Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Environmentally adaptive MOF-based device enables continuous self-optimizing atmospheric water harvesting

ABSTRACT: Harvesting water vapor from desert, arid environments by metal-organic framework (MOF) based devices to deliver clean liquid water is critically dependent on environment and climate conditions. However, reported devices have yet been developed to adapt in real-time to such conditions during their operation, which severely limits water production efficiency and unnecessarily increases power consumption. Herein, we report and detail a mode of water harvesting operation, termed ‘adaptive water harvesting’, from which a MOF-based device is proven capable of adapting the adsorption and desorption phases of its water harvesting cycle to weather fluctuations throughout a given day, week, and month such that its water production efficiency is continuously optimized. In performance evaluation experiments in a desert, arid climate (17–32% relative humidity), the adaptive water harvesting device achieves a 169% increase in water production (3.5 LH2O kgMOF−1 d−1) when compared to the best-performing, reported active device (0.7–1.3 LH2O kgMOF−1 d−1 at 10–32% relative humidity), a lower power consumption (1.67–5.25 kWh LH2O−1), and saves time by requiring nearly 1.5 cycles less than a counterpart active device. Furthermore, the produced water meets the national drinking standards of a potential technology-adopting country. Atmospheric water harvesting by MOF-based devices is critically dependent on weather conditions. Here, the authors report a MOF-based adaptive water harvesting system capable of adapting its cycles to temperature and relative humidity fluctuations throughout the day, continuously optimizing water production.

SUBMITTER: Almassad H

PROVIDER: S-EPMC9391386 | biostudies-literature | 2022 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

MOF Linker Extension Strategy for Enhanced Atmospheric Water Harvesting.

Project description:A linker extension strategy for generating metal-organic frameworks (MOFs) with superior moisture-capturing properties is presented. Applying this design approach involving experiment and computation results in MOF-LA2-1 {[Al(OH)(PZVDC)], where PZVDC2- is (E)-5-(2-carboxylatovinyl)-1H-pyrazole-3-carboxylate}, which exhibits an approximately 50% water capacity increase compared to the state-of-the-art water-harvesting material MOF-303. The power of this approach is the increase in pore volume while retaining the ability of the MOF to harvest water in arid environments under long-term uptake and release cycling, as well as affording a reduction in regeneration heat and temperature. Density functional theory calculations and Monte Carlo simulations give detailed insight pertaining to framework structure, water interactions within its pores, and the resulting water sorption isotherm.

| S-EPMC10037441 | biostudies-literature

Adsorption-based atmospheric water harvesting device for arid climates.

Project description:Water scarcity is a particularly severe challenge in arid and desert climates. While a substantial amount of water is present in the form of vapour in the atmosphere, harvesting this water by state-of-the-art dewing technology can be extremely energy intensive and impractical, particularly when the relative humidity (RH) is low (i.e., below ~40% RH). In contrast, atmospheric water generators that utilise sorbents enable capture of vapour at low RH conditions and can be driven by the abundant source of solar-thermal energy with higher efficiency. Here, we demonstrate an air-cooled sorbent-based atmospheric water harvesting device using the metal-organic framework (MOF)-801 [Zr6O4(OH)4(fumarate)6] operating in an exceptionally arid climate (10-40% RH) and sub-zero dew points (Tempe, Arizona, USA) with a thermal efficiency (solar input to water conversion) of ~14%. We predict that this device delivered over 0.25 L of water per kg of MOF for a single daily cycle.

| S-EPMC5864962 | biostudies-literature

Autonomous atmospheric water seeping MOF matrix.

Project description:The atmosphere contains an abundance of fresh water, but this resource has yet to be harvested efficiently. To date, passive atmospheric water sorbents have required a desorption step that relies on steady solar irradiation. Since the availability and intensity of solar radiation vary, these limit on-demand desorption and hence the amount of harvestable water. Here, we report a polymer-metal-organic framework that provides simultaneous and uninterrupted sorption and release of atmospheric water. The adaptable nature of the hydro-active polymer, and its hybridization with a metal-organic framework, enables enhanced sorption kinetics, water uptake, and spontaneous water oozing. We demonstrate continuous water delivery for 1440 hours, producing 6 g of fresh water per gram of sorbent at 90% relative humidity (RH) per day without active condensation. This leads to a total liquid delivery efficiency of 95% and an autonomous liquid delivery efficiency of 71%, the record among reported atmospheric water harvesters.

| S-EPMC7567601 | biostudies-literature

Enhanced continuous atmospheric water harvesting with scalable hygroscopic gel driven by natural sunlight and wind.

Project description:Sorption-based atmospheric water harvesting (SAWH) has received unprecedented attention as a future water and energy platform. However, the water productivity of SAWH systems is still constrained by the slow sorption kinetics at material and component levels and inefficient condensation. Here, we report a facile method to prepare hygroscopic interconnected porous gel (HIPG) with fast sorption-desorption kinetics, high scalability and stability, and strong adhesion property for highly efficient SAWH. We further design a solar-wind coupling driven SAWH device with collaborative heat and mass enhancement achieving continuous water production. Concentrated sunlight contributes to enhancing the desorption and condensation synergistically, and natural wind is introduced to drive the device operation and improve the sorption kinetics. The device demonstrated record high working performance of 14.9 Lwater m-2 day-1 and thermal efficiency of 25.7% in indoor experiments and 3.5-8.9 Lwater m-2 day-1 in outdoor experiments by solar concentration without any other energy consumption. This work provides an up-and-coming pathway to realize highly efficient and sustainable clean water supply for off-grid and arid regions.

| S-EPMC11372108 | biostudies-literature

Reversible Atmospheric Water Harvesting Using Metal-Organic Frameworks.

Project description:The passive capture of clean water from humid air without reliance on bulky equipment and high energy has been a substantial challenge and has attracted significant interest as a potential environmentally friendly alternative to traditional water harvesting methods. Metal-organic frameworks (MOFs) offer a high potential for this application due to their structural versatility which permits scalable, facile modulations of structural and functional elements. Although MOFs are promising materials for water harvesting, little research has been done to address the microstructure-adsorbing characteristics relationship with respect to the dynamic adsorption-desorption process. In this article, we present a parametric study of nine hydrolytically stable MOFs with diverse structures for unraveling fundamental material properties that govern the kinetics of water sequestration in this class of materials as well as investigating overall uptake capacity gravimetrically. The effects of temperature, relative humidity, and powder bed thickness on the adsorption-desorption process are explored for achieving optimal operational parameters. We found that Zr-MOF-808 can produce up to 8.66 LH2O kg-1MOF day-1, an extraordinary finding that outperforms any previously reported values for MOF-based systems. The presented findings help to deepen our understanding and guide the discovery of next-generation water harvesting materials.

| S-EPMC6992632 | biostudies-literature

Techno-Economic Analysis of Atmospheric Water Harvesting Across Climates.

Project description:Drinking water scarcity is a global challenge as groundwater and surface water availability diminishes. The atmosphere is an alternative freshwater reservoir that has universal availability and could be harvested as drinking water. In order to effectively perform atmospheric water harvesting (AWH), we need to (1) understand how different climate regions (e.g., arid, temperate, and tropical) drive the amount of water that can be harvested and (2) determine the cost to purchase, operate, and power AWH. This research pairs thermodynamics with techno-economic analysis to calculate the water productivity and cost breakdown of a representative condensation-based AWH unit with water treatment. We calculate the monthly and annual levelized cost of water from AWH as a function of climate and power source (grid electricity vs renewable energy from solar photovoltaics (PV)). In our modeled unit, AWH can provide 1744-2710 L/month in a tropical climate, 394-1983 L/month in a temperate climate, and 37-1470 L/month in an arid climate. The levelized cost of water of AWH powered by the electrical grid is $0.06/L in a tropical climate, $0.09/L in a temperate climate, and $0.17/L in an arid climate. If off-grid solar PV was purchased at the time of purchasing the AWH unit to power the AWH, the costs increase to $0.40/L in an arid climate, $0.17/L in a temperate climate, and $0.10/L in a tropical climate. However, if using existing solar PV there are potential cost reductions of 4.25-5-fold between purchasing and using existing solar PV, and 2-3-fold between using the electrical grid and existing solar PV, with the highest cost reductions occurring in the tropical climate. Using existing solar PV, the levelized cost of AWH is $0.09/L in an arid climate, $0.04/L in a temperate climate, and $0.02/L in a tropical climate.

| S-EPMC11250088 | biostudies-literature

Water-Resistant Thermoelectric Ionogel Enables Underwater Heat Harvesting.

Project description:The energy crisis is one of the most critical and urgent problems in modern society; thus, harvesting energy from ubiquitous low-grade heat energy with thermoelectric (TE) materials has become an available strategy in sustainable development. Recently, emerging ionic TE materials have been widely used to harvest low-grade heat energy, owing to their excellent performance in high ionic Seebeck coefficient, low thermal conductivity, and mechanical flexibility. However, the instability of ionic conductive materials in the underwater environment seriously suppresses underwater energy-harvesting, resulting in a waste of underwater low-grade heat energy. Herein, we developed a water-resistant TE ionogel (TEIG) with excellent long-term underwater stability utilizing a hydrophobic structure. Due to the hydrophobic polymer network and hydrophobic ionic liquid (IL), the TEIG exhibits high hydrophobicity and antiswelling capacity, which meets the requirement of environment stability for underwater thermoelectric application. Furthermore, the water resistance endows the TEIG with great thermoelectric performances in the underwater environment, including satisfactory ionic Seebeck coefficient, outstanding durability, and superior salt tolerance. Therefore, this investigation provides a promising strategy to design water-resistant TE materials, enabling a remarkable potential in harvesting low-grade heat energy under water.

| S-EPMC10097396 | biostudies-literature

Time-efficient atmospheric water harvesting using Fluorophenyl oligomer incorporated MOFs.

Project description:Adsorption-based atmospheric water harvesting (AWH) has the potential to address water scarcity in arid regions. However, developing adsorbents that effectively capture water at a low relative humidity (RH < 30%) and release it with minimal energy consumption remains a challenge. Herein, we report a fluorophenyl oligomer (FO)-incorporated metal-organic framework (MOF), HKUST-1 (FO@HK), which exhibits fast adsorption kinetics at low RH levels and facile desorption by sunlight. The incorporated fluorophenyl undergoes vapor-phase polymerization at the metal center to generate fluorophenyl oligomers that enhance the hydrolytic stability of FO@HK while preserving its characteristic water sorption behavior. The FO@HK exhibited vapor sorption rates of 8.04 and 11.76 L kg-1MOF h-1 at 20 and 30% RH, respectively, which are better than the state-of-the-art AWH sorbents. Outdoor tests using a solar-driven large-scale AWH device demonstrate that the sorbent can harvest 264.8 mL of water at a rate of 2.62 L kg-1MOF per day. This study provides a ubiquitous strategy for transforming water-sensitive MOFs into AWH sorbents.

| S-EPMC11557930 | biostudies-literature

Atmospheric Water Harvesting: Role of Surface Wettability and Edge Effect.

Project description:Atmospheric water is emerging as an important potable water source. The present work experimentally and theoretically investigates water condensation and collection on flat surfaces with contrasting contact angles and contact angle hysteresis (CAH) to elucidate their roles on water mass collection efficiency. The experimental results indicate that a hydrophilic surface promotes nucleation and individual droplets growth, and a surface with a low CAH tends to let a smaller droplet to slide down, but the overall water mass collection efficiency is independent of both surface contact angle and CAH. The experimental results agree well with our theoretical calculations. During water condensation, a balance has to be struck between single droplet growth and droplet density on a surface so as to maintain a constant water droplet surface coverage ratio, which renders the role of both surface wettability and hysteresis insignificant to the ultimate water mass collection. Moreover, water droplets on the edges of a surface grow much faster than those on the non-edge areas and thus dominate the contribution to the water mass collection by the entire surface, directly pointing out the very important role of edge effect on water condensation and collection.

| S-EPMC6607251 | biostudies-literature

Molecularly confined hydration in thermoresponsive hydrogels for efficient atmospheric water harvesting.

Project description:Water scarcity is a pressing global issue, requiring innovative solutions such as atmospheric water harvesting (AWH), which captures moisture from the air to provide potable water to many water-stressed areas. Thermoresponsive hydrogels, a class of temperature-sensitive polymers, demonstrate potential for AWH as matrices for hygroscopic components like salts predominantly due to their relatively energy-efficient desorption properties compared to other sorbents. However, challenges such as limited swelling capacity due to the salting-out effect and difficulty in more complete water release hinder the effectiveness of conventional hydrogel sorbents. To overcome these limitations, we introduce molecularly confined hydration in thermoresponsive hydrogels by employing a bifunctional polymeric network composed of hygroscopic zwitterionic moieties and thermoresponsive moieties. Here, we show that this approach ensures stable water uptake, enables water release at relatively low temperatures, and exhibits rapid sorption-desorption kinetics. Furthermore, by incorporating photothermal absorbers, the sorbent can achieve solar-driven AWH with comparable water release performance. This work advances the design of AWH sorbents by introducing molecularly confined hydration in thermoresponsive hydrogels, leading to a more efficient and sustainable approach to water harvesting. Our findings offer a potential solution for advanced sorbent design with comprehensive performance to mitigate the freshwater crisis.

| S-EPMC10515161 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data