Dataset Information

Multi-biofunctional graphene oxide-enhanced poly-L-lactic acid composite nanofiber scaffolds for ovarian function recovery of transplanted-tissue.

ABSTRACT: In this study, we successfully constructed the new graphene oxide/poly-L-lactic acid (GO/PLLA) nanofiber scaffolds with a hydrophilic surface and porous network structure that were highly favorable for cell infiltration. When employed these new nanofiber scaffolds for a wide range of tissue engineering applications, it was expected to promote graft tissue survival and angiogenesis. The new GO/PLLA nanofiber scaffold with an appropriate concentration of 1.0 wt% was applied for the restoration of ovarian function and reserve in mice with primary ovarian insufficiency (POI). After co-transplanting the normal ovarian cortex loaded on these new nanomaterials into the in situ ovarian tissue of POI mice, the fusion of transplanted ovarian cortex with damaged ovarian tissue was improved, as well as the ovarian function and the follicle numbers. Moreover, angiogenesis was observed clearly and proved to exist in the transplanted tissue and nanomaterials, with the most conspicuous effect after co-transplantation with 1.0 wt% GO/PLLA nanofiber scaffold. In addition, nitric oxide (NO) production by phosphorylated endothelial nitric oxide synthase (p-eNOS) in vivo was proven to be involved in the effect of GO and PLLA on the improved survival rate of the transplanted ovarian cortex. This study provides a new method for the fertility preservation of ovarian tissue cryopreservation and transplantation, as well as a new strategy for the transplantation of other organs.

SUBMITTER: Yan L

PROVIDER: S-EPMC9481528 | biostudies-literature | 2022 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Multi-biofunctional graphene oxide-enhanced poly-L-lactic acid composite nanofiber scaffolds for ovarian function recovery of transplanted-tissue.

Yan Liang L Wang Lingjuan L Wu Jiachen J Wu Yuanzheng Y Zhu Xianyu X Mei Qiaojuan Q Song Yinhua Y Liu Yang Y Zhang Ling L Ai Jihui J Li Kezhen K Qing Guangming G Zhang Yong Y Xiao Xianjin X Zhao Yuliang Y Xiang Wenpei W

NPJ Regenerative medicine 20220916 1

In this study, we successfully constructed the new graphene oxide/poly-L-lactic acid (GO/PLLA) nanofiber scaffolds with a hydrophilic surface and porous network structure that were highly favorable for cell infiltration. When employed these new nanofiber scaffolds for a wide range of tissue engineering applications, it was expected to promote graft tissue survival and angiogenesis. The new GO/PLLA nanofiber scaffold with an appropriate concentration of 1.0 wt% was applied for the restoration of ...[more]

PMID: 36114211

Similar Datasets

Project description:The novel controlled and localized delivery of drug molecules to target tissues using an external electric stimulus makes electro-responsive drug delivery systems both feasible and desirable, as well as entailing a reduction in the side effects. Novel micro-scaffold matrices were designed based on poly(lactic acid) (PLA) and graphene oxide (GO) via electrospinning. Quercetin (Q), a natural flavonoid, was loaded into the fiber matrices in order to investigate the potential as a model drug for wound dressing applications. The physico-chemical properties, electrical triggering capacity, antimicrobial assay and biocompatibility were also investigated. The newly fabricated PLA/GO/Q scaffolds showed uniform and smooth surface morphologies, without any beads, and with diameters ranging from 1107 nm (10%PLA/0.1GO/Q) to 1243 nm (10%PLA). The in vitro release tests of Q from the scaffolds showed that Q can be released much faster (up to 8640 times) when an appropriate electric field is applied compared to traditional drug-release approaches. For instance, 10 s of electric stimulation is enough to ensure the full delivery of the loaded Q from the 10%PLA/1%GO/Q microfiber scaffold at both 10 Hz and at 50 Hz. The antimicrobial tests showed the inhibition of bacterial film growth. Certainly, these materials could be loaded with more potent agents for anti-cancer, anti-infection, and anti-osteoporotic therapies. The L929 fibroblast cells cultured on these scaffolds were distributed homogeneously on the scaffolds, and the highest viability value of 82.3% was obtained for the 10%PLA/0.5%GO/Q microfiber scaffold. Moreover, the addition of Q in the PLA/GO matrix stimulated the production of IL-6 at 24 h, which could be linked to an acute inflammatory response in the exposed fibroblast cells, as a potential effect of wound healing. As a general conclusion, these results demonstrate the possibility of developing graphene oxide-based supports for the electrically triggered delivery of biological active agents, with the delivery rate being externally controlled in order to ensure personalized release.

Project description:Magnesium (Mg) is a promising biodegradable implant material because of its appropriate mechanical properties and safe degradation products. However, in vivo corrosion speed and hydrogen gas production need to be controlled for uses in biomedical applications. Here we report the development of a conducting polymer 3,4-ethylenedioxythiphene (PEDOT) and graphene oxide (GO) composite coating as a corrosion control layer. PEDOT/GO was electropolymerized on Mg samples in ethanol media. The coated Mg samples were subjected to various corrosion tests. The PEDOT/GO coating significantly reduced the rate of corrosion as evidenced by lower Mg ion concentration and pH of the corrosion media. In addition, the coating decreased the evolved hydrogen. Electrochemical analysis of the corroding samples showed more positive corrosion potential, a decreased corrosion current, and an increase in the polarization resistance. PEDOT/GO corrosion protection is attributed to three factors; an initial passive layer preventing solution ingress, buildup of negative charges in the film, and formation of corrosion protective Mg phosphate layer through redox coupling with Mg corrosion. To explore the biocompatibility of the coated implants in vitro, corrosion media from PEDOT/GO coated or uncoated Mg samples were exposed to cultured neurons where PEDOT/GO coated samples showed decreased toxicity. These results suggest that PEDOT/GO coating will be an effective treatment for controlling corrosion of Mg based medical implants.Statement of significanceCoating Mg substrates with a PEDOT/GO composite coating showed a significant decrease in corrosion rate. While conducting polymer coatings have been used to prevent corrosion on various metals, there has been little work on the use of these coatings for Mg. Additionally, to our knowledge, there has not been a report of the combined used of conducting polymer and GO as a corrosion control layer. Corrosion control is attributed to an initial barrier layer followed by electrochemical coupling of the PEDOT/GO coating with the substrate to facilitate the formation of a protective phosphate layer. This coupling also resulted in a decrease in hydrogen produced during corrosion, which could further improve the host tissue integration of Mg implants. This work elaborates on the potential for electroactive polymers to serve as corrosion control methods.

Dataset Information

Multi-biofunctional graphene oxide-enhanced poly-L-lactic acid composite nanofiber scaffolds for ovarian function recovery of transplanted-tissue.

Publications

Multi-biofunctional graphene oxide-enhanced poly-L-lactic acid composite nanofiber scaffolds for ovarian function recovery of transplanted-tissue.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets