterisation techniques have been employed to investigate its morphology, structure, optical and electronic properties and photocatalytic performance. The photocatalytic activity of the BiOCl1-x Br x @AgBr heterostructure was sufficiently evaluated by adopting Reactive Blue KN-R as the target organic pollutant under visible light irradiation. The as-prepared BiOCl1-x Br x @AgBr exhibited much higher photocatalytic activity than BiOCl1-x Br x and BiOCl, which was ascribed to the movement of photogenerated electrons from AgBr to BiOCl1-x Br x , resulting in effective charge separation and transfer. Moreover, the modification of BiOCl1-x Br x with AgBr broadened the light absorption range, making the composite suitable for visible light excitation. The excellent photocatalytic performance provides potential opportunities to utilize BiOCl1-x Br x @AgBr for environmental purification and organic pollution treatment of water.
| S-EPMC9080307 | biostudies-literature
Project description:We designed and successfully fabricated a ZnS/CdS 3D mesoporous heterostructure with a mediating Zn1-x Cd x S interface that serves as a charge carrier transport channel for the first time. The H2-production rate and the stability of the heterostructure involving two sulfides were dramatically and simultaneously improved by the careful modification of the interface state via a simple post-annealing method. The sample prepared with the optimal parameters exhibited an excellent H2-production rate of 106.5 mmol h-1 g-1 under visible light, which was 152 and 966 times higher than CdS prepared using ethylenediamine and deionized water as the solvent, respectively. This excellent H2-production rate corresponded to the highest value among the CdS-based photocatalysts. Moreover, this heterostructure showed excellent photocatalytic stability over 60 h.
| S-EPMC5500944 | biostudies-literature
Project description:We found that plasmonic Au particles on titanium(iv) oxide (TiO2) act as a visible-light-driven photocatalyst for overall water splitting free from any additives. This is the first report showing that surface plasmon resonance (SPR) in a suspension system effectively induces overall water splitting. Modification with various types of metal nanoparticles as co-catalysts enhanced the evolution of H2 and O2. Among these, Ni-modified Au/TiO2 exhibited 5-times higher rates of H2 and O2 evolution than those of Ni-free Au/TiO2. We succeeded in designing a novel solar energy conversion system including three elemental technologies, charge separation with light harvest and an active site for O2 evolution (plasmonic Au particles), charge transfer from Au to the active site for H2 production (TiO2), and an active site for H2 production (Ni cocatalyst), by taking advantage of a technique for fabricating size-controlled Au and Ni nanoparticles. Water splitting occurred in aqueous suspensions of Ni-modified Au/TiO2 even under irradiation of light through an R-62 filter.
| S-EPMC5431635 | biostudies-literature