Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facile Fabrication of 1-Methylimidazole/Cu Nanozyme with Enhanced Laccase Activity for Fast Degradation and Sensitive Detection of Phenol Compounds.

ABSTRACT: Facile construction of functional nanomaterials with laccase-like activity is important in sustainable chemistry since laccase is featured as an efficient and promising catalyst especially for phenolic degradation but still has the challenges of high cost, low activity, poor stability and unsatisfied recyclability. In this paper, we report a simple method to synthesize nanozymes with enhanced laccase-like activity by the self-assembly of copper ions with various imidazole derivatives. In the case of 1-methylimidazole as the ligand, the as-synthesized nanozyme (denoted as Cu-MIM) has the highest yield and best activity among the nanozymes prepared. Compared to laccase, the K_m of Cu-MIM nanozyme to phenol is much lower, and the v_max is 6.8 times higher. In addition, Cu-MIM maintains excellent stability in a variety of harsh environments, such as high pH, high temperature, high salt concentration, organic solvents and long-term storage. Based on the Cu-MIM nanozyme, we established a method for quantitatively detecting phenol concentration through a smartphone, which is believed to have important applications in environmental protection, pollutant detection and other fields.

SUBMITTER: Lei Y

PROVIDER: S-EPMC9331362 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile Fabrication of a Novel Copper Nanozyme for Efficient Dye Degradation.

Project description:In this study, a novel copper nanozyme (CNZ) was synthesized by a mild way and characterized by scanning electron microscopy and Fourier transform infrared spectroscopy (FTIR). The as-fabricated CNZ exhibited typical peroxidase activity toward 2, 2'-azinodi-(3-ethylbenzthiazoline)-6-sulfonate. We successfully applied CNZ for the degradation of methyl orange pollutants. Under the optimum conditions (pH, 3.0; T, 60 °C; H2O2 concentration, 200 mM; dosage of CNZ, 8 mg), 93% of the degradation rate could be obtained in less than 10 min. Furthermore, the nanozyme exhibited excellent reusability and storage stability. All these experimental results suggested that CNZ is a powerful catalyst for industrial wastewater treatment.

| S-EPMC7948215 | biostudies-literature

Fabrication of Fe3O4@PVA-Cu Nanocomposite and Its Application for Facile and Selective Oxidation of Alcohols.

Project description:Fe3O4@PVA-Cu nanocomposite was introduced as an affordable catalyst for selective oxidation of alcohols into various aldehydes and ketones. The synthesized nanocomposite was characterized by applying essential analyses. The peaks that are appeared in FT-IR spectroscopy confirmed the production of the Fe3O4@PVA-Cu nanocomposite. In addition, EDX analysis proved the presence of oxygen, carbon, iron, and copper elements in the catalyst. Further, TGA analysis showed high thermal stability of the nanocomposite. VSM technique was applied to examine the magnetic property of the nanocomposite. The results demonstrated a high magnetic property in the catalyst, which enables easy separation of it from the reaction solution. TEM and SEM imaging showed the nanoscale size of the particles (~20 nm) in the catalyst. Additionally, XRD data was compatible with that of Fe3O4 nanoparticles. The application of the nanocomposite has been studied in the selective oxidation of alcohols in the presence of acetonitrile as solvent, and hydrogen peroxide as a supplementary oxidizing agent. This technique is remarkably facile and inexpensive. Further, the products showed high yields. In addition, the calculated TON and TOF values indicated the phenomenal efficiency of the nanocomposite in preparation of targeted products.

| S-EPMC7396633 | biostudies-literature

Facile Fabrication of a Highly Sensitive and Robust Flexible Pressure Sensor with Batten Microstructures.

Project description:As the foremost component of wearable devices, flexible pressure sensors require high sensitivity, wide operating ranges, and great stability. In this paper, a pressure sensor comprising a regular batten microstructure active layer is presented. First, the influences of the dimensional parameters of the microstructures on the performances of the sensors were investigated by the mechanical finite element method (FEM). Then, parameters were optimized and determined based on the results of this investigation. Next, active layers were prepared by molding multiwalled carbon nanotube/polyurethane (MWCNT/PU) conductive composite using a printed circuit board template. Finally, a resistive flexible pressure sensor was fabricated by combining an active layer and an interdigital electrode. With advantages in terms of the structure and materials, the sensor exhibited a sensitivity of up to 46.66 kPa-1 in the range of 0-1.5 kPa and up to 6.67 kPa-1 in the range of 1.5-7.5 kPa. The results of the experiments show that the designed flexible pressure sensor can accurately measure small pressures and realize real-time human physiological monitoring. Furthermore, the preparation method has the advantages of a low cost, simple design, and high consistency. Thus, it has potential to promote the development of flexible sensors, wearable devices, and other related devices.

| S-EPMC9329788 | biostudies-literature

A facile approach to create sensitive and selective Cu(ii) sensors on carbon fiber microelectrodes.

Project description:A facile platform derived from deposition of ethynyl linkers on carbon fiber microelectrodes has been developed for sensitive and selective sensing of Cu(ii). This study is the first to demonstrate the successful anodic deposition of ethynyl linkers, specifically 1,4-diethynylbenzene, onto carbon fiber microelectrodes. Multi-scan deposition of DEB on these microelectrodes resulted in an increased sensitivity and selectivity towards Cu(ii) that persists amidst other divalent interferents and displays sustained performance over four days while stored at room temperature. This method can be extended to other ethynyl terminal moieties, thereby creating a versatile chemical platform that will enable improved sensitivity and selectivity for a new frontier of biomarker measurement.

| S-EPMC10652356 | biostudies-literature

Facile Fabrication of Tumor Redox-Sensitive Nanoassemblies of Small-Molecule Oleate Prodrug as Potent Chemotherapeutic Nanomedicine.

Project description:The conjugate of paclitaxel (PTX) and docosahexaenoic acid has entered into clinical trials. However, the most recent clinical outcomes fell short of expectations, due to the extremely slow drug release from the hydrophobic conjugates. Herein, a novel prodrug-based nanoplatform self-assembled by the disulfide bond linked conjugates of PTX and oleic acid for rapid and differential release of PTX in tumor cells is reported. This redox-responsive prodrug-nanosystem demonstrates multiple therapeutic advantages, including one-step facile fabrication, high drug-loading efficiency (56%, w/w), on-demand drug release responding to redox stimuli, as well as favorable cellular uptake and biodistribution. These advantages result in significantly enhanced antitumor efficacy in vivo, with the tumor almost completely disappearing in mice. Such a uniquely engineered prodrug-nanosystem has great potential to be used as potent chemotherapeutic nanomedicine in clinical cancer therapy.

| S-EPMC5206766 | biostudies-literature

Facile Fabrication of Protein-Macrocycle Frameworks.

Project description:Precisely defined protein aggregates, as exemplified by crystals, have applications in functional materials. Consequently, engineered protein assembly is a rapidly growing field. Anionic calix[n]arenes are useful scaffolds that can mold to cationic proteins and induce oligomerization and assembly. Here, we describe protein-calixarene composites obtained via cocrystallization of commercially available sulfonato-calix[8]arene (sclx8) with the symmetric and "neutral" protein RSL. Cocrystallization occurred across a wide range of conditions and protein charge states, from pH 2.2-9.5, resulting in three crystal forms. Cationization of the protein surface at pH ∼ 4 drives calixarene complexation and yielded two types of porous frameworks with pore diameters >3 nm. Both types of framework provide evidence of protein encapsulation by the calixarene. Calixarene-masked proteins act as nodes within the frameworks, displaying octahedral-type coordination in one case. The other framework formed millimeter-scale crystals within hours, without the need for precipitants or specialized equipment. NMR experiments revealed macrocycle-modulated side chain pKa values and suggested a mechanism for pH-triggered assembly. The same low pH framework was generated at high pH with a permanently cationic arginine-enriched RSL variant. Finally, in addition to protein framework fabrication, sclx8 enables de novo structure determination.

| S-EPMC8154523 | biostudies-literature

Facile fabrication of Cu-based alloy nanoparticles encapsulated within hollow octahedral N-doped porous carbon for selective oxidation of hydrocarbons.

Project description:Hollow carbon materials with versatile chemical compositions and complicated shell architectures hold great promise in heterogeneous catalysis. However, it is a daunting challenge to synthesize metal alloy nanoparticles (NPs) supported by hollow nanostructures. Herein, we present a simple approach for facile fabrication of Pd-Cu alloy NPs embedded in hollow octahedral N-doped porous carbon (Pd-Cu@HO-NPC). The hollow material is derived from HKUST-1 coated by an imidazolium-based ionic polymer (ImIP). Water-sensitive HKUST-1 is simultaneously removed in the process of anion exchange between bromide in the ImIP shell and tetrachloropalladate in aqueous medium. The released Cu(ii) ions and exchanged Pd(ii) ions serve as Cu and Pd sources in the subsequent pyrolysis. The resultant Pd-Cu@HO-NPC exhibits high catalytic activity, selectivity, stability and recyclability in the aerobic oxidation of hydrocarbons. More attractively, the synthetic strategy is of excellent generality, and could be extended to the synthesis of Cu-based bimetallic and trimetallic alloy NPs, such as Pt-Cu@HO-NPC and Pd-Pt-Cu@HO-NPC. This work highlights the superiority of water-sensitive metal-organic frameworks in the ingenious design of hollow carbon materials incorporated with well-dispersed metal alloy NPs.

| S-EPMC6263394 | biostudies-literature

Nucleation and Growth-Controlled Facile Fabrication of Gold Nanoporous Structures for Highly Sensitive Surface-Enhanced Raman Spectroscopy Applications.

Project description:The fabrication of porous metal structures usually involves complicated processes such as lithography or etching. In this study, a facile and clean method based on thermal evaporation at high pressure is introduced, by which a highly porous, black colored structure of Au can be formed through the control of homogeneous nucleation and growth during evaporation. The deposited films have different morphologies, from columnar to nanoporous structures, depending on the working pressure. These porous structures consist of Au nanoparticle aggregates, and a large number of nano-gaps are found among the nanoparticles. Thus, these structures indicate a much higher intensity of surface-enhanced Raman spectroscopy (SERS) when compared with commercial SERS substrates. The SERS intensity depends on the working pressure and thickness. Even circumstances that can induce agglomeration of nanoparticle aggregates do not deteriorate the sensitivity of SERS. These nanoporous structures based on high-pressure thermal evaporation are expected to provide a new platform for the development of low-cost and highly sensitive chemical sensors.

| S-EPMC8227128 | biostudies-literature

Facile Cu(I)-catalyzed oxidative coupling of anilines to azo compounds and hydrazines with diaziridinone under mild conditions.

Project description:A mild and highly efficient Cu(I)-catalyzed oxidative coupling of anilines is described. Various primary and secondary anilines can be efficiently coupled under mild conditions to the corresponding azo compounds and hydrazines in high yields. This method provides a direct and practical access to these compounds and is also amenable to gram scale with no special precautions to exclude air or moisture.

| S-EPMC3717407 | biostudies-literature

Facile fabrication of properties-controllable graphene sheet.

Project description:Graphene has been received a considerable amount of attention as a transparent conducting electrode (TCE) which may be able to replace indium tin oxide (ITO) to overcome the significant weakness of the poor flexibility of ITO. Given that graphene is the thinnest 2-dimensional (2D) material known, it shows extremely high flexibility, and its lateral periodic honeycomb structure of sp(2)-bonded carbon atoms enables ~2.3% of incident light absorption per layer. However, there is a trade-off between the electrical resistance and the optical transmittance, and the fixed absorption rate in graphene limits is use when fabricating devices. Therefore, a more efficient method which continuously controls the optical and electrical properties of graphene is needed. Here, we introduce a method which controls the optical transmittance and the electrical resistance of graphene through various thicknesses of the top Cu layers with a Cu/Ni metal catalyst structure used to fabricate a planar mesh pattern of single and multi-layer graphene. We exhibit a continuous transmittance change from 85% (MLG) to 97.6% (SLG) at an incident light wavelength of 550?nm on graphene samples simultaneously grown in a CVD quartz tube. We also investigate the relationships between the sheet resistances.

| S-EPMC4832197 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data