Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hydroxyapatite from Natural Sources for Medical Applications.

ABSTRACT: The aim of this work is to study the physical-chemical, mechanical, and biocompatible properties of hydroxyapatite obtained by hydrothermal synthesis, at relatively low temperatures and high pressures, starting from natural sources (Rapana whelk shells), knowing that these properties influence the behavior of nanostructured materials in cells or tissues. Thus, hydroxyapatite nanopowders were characterized by chemical analysis, Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), scanning electron microscopy (SEM), and X-ray diffraction (XRD). In vitro studies on osteoblast cell lines (cytotoxicity and cell proliferation), as well as preliminary mechanical tests, have been performed. The results showed that the obtained powders have a crystallite size below 50 nm and particle size less than 100 nm, demonstrating that hydrothermal synthesis led to hydroxyapatite nanocrystalline powders, with a Ca:P ratio close to the stoichiometric ratio and a controlled morphology (spherical particle aggregates). The tensile strength of HAp samples sintered at 1100 °C/90 min varies between 37.6-39.1 N/mm². HAp samples sintered at 1300 °C/120 min provide better results for the investigated mechanical properties. The coefficient of friction has an appropriate value for biomechanical applications. The results of cell viability showed that the cytotoxic effect is low for all tested samples. Better cell proliferation is observed for osteoblasts grown on square samples.

SUBMITTER: Cursaru LM

PROVIDER: S-EPMC9331458 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Natural 5-Aminolevulinic Acid: Sources, Biosynthesis, Detection and Applications.

Project description:5-Aminolevulinic acid (5-ALA) is the key precursor for the biosynthesis of tetrapyrrole compounds, with wide applications in medicine, agriculture and other burgeoning fields. Because of its potential applications and disadvantages of chemical synthesis, alternative biotechnological methods have drawn increasing attention. In this review, the recent progress in biosynthetic pathways and regulatory mechanisms of 5-ALA synthesis in biological hosts are summarized. The research progress on 5-ALA biosynthesis via the C4/C5 pathway in microbial cells is emphasized, and the corresponding biotechnological design strategies are highlighted and discussed in detail. In addition, the detection methods and applications of 5-ALA are also reviewed. Finally, perspectives on potential strategies for improving the biosynthesis of 5-ALA and understanding the related mechanisms to further promote its industrial application are conceived and proposed.

| S-EPMC8913508 | biostudies-literature

Peptides, Peptidomimetics, and Polypeptides from Marine Sources: A Wealth of Natural Sources for Pharmaceutical Applications.

Project description:Nature provides a variety of peptides that are expressed in most living species. Evolutionary pressure and natural selection have created and optimized these peptides to bind to receptors with high affinity. Hence, natural resources provide an abundant chemical space to be explored in peptide-based drug discovery. Marine peptides can be extracted by simple solvent extraction techniques. The advancement of analytical techniques has made it possible to obtain pure peptides from natural resources. Extracted peptides have been evaluated as possible therapeutic agents for a wide range of diseases, including antibacterial, antifungal, antidiabetic and anticancer activity as well as cardiovascular and neurotoxin activity. Although marine resources provide thousands of possible peptides, only a few peptides derived from marine sources have reached the pharmaceutical market. This review focuses on some of the peptides derived from marine sources in the past ten years and gives a brief review of those that are currently in clinical trials or on the market.

| S-EPMC5408270 | biostudies-literature

Natural Antibiotic Oregano in Hydroxyapatite-Coated Titanium Reduces Osteoclastic Bone Resorption for Orthopedic and Dental Applications.

Project description:Traditional infection prevention and treatment methods include synthetic antibiotics, which can cause severe adverse side effects. Carvacrol and thymol are biologically active monoterpenoid extractants from oregano leaves with antibiotic capabilities; however, little is known regarding their effects on bone tissue engineering. The objective of this work is to understand their effects on osteogenesis, specifically with osteoblast and osteoclast cells, from surface-modified Ti6Al4V with plasma sprayed hydroxyapatite (HA) coatings. This system is an alternative to cemented implants to aid in bone healing. Results reveal that full carvacrol release from the HA matrix is successful in aqueous environments and modulation of release kinetics can also be made using polycaprolactone (PCL) and polyethylene glycol (PEG) polymers. From HA-pressed disc samples in physiological pH, full carvacrol release is achieved in 10 days using PCL/PEG, about 95% release in 50 days using no polymer, and 60% in 50 days when using a PCL coating. Without polymer, full carvacrol release is achieved after 3 days from HA coatings in both physiological pH and acidic pH, mimicking the post-surgery environment. The release is assessed as a diffusion-based mechanism in phosphate-buffered saline but degradation-based mechanism in acetate buffer solution. Carvacrol and thymol show bacterial inhibition of Staphylococcus epidermidis and no cytotoxic effects on osteoblast proliferation in vitro. Carvacrol and thymol also induce a significant 7% reduction in osteoclast tartrate-resistant acid phosphatase (TRAP) activity, caused by poorly attached cellular morphologies, leading to an approximately 65% reduction in osteoclast resorption pit formation. Our goal is to demonstrate a natural medicinal system that can support bone healing while providing infection prevention and reducing costly revision surgeries for orthopedic and dental applications.

| S-EPMC8009490 | biostudies-literature

New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers.

Project description:New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

| S-EPMC7180755 | biostudies-literature

Microfluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications.

Project description:Among the several possible uses of nanoparticulated systems in biomedicine, their potential as theragnostic agents has received significant interest in recent times. In this work, we have taken advantage of the medical applications of Gadolinium as a contrast agent with the versatility and huge array of possibilities that microfluidics can help to create doped Hydroxyapatite nanoparticles with magnetic properties in an efficient and functional way. First, with the help of Computational Fluid Dynamics (CFD), we performed a complete and precise study of all the elements and phases of our device to guarantee that our microfluidic system worked in the laminar regime and was not affected by the presence of nanoparticles through the flow requisite that is essential to guarantee homogeneous diffusion between the elements or phases in play. Then the obtained biomaterials were physiochemically characterized by means of XRD, FE-SEM, EDX, confocal Raman microscopy, and FT-IR, confirming the successful incorporation of the lanthanide element Gadolinium in part of the Ca (II) binding sites. Finally, the magnetic characterization confirmed the paramagnetic behaviour of the nanoparticles, demonstrating that, with a simple and automatized system, it is possible to obtain advanced nanomaterials that can offer a promising and innovative solution in theragnostic applications.

| S-EPMC9921701 | biostudies-literature

Natural sources and encapsulating materials for probiotics delivery systems: Recent applications and challenges in functional food development.

Project description:Probiotics are known as the live microorganisms which upon adequate administration elicit a health beneficial response inside the host by decreasing the luminal pH, eliminating the pathogenic bacteria in the gut as well as producing short chain fatty acids (SCFA). With advancements in research; probiotics have been explored as potential ingredients in foods. However, their use and applications in food industry have been limited due to restrictions of maintaining the viability of probiotic cells and targeting the successful delivery to gut. Encapsulation techniques have significant influence on increasing the viability rates of probiotic cells with the successful delivery of cells to the target site. Moreover, encapsulating techniques also prevent the live cells from harsh physiological conditions of gut. This review discusses several encapsulating techniques as well as materials derived from natural sources and nutraceutical compounds. In addition to this, this paper also comprehensively discusses the factors affecting the probiotics viability and evaluation of successful release and survival of probiotics under simulated gastric, intestinal conditions as well as bile, acid tolerant conditions. Lastly applications and challenges of using encapsulated bacteria in food industry for the development of novel functional foods have also been discussed in detail too. Future studies must include investigating the use of encapsulated bacterial formulations in in-vivo models for effective health beneficial properties as well as exploring the mechanisms behind the successful release of these formulations in gut, hence helping us to understand the encapsulation of probiotic cells in a meticulous manner.

| S-EPMC9534265 | biostudies-literature

Copper Nanocluster-Doped Luminescent Hydroxyapatite Nanoparticles for Antibacterial and Antibiofilm Applications.

Project description:Novel strategies in the field of nanotechnology for the development of suitable multifunctional drug delivery vehicles have been pursued with promising upshots. Luminescent copper nanocluster-doped hydroxyapatite nanoparticles (HAP NPs) were synthesized and applied for the delivery of antibacterial drug kanamycin. The negatively charged doped HAP NPs could electrostatically interact with the positively charged kanamycin. The kanamycin-loaded doped HAP NPs showed pronounced activity in the case of Gram-negative bacteria compared to that in Gram-positive bacteria. Upon interaction with the bacteria, kanamycin could probably generate harmful agents such as hydroxyl radical that leads to bacterial cell damage. After being incorporated with copper nanoclusters (Cu NCs), the doped HAP NPs were applied for the bioimaging of bacterial cells. The biocompatibility of doped HAP NPs was also studied in HeLa cells. As compared to copper nanoclusters, the doped HAP NPs showed excellent biocompatibility even at higher concentrations of copper. The kanamycin-loaded doped HAP NPs were further applied toward Pseudomonas aeruginosa biofilm eradication. Thus, the as-synthesized copper nanocluster-doped HAP NPs were applied as nanocarriers for antibiotic drug delivery, bioimaging, and antibiofilm applications.

| S-EPMC6648608 | biostudies-literature

Multifunctional Hydroxyapatite/Silver Nanoparticles/Cotton Gauze for Antimicrobial and Biomedical Applications.

Project description:Medical textiles have played an increasingly important protection role in the healthcare industry. This study was aimed at improving the conventional cotton gauze for achieving advanced biomedical specifications (coloration, UV-protection, anti-inflammation, and antimicrobial activities). These features were obtained by modifying the cotton gauze fabrics via in-situ precipitation of hydroxyapatite nanoparticles (HAp NP), followed by in-situ photosynthesis of silver (Ag) NPs with ginger oil as a green reductant with anti-inflammation properties. The HAp-Ag NPs coating provides good UV-protection properties. To further improve the HAp and Ag NPs dispersion and adhesion on the surface, the cotton gauze fabrics were modified by cationization with chitosan, or by partial carboxymethylation (anionic modification). The influence of the cationic and anionic modifications and HAp and Ag NPs deposition on the cotton gauze properties (coloration, UV-protection, antimicrobial activities, and water absorption) was thoroughly assessed. Overall, the results indicate that chemical (anionic and cationic) modification of the cotton gauze enhances HAp and Ag NPs deposition. Chitosan can increase biocompatibility and promotes wound healing properties of cotton gauze. Ag NP deposition onto cotton gauze fabrics brought high antimicrobial activities against Candida albicans, Gram-positive and Gram-negative bacteria, and improved UV protection.

| S-EPMC7915402 | biostudies-literature

Adverse biophysical effects of hydroxyapatite nanoparticles on natural pulmonary surfactant.

Project description:Inhaled nanoparticles (NPs) must first interact with the pulmonary surfactant (PS) lining layer that covers the entire internal surface of the respiratory tract and plays an important role in surface tension reduction and host defense. Interactions with the PS film determine the subsequent clearance, retention, and translocation of the inhaled NPs and hence their potential toxicity. To date, little is known how NPs interact with PS, and whether or not NPs have adverse effects on the biophysical function of PS. We found a time-dependent toxicological effect of hydroxyapatite NPs (HA-NPs) on a natural PS, Infasurf, and the time scale of surfactant inhibition after particle exposure was comparable to the turnover period of surfactant metabolism. Using a variety of in vitro biophysicochemical characterization techniques, we have determined the inhibition mechanism to be due to protein adsorption onto the HA-NPs. Consequently, depletion of surfactant proteins from phospholipid vesicles caused conversion of original large vesicles into much smaller vesicles with poor surface activity. These small vesicles, in turn, inhibited biophysical function of surfactant films after adsorption at the air-water interface. Cytotoxicity study found that the HA-NPs at the studied concentration were benign to human bronchial epithelial cells, thereby highlighting the importance of evaluating biophysical effect of NPs on PS. The NP-PS interaction mechanism revealed by this study may not only provide new insight into the toxicological study of nanoparticles but also shed light on the feasibility of NP-based pulmonary drug delivery.

| S-EPMC4854525 | biostudies-literature

MLR and ANN Approaches for Prediction of Synthetic/Natural Nanofibers Diameter in the Environmental and Medical Applications.

Project description:Fiber diameter plays an important role in the properties of electrospinning of nanofibers. However, one major problem is the lack of a comprehensive method that can link processing parameters to nanofibers' diameter. The objective of this study is to develope an artificial neural network (ANN) modeling and multiple regression (MLR) analysis approaches to predict the diameter of nanofibers. Processing parameters, including weight ratio, voltage, injection rate, and distance, were considered as independent variables and the nanofiber diameter as the dependent variable of the ANN model. The results of ANN modeling, especially its high accuracy (R2?=?0.959) in comparison with MLR results (R2?=?0.564), introduced the prediction the diameter of nanofibers model (PDNFM) as a comparative model for predicting the diameter of poly (3-caprolactone) (PCL)/gelatin (Gt) nanofibers. According to the result of sensitivity analysis of the model, the values of weight ratio, distance, injection rate, and voltage, respectively, were identified as the most significant parameters which influence PDNFM.

| S-EPMC7229181 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data