Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Downstream Processing of Amorphous and Co-Amorphous Olanzapine Powder Blends.

ABSTRACT: The work evaluates the stability of amorphous and co-amorphous olanzapine (OLZ) in tablets manufactured by direct compression. The flowability and the compressibility of amorphous and co-amorphous OLZ with saccharin (SAC) and the properties of the tablets obtained were measured and compared to those of tablets made with crystalline OLZ. The flowability of the amorphous and mostly of the co-amorphous OLZ powders decreased in comparison with the crystalline OLZ due to the higher cohesiveness of the former materials. The stability of the amorphous and co-amorphous OLZ prior to and after tableting was monitored by XRPD, FTIR, and NIR spectroscopies. Tablets presented long-lasting amorphous OLZ with enhanced water solubility, but the release rate of the drug decreased in comparison with tablets containing crystalline OLZ. In physical mixtures made of crystalline OLZ and SAC, an extent of amorphization of approximately 20% was accomplished through the application of compaction pressures and dwell times of 155 MPa and 5 min, respectively. The work highlighted the stability of amorphous and co-amorphous OLZ during tableting and the positive effect of compaction pressure on the formation of co-amorphous OLZ, providing an expedited amorphization technique, given that the process development-associated hurdles were overcome.

SUBMITTER: da Costa NF

PROVIDER: S-EPMC9332588 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Combining Co-Amorphous-Based Spray Drying with Inert Carriers to Achieve Improved Bioavailability and Excellent Downstream Manufacturability.

Project description:It is crucial to improve poorly water-soluble orally administered drugs through both preclinical and therapeutic drug discovery. A co-amorphous formulation consisting of two low molecular weight (MW) molecules offers a solubility/dissolubility advantage over its crystalline form by maintaining their amorphous status. Here, we report on a co-amorphous solid dispersion (SD) system that includes inert carriers (lactose monohydrate or microcrystalline cellulose) and co-amorphous sacubitril (SAC)-valsartan (VAL) using the spray drying process. The strong molecular interactions between drugs were the driving force for forming robust co-amorphous SDs. Our system provided the highest solubility with more than ~11.5- and 3.12-times solubility increases when compared with the physical mixtures. Co-amorphous lactose monohydrate (LM) SDs showed better bioavailability of APIs (~356.27.8% and 154.01% for the relative bioavailability of LBQ 657 and valsartan, respectively). Co-amorphous inert carrier SDs possessed an excellent compressibility for the production of a direct compression pharmaceutical product. In conclusion, these brand-new co-amorphous SDs could reduce the number of unit processes to produce a final pharmaceutical product for downstream manufacturability.

| S-EPMC7695141 | biostudies-literature

Downstream Processing of Itraconazole:HPMCAS Amorphous Solid Dispersion: From Hot-Melt Extrudate to Tablet Using a Quality by Design Approach.

Project description:The downstream processing of hot-melt extruded amorphous solid dispersions (ASDs) into tablets is challenging due to the low tabletability of milled ASDs. Typically, the extrudate strand is sized before milling, as the strand cannot be fed directly into the milling system. At the lab scale, the strand can be sized by hand-cutting before milling. For scaling up, pelletizers or chill roll and flaker systems can be used to break strands. Due to the different techniques used, differences in milling and tablet compaction are to be expected. We present a systematic study of the milling and tableting of an extruded ASD of itraconazole with hypromellose acetate succinate (HPMCAS) as a carrier polymer. The strand was sized using different techniques at the end of the extruder barrel (hand-cutting, pelletizer, or chill roll and flaker) before being milled at varying milling speeds with varying screen sizes. The effects of these variables (sizing technology, milling speed, and screen size) on the critical quality attributes (CQAs) of the milled ASD, such as yield, mean particle size (D50), tablet compaction characteristics, and tablet dissolution, were established using response surface methodology. It was found that the CQAs varied according to sizing technology, with chill roll flakes showing the highest percentage yield, the lowest D50, and the highest tabletability and dissolution rate for itraconazole. Pearson correlation coefficient tests indicated D50 as the most important CQA related to tabletability and dissolution. For certain milling conditions, the milling of hand-cut filaments results in similar particle size distributions (PSDs) to the milling of pellets or chill roll flakes.

| S-EPMC9323274 | biostudies-literature

Triple-junction hybrid tandem solar cells with amorphous silicon and polymer-fullerene blends.

Project description:Organic-inorganic hybrid tandem solar cells attract a considerable amount of attention due to their potential for realizing high efficiency photovoltaic devices at a low cost. Here, highly efficient triple-junction (TJ) hybrid tandem solar cells consisting of a double-junction (DJ) amorphous silicon (a-Si) cell and an organic photovoltaic (OPV) rear cell were developed. In order to design the TJ device in a logical manner, a simulation was carried out based on optical absorption and internal quantum efficiency. In the TJ architecture, the high-energy photons were utilized in a more efficient way than in the previously reported a-Si/OPV DJ devices, leading to a significant improvement in the overall efficiency by means of a voltage gain. The interface engineering such as tin-doped In2O3 deposition as an interlayer and its UV-ozone treatment resulted in the further improvement in the performance of the TJ solar cells. As a result, a power conversion efficiency of 7.81% was achieved with an open-circuit voltage of 2.35 V. The wavelength-resolved absorption profile provides deeper insight into the detailed optical response of the TJ hybrid solar cells.

| S-EPMC4239567 | biostudies-literature

Optimizing Solvent Selection and Processing Conditions to Generate High Bulk-Density, Co-Precipitated Amorphous Dispersions of Posaconazole.

Project description:Co-precipitation is an emerging method to generate amorphous solid dispersions (ASDs), notable for its ability to enable the production of ASDs containing pharmaceuticals with thermal instability and limited solubility. As is true for spray drying and other unit operations to generate amorphous materials, changes in processing conditions during co-precipitation, such as solvent selection, can have a significant impact on the molecular and bulk powder properties of co-precipitated amorphous dispersions (cPAD). Using posaconazole as a model API, this work investigates how solvent selection can be leveraged to mitigate crystallization and maximize bulk density for precipitated amorphous dispersions. A precipitation process is developed to generate high-bulk-density amorphous dispersions. Insights from this system provide a mechanistic rationale to control the solid-state and bulk powder properties of amorphous dispersions.

| S-EPMC8705469 | biostudies-literature

Exploring the Processing Potential of Polylactic Acid, Polyhydroxyalkanoate, and Poly(butylene succinate-<i>co</i>-adipate) Binary and Ternary Blends.

Project description:Biodegradable and bio-based polymers, including polyhydroxyalkanoate (PHA), polylactic acid (PLA), and poly(butylene succinate-co-adipate) (PBSA), stand out as sustainable alternatives to traditional petroleum-based plastics for a wide range of consumer applications. Studying binary and ternary blends is essential to exploring the synergistic combinations and efficiencies of three distinct biopolyesters. A comprehensive evaluation of melt-extruded binary and ternary polymer blends of PHA, PLA, and PBSA was conducted. Scanning electron microscopy (SEM) analyses revealed a heterogeneous morphology characteristic of immiscible blends, with a predominant spherical inclusion morphology observed in the majority of the blends. An increased PBSA concentration led to an elevation in melt viscosity and elasticity across both ternary and binary blends. An increased PHA content reduced the viscosity, along with both storage and loss moduli in the blends. Moreover, a rise in PHA concentration within the blends led to increased crystallinity, albeit with a noticeable reduction in the crystallization temperature of PHA. PLA retained amorphous structure in the blends. The resultant bio-based blends manifested enhanced rheological and calorimetric traits, divergent from their pure polymer counterparts, highlighting the potential for optimizing material properties through strategic formulation adjustments.

| S-EPMC11360580 | biostudies-literature

Controlled rejuvenation of amorphous metals with thermal processing.

Project description:Rejuvenation is the configurational excitation of amorphous materials and is one of the more promising approaches for improving the deformability of amorphous metals that usually exhibit macroscopic brittle fracture modes. Here, we propose a method to control the level of rejuvenation through systematic thermal processing and clarify the crucial feasibility conditions by means of molecular dynamics simulations of annealing and quenching. We also experimentally demonstrate rejuvenation level control in Zr(55)Al(10)Ni(5)Cu(30) bulk metallic glass. Our local heat-treatment recipe (rising temperature above 1.1T(g), followed by a temperature quench rate exceeding the previous) opens avenue to modifying the glass properties after it has been cast and processed into near component shape, where a higher local cooling rate may be afforded by for example transient laser heating, adding spatial control and great flexibility to the processing.

| S-EPMC4443766 | biostudies-literature

Electrospinning of PCL-Based Blends: Processing Optimization for Their Scalable Production.

Project description:In this work poly(ε-caprolactone) (PCL) based electrospun mats were prepared by blending PCL with microcrystalline cellulose (MCC) and poly(3-hydroxybutyrate) (PHB). The electrospinning processing parameters were firstly optimized with the aim to obtain scalable PCL-based electrospun mats to be used in the industrial sector. Neat PCL as well as PCL-MCC and PCL-PHB based mats in different proportions (99:1; 95:5; 90:10) were prepared. A complete morphological, thermal and mechanical characterization of the developed materials was carried out. Scanning electron microscopy (SEM) observations showed that the addition of PHB to the PCL matrix considerably reduced the formation of beads. Both the addition of MCC and PHB reduced the thermal stability of PCL, but obtained materials with enough thermal stability for the intended use. The electrospun PCL fibers show greatly reduced flexibility with respect to the PCL bulk material, however when PCL is blended with PHB their stretchability is increased, changing their elongation at break from 35% to 70% when 10 wt% of PHB is blended with PCL. However, the mechanical response of the different blends increases with respect to the neat electrospun PCL, offering the possibility to modulate their properties according to the required industrial applications.

| S-EPMC7504022 | biostudies-literature

Preparation of Co-Amorphous Systems by Freeze-Drying.

Project description:Freeze-drying was evaluated as a production technique for co-amorphous systems of a poorly water-soluble drug. Naproxen was freeze-dried together with arginine and lysine as co-former. To increase the solubility of naproxen in the starting solution, the applicability of five surfactants was investigated, namely sodium dodecyl sulfate, pluronic F-127, polyoxyethylene (40) stearate, tween 20 and TPGS 1000. The influence of the surfactant type, surfactant concentration and total solid content to be freeze-dried on the solid state of the sample was investigated. X-ray powder diffraction and differential scanning calorimetry showed that the majority of systems formed co-amorphous one-phase systems. However, at higher surfactant concentrations, and depending on the surfactant type, surfactant reflections were observed in the XRPD analysis upon production. Crystallization of both naproxen and amino acid occurred from some combinations under storage. In conclusion, freeze-drying was shown to be a feasible technique for the production of a selection of co-amorphous drug-amino acid formulations.

| S-EPMC7599809 | biostudies-literature

Introduction to Pharmaceutical Co-amorphous Systems Using a Green Co-milling Technique

Project description:The concept of co-amorphous systems is introduced in

| S-EPMC10100544 | biostudies-literature

Water vapor sorption and glass transition temperatures of phase-separated amorphous blends of hydrophobically-modified starch and sucrose.

Project description:This article contains water vapor sorption data obtained on amorphous blends of octenyl succinic acid-modified (denoted as hydrophobically modified starch; HMS) and sucrose (S) in the anhydrous weight HMS/S ratios between 100/0 and 27/75. The water vapor sorption data was obtained gravimetrically. The amorphous state of the blends was confirmed by X-ray diffraction. The glass transition temperatures of the phase-separated blends are listed; the blends show phase separation into a sucrose-rich phase and a HMS-rich phase, the composition of which varies with the blend ratios. The sucrose-rich phase is characterized by a glass transition temperature T g,lower that is 40 to 90?K lower than the glass transition temperature T g,upper of the HMS-rich phase.

| S-EPMC6172412 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data