Dataset Information

High Accuracy and Safety of Intraoperative CT-Guided Navigation for Transpedicular Screw Placement in Revision Spinal Surgery.

ABSTRACT:

Background

Intraoperative CT-guided navigation (iCT-navigation) has been reported to improve the accuracy and safety of transpedicular screw placement in primary spinal surgery. However, due to a disrupted bony anatomy and scarring tissue, revision spinal surgery can be challenging. The purpose of this study was to evaluate the accuracy and safety of iCT-navigation for screw placement at the virgin site versus the revision site in revision thoracolumbar spinal surgery.

Method

In total, 254 screws were inserted in 27 revision surgeries, in which 114 (44.9%) screws were inserted at the site with previous laminectomy or posterolateral fusion (the revision site), 64 (25.2%) were inserted at the virgin site, and 76 (29.9%) were inserted to replace the pre-existing screws. CT scans were conducted for each patient after all screws were inserted to intraoperatively confirm the screw accuracy.

Results

In total, 248 (97.6%) screws were considered accepted. The rate of accepted screws at the virgin site was 98.4% (63/64) versus 95.6% (109/114) at the revision site (p: 0.422). There were six (2.4%) unaccepted screws, which were immediately revised during the same operation. There was no neurological injury noted in our patients.

Conclusion

With the use of iCT-navigation, the rate of accepted screws at the revision site was found to be comparable to that at the virgin site. We concluded that iCT-navigation could achieve high accuracy and safety for transpedicular screw placement in revision spinal surgery and allow for the immediate revision of unaccepted screws.

SUBMITTER: Li YY

PROVIDER: S-EPMC9573638 | biostudies-literature | 2022 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

High Accuracy and Safety of Intraoperative CT-Guided Navigation for Transpedicular Screw Placement in Revision Spinal Surgery.

Li Yen-Yao YY Chen Shih-Hao SH Huang Kuo-Chin KC Lee Chien-Yin CY Cheng Chin-Chang CC Lee Ching-Yu CY Wu Meng-Huang MH Huang Tsung-Jen TJ

Journal of clinical medicine 20221002 19

<h4>Background</h4>Intraoperative CT-guided navigation (iCT-navigation) has been reported to improve the accuracy and safety of transpedicular screw placement in primary spinal surgery. However, due to a disrupted bony anatomy and scarring tissue, revision spinal surgery can be challenging. The purpose of this study was to evaluate the accuracy and safety of iCT-navigation for screw placement at the virgin site versus the revision site in revision thoracolumbar spinal surgery.<h4>Method</h4>In t ...[more]

PMID: 36233720

Similar Datasets

Project description:OBJECTIVE:To design and evaluate the accuracy of a novel navigation template suitable for posterior cervical screw placement surgery by using 3D printing technology to improve the existing guiding template design. METHODS:The researchers (including spine surgeons and technicians) used CT to perform thin-slice scanning on 12 cases of normal upper cervical vertebral specimens and defined the screw channels that were completely located in the pedicle without penetrating the cortex as ideal screw channels, then designed the ideal channel of the upper cervical vertebral (atlantoaxial) pedicle screw by computer software which was regarded as the preset values, and recorded the screw entrance point, transverse angle and sagittal angle of the ideal channel. Then, researchers designed the novel navigation templates for placement pedicle screw according to the ideal screw channel preset values and manufactured them with one for every single vertebra by 3D printer. A senior spine surgeon performed the posterior surgery to implant pedicle screw on the specimens by the novel navigation templates, then performed CT thin-slice scanning on the specimens again after removing the screws, and reconstructed the actual screws channel by computer software, recorded the screw entrance point, transverse angle and sagittal angle of the actual channels which were defined as the actual values and evaluated them according to Kawaguchi's pedicle screw evaluation standard finally. The differences between the preoperative preset values of ideal screw channel and the postoperative actual values of actual screw channel were compared by a nonparametric paired rank test. RESULTS:48 screws were placed on 12 cases of upper cervical vertebral specimens in total. It showed that the grade 0, I, II, III channels in this study were 47, 1, 0, 0, respectively. The grade 0 channels accounted for 97.92% of the total number of channels. There was no significant difference with regard to the screw entrance point, the transverse angle, and the sagittal angle between the preoperative preset values of ideal screw channels and the postoperative actual values of actual screw channels. CONCLUSION:To implant pedicle screw assisted with the novel individually navigation template designed by 3D printed in the posterior cervical surgery can improve accuracy of pedicle screw placement and safety of the surgery.

Project description:Reconstruction after multilevel decompression of the cervical spine, especially in the weakened osteoporotic, neoplastic or infectious spine often requires circumferential stabilization and fusion. To avoid the additional posterior surgery in these cases while increasing rigidity of anterior-only screw-plate constructs, the authors introduce the concept of anterior transpedicular screw (ATPS) fixation. We demonstrated its morphological feasibility as well as its indications in a previous study in Part I of our project. Consequently, the objectives of the current study were to assess the ex vivo accuracy of placing ATPS into the cervical vertebra as well as the biomechanical performance of ATPS in comparison to traditional vertebral body screws (VBS) in terms of pull-out strength (POS). Twenty-three ATPS were inserted alternately to two screws into the pedicles and vertebral bodies, respectively, of six cadaveric specimens from C3-T1. For insertion of ATPS, a manual fluoroscopically assisted technique was used. Pre- and post insertional CT-scans were used to assess accuracy of ATPS insertion in the axial and sagittal planes. A newly designed grading system and accuracy score were used to delineate accuracy of ATPS insertion. Following insertion of screws, 23 ATPS and 22 VBS were subjected to pull-out testing (POT). The bone mineral density (BMD) of each specimen was assessed prior to POT. Statistical analysis showed that the incidence of correctly placed screws and non-critical pedicles breaches in axial plane was 78.3%, and 95.7% in sagittal plane. Hence, according to our definition of "critical" pedicle breach that exposes neurovascular structures at risk, 21.7% (n = 5) of all ATPS inserted showed a critical pedicle breach in axial plane. Notably, no critical pedicle perforation occurred at the C6 to T1 levels. Pull-out testing of ATPS and VBS revealed that pull-out resistance of ATPS was 2.5-fold that of VBS. Mean POS of 23 ATPS with a mean BMD of 0.566 g/cm(2) and a mean osseus screw purchase of 27.2 mm was 467.8 N. In comparison, POS of 22 VBS screws with a mean BMD of 0.533 g/cm(2) and a mean osseus screw purchase of 16.0 mm was 181.6 N. The difference in ultimate pull-out strength between the ATPS and VBS group was significant (p < 0.000001). Also, accuracy of ATPS placement in axial plane was shown to be significantly correlated with POS. In contrast, there was no correlation between screw-length, BMD, or level of insertion and the POS of ATPS or VBS. The study demonstrated that the use of ATPS might be a new technique worthy of further investigation. The use of ATPS shows the potential to increase construct rigidity in terms of screw-plate pull-out resistance. It might diminish construct failures during anterior-only reconstructions of the highly unstable decompressed cervical spine.

Dataset Information

High Accuracy and Safety of Intraoperative CT-Guided Navigation for Transpedicular Screw Placement in Revision Spinal Surgery.

Background

Method

Results

Conclusion

Publications

High Accuracy and Safety of Intraoperative CT-Guided Navigation for Transpedicular Screw Placement in Revision Spinal Surgery.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets