Dataset Information

Characterization of Dissolved Organic Matter in Solar Ponds by Elemental Analysis, Infrared Spectroscopy, Nuclear Magnetic Resonance and Pyrolysis-GC-MS.

ABSTRACT: The abundance and chemical composition of dissolved organic matter (DOM) in the brine of solar ponds affect the efficiency of mineral extraction and evaporation rates of the brine, and cause undesired odor and color of the products. Here, we report an investigation into the composition and changes of DOM in solar ponds from Salt Lake brine with multiple complementary analysis techniques. The results showed that the DOM derived from Salt Lake brine was primarily composed of carbohydrates, aliphatic and aromatic compounds. The concentrations of dissolved organic carbon in solar ponds increased with exposure time by up to 15-fold (from 23.4 to 330.8 mg/L) upon evaporation/irradiation of Salt Lake brine. Further qualitative analyses suggest that the relative abundance of aliphatic compounds (including functionalized ones) increased from 49.5% to 59.2% in the solar pond process, while the opposite was observed for carboxylic acid moieties, aromatics and carbohydrates, which decreased from 15.7%, 7.1% and 26.1% to 13.4%, 5.3% and 23.0%, respectively. The pyrolysis-gas chromatography-mass spectrometry results reveal that the presence of some sulfur-containing organics implied some anaerobic biotic decay, but microbiological processes were probably subordinate to photo-induced DOM transformations. In the Salt Lake brine, exposure-driven decay decreased the abundance of polysaccharides and increased that of mono- and polyaromatic pyrolysis products. Our results here provide new insights for better understanding the changes of DOM chemical composition in the solar ponds of Salt Lake brine.

SUBMITTER: Yang K

PROVIDER: S-EPMC9331927 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:In the times of Covid-19, face masks are considered to be the main source of protection against the virus that reduces its spread. These masks are classified as single-use medical products with a very short service life, estimated at few days, hence millions of contaminated masks are generated daily in the form of hazardous materials, what requires to develop a safe method to dispose of them, especially since some of them are loaded with viruses. 3-ply face masks (3PFM) represent the major fraction of this waste and are composed mainly from polypropylene and melt blown filter with high content of volatile substances (96.6 wt.%), what makes pyrolysis treatment an emerging technology that could be used to dispose of face masks and convert them into energy products. In this context, this work aims to study pyrolysis kinetic behaviour and TG-FTIR-GC-MS analysis of 3PFM. The research started with analysis of 3PFM using elemental analysis, proximate analysis, and compositional analyses. Afterwards, TG-FTIR system was used to study the thermal and chemical decomposition of 3PFM analyzed at different heating rates: 5, 10, 15, 20, 25, and 30 °C/min. The GC/MS system was used to observe the synthesized volatile products at the maximum decomposition temperatures. After that, isoconversional methods, the advanced nonlinear integral isoconversional method, and the iterative linear integral isoconversional method were used to determine the activation energies of mask pyrolysis, while the distributed activation energy model and the independent parallel reactions kinetic model were used to fit TGA and DTG curves with deviations below <1. The TGA-DTG results showed that 3PFM can decompose in three different periods with a total weight loss of 95 % and maximum decomposition in the range 405-510 °C, while the FTIR spectra and GC-MS analysis exhibited that - C-H (aromatic and aliphatic) and 2,4-Dimethyl-1-heptene (28-43 % based on heating rate) represented the major compounds in the released volatile components. Finally, Vyazovkin and the iterative linear integral isoconversional methods gave activation energies almost similar to that obtained by the KAS isoconversional method.

Project description:(1) Background: The ability to determine the age of ginseng is very important because the price of ginseng depends on the cultivation period. Since morphological observation is subjective, a new scientific and systematic method for determining the age of ginseng is required. (2) Methods: Three techniques were used for a metabolomics approach. High-resolution magic-angle-spinning nuclear magnetic resonance (HR-MAS NMR) spectroscopy was used to analyze powdered ginseng samples without extraction. Ultrahigh-performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS) and gas chromatography quadrupole time-of-fight mass spectrometry (GC-TOF/MS) were used to analyze the extracts of 4-, 5-, and 6-year-old ginseng. (3) Results: A metabolomics approach has the potential to discriminate the age of ginseng. Among the primary metabolites detected from NMR spectroscopy, the levels of fumarate and choline showed moderate prediction with an area under the curve (AUC) value of more than 0.7. As a result of UPLC-QTOF/MS-based profiling, 61 metabolites referring to the VIP (variable importance in the projection) score contributed to discriminating the age of ginseng. The results of GC×GC-TOF/MS showed clear discrimination of 4-, 5-, and 6-year-old ginseng using orthogonal partial least-squares discriminant analysis (OPLS-DA) to 100% of the discrimination rate. The results of receiver operating characteristic (ROC) analysis, 16 metabolites between 4- and 5-year-old ginseng, and 18 metabolites between 5- and 6-year-old ginseng contributed to age discrimination in all regions. (4) Conclusions: These results showed that metabolic profiling and multivariate statistical analyses can distinguish the age of ginseng. Especially, it is meaningful that ginseng samples from different areas had the same metabolites for age discrimination. In future studies, it will be necessary to identify the unknown variables and to collaboratively study with other fields the biochemistry of aging in ginseng.

Project description:In general, the greater the number of directly linked nitrogen atoms in a molecule, the better its energetic performance, while the stability will be accordingly lower. But 1,1'-azobis-1,2,3-triazole (1) and 4,4'-azobis-1,2,4-triazole (2) show remarkable properties, such as high enthalpies of formation, high melting points, and relatively high stabilities. In order to rationalize this unexpected behavior of the two compounds, it is necessary to study their thermal decompositions and pyrolyses. Although a great deal of research has been focused on the synthesis and characterization of energetic materials with 1 and 2 as the backbone, a complete report on their fundamental thermodynamic parameters and thermal decomposition properties has not been published.Thermogravimetric-differential scanning calorimetry were used to obtain the thermal decomposition data of the title compounds. Kissinger and Ozawa-Doyle methods, the two selected non-isothermal methods, are presented for analysis of the solid-state kinetic data. Pyrolysis-gas chromatography/mass spectrometry was used to study the pyrolysis process of the title compounds.The DSC curves show that the thermal decompositions of 1 and 2 are at different heating rates involved a single exothermic process. The TG curves provide insight into the total weight losses from the compounds associated with this process. At different pyrolysis temperatures, the compositions and types of the pyrolysis products differ greatly and the pyrolysis reaction at 500 °C is more thorough than 400 °C.Apparent activation energies (E) and pre-exponential factors (lnA/s-1) are 291.4 kJ mol-1 and 75.53 for 1; 396.2 kJ mol-1 and 80.98 for 2 (Kissinger). The values of E are 284.5 kJ mol-1 for 1 and 386.1 kJ mol-1 for 2 (Ozawa-Doyle). The critical temperature of thermal explosion (T b ) is evaluated as 187.01 °C for 1 and 282.78 °C for 2. The title compounds were broken into small fragment ions under the pyrolysis conditions, which then might undergo a multitude of collisions and numerous other reactions, resulting in the formation of C2N2 (m/z 52), etc., before being analyzed by the GC/MS system.

Dataset Information

Characterization of Dissolved Organic Matter in Solar Ponds by Elemental Analysis, Infrared Spectroscopy, Nuclear Magnetic Resonance and Pyrolysis-GC-MS.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets