Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Surface melting of a colloidal glass.

ABSTRACT: Despite their technological relevance, a full microscopic understanding of glasses is still lacking. This applies even more to their surfaces whose properties largely differ from that of the bulk material. Here, we experimentally investigate the surface of a two-dimensional glass as a function of the effective temperature. To yield a free surface, we use an attractive colloidal suspension of micron-sized particles interacting via tunable critical Casimir forces. Similar to crystals, we observe surface melting of the glass, i.e., the formation of a liquid film at the surface well below the glass temperature. Underneath, however, we find an unexpected region with bulk density but much faster particle dynamics. It results from connected clusters of highly mobile particles which are formed near the surface and deeply percolate into the underlying material. Because its thickness can reach several tens of particle diameters, this layer may elucidate the poorly understood properties of thin glassy films which find use in many technical applications.

SUBMITTER: Tian L

PROVIDER: S-EPMC9633806 | biostudies-literature | 2022 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Surface melting of a colloidal glass.

Tian Li L Bechinger Clemens C

Nature communications 20221103 1

Despite their technological relevance, a full microscopic understanding of glasses is still lacking. This applies even more to their surfaces whose properties largely differ from that of the bulk material. Here, we experimentally investigate the surface of a two-dimensional glass as a function of the effective temperature. To yield a free surface, we use an attractive colloidal suspension of micron-sized particles interacting via tunable critical Casimir forces. Similar to crystals, we observe s ...[more]

PMID: 36329020

Similar Datasets

Surface premelting and melting of colloidal glasses.

Project description:The nature of liquid-to-glass transition is a major puzzle in science. A similar challenge exists in glass-to-liquid transition, i.e., glass melting, especially for the poorly investigated surface effects. Here, we assemble colloidal glasses by vapor deposition and melt them by tuning particle attractions. The structural and dynamic parameters saturate at different depths, which define a surface liquid layer and an intermediate glassy layer. The power-law growth of both layers and melting front behaviors at different heating rates are similar to crystal premelting and melting, suggesting that premelting and melting can be generalized to amorphous solids. The measured single-particle kinetics reveal various features and confirm theoretical predictions for glass surface layer.

| S-EPMC10022898 | biostudies-literature

Trapping/Pinning of colloidal microspheres over glass substrate using surface features.

Project description:Suspensions of micro/nano particles made of Polystyrene, Poly(methyl methacrylate), Silicon dioxide etc. have been a standard model system to understand colloidal physics. These systems have proved useful insights into phenomena such as self-assembly. Colloidal model systems are also extensively used to simulate many condensed matter phenomena such as dynamics in a quenched disordered system and glass transition. A precise control of particles using optical or holographic tweezers is essential for such studies. However, studies of collective phenomena such as jamming and flocking behaviour in a disordered space are limited due to the low throughput of the optical trapping techniques. In this article, we present a technique where we trap and pin polystyrene microspheres ~10 μm over 'triangular crest' shaped microstructures in a microfluidic environment. Trapping/Pinning occurs due to the combined effect of hydrodynamic interaction and non-specific adhesion forces. This method allows trapping and pinning of microspheres in any arbitrary pattern with a high degree of spatial accuracy which can be useful in studying fundamentals of various collective phenomena as well as in applications such as bead detachment assay based biosensors.

| S-EPMC5691049 | biostudies-literature

Measurements of growing surface tension of amorphous-amorphous interfaces on approaching the colloidal glass transition.

Project description:There is mounting evidence indicating that relaxation dynamics in liquids approaching their glass transition not only become increasingly cooperative, but the relaxing regions also become more compact in shape. Of the many theories of the glass transition, only the random first-order theory-a thermodynamic framework-anticipates the surface tension of relaxing regions to play a role in deciding both their size and morphology. However, owing to the amorphous nature of the relaxing regions, even the identification of their interfaces has not been possible in experiments hitherto. Here, we devise a method to directly quantify the dynamics of amorphous-amorphous interfaces in bulk supercooled colloidal liquids. Our procedure also helped unveil a non-monotonic evolution in dynamical correlations with supercooling in bulk liquids. We measure the surface tension of the interfaces and show that it increases rapidly across the mode-coupling area fraction. Our experiments support a thermodynamic origin of the glass transition.

| S-EPMC5786034 | biostudies-literature

Experimental observation of the marginal glass phase in a colloidal glass.

Project description:The replica theory of glasses predicts that in the infinite dimensional mean field limit, there exist two distinct glassy phases of matter: stable glass and marginal glass. We have developed a technique to experimentally probe these phases of matter using a colloidal glass. We avoid the difficulties inherent in measuring the long time behavior of glasses by instead focusing on the very short time dynamics of the ballistic to caged transition. We track a single tracer particle within a slowly densifying glass and measure the resulting mean squared displacement (MSD). By analyzing the MSD, we find that upon densification, our colloidal system moves through several states of matter. At lowest densities, it is a subdiffusive liquid. Next, it behaves as a stable glass, marked by the appearance of a plateau in the MSD whose magnitude shrinks with increasing density. However, this shrinking plateau does not shrink to zero; instead, at higher densities, the system behaves as a marginal glass, marked by logarithmic growth in the MSD toward that previous plateau value. Finally, at the highest experimental densities, the system returns to the stable glass phase. This provides direct experimental evidence for the existence of a marginal glass in three dimensions.

| S-EPMC7084089 | biostudies-literature

Multiple temperatures and melting of a colloidal active crystal.

Project description:Thermal fluctuations constantly excite all relaxation modes in an equilibrium crystal. As the temperature rises, these fluctuations promote the formation of defects and eventually melting. In active solids, the self-propulsion of "atomic" units provides an additional source of non-equilibrium fluctuations whose effect on the melting scenario is still largely unexplored. Here we show that when a colloidal crystal is activated by a bath of swimming bacteria, solvent temperature and active temperature cooperate to define dynamic and thermodynamic properties. Our system consists of repulsive paramagnetic particles confined in two dimensions and immersed in a bath of light-driven E. coli. The relative balance between fluctuations and interactions can be adjusted in two ways: by changing the strength of the magnetic field and by tuning activity with light. When the persistence time of active fluctuations is short, a single effective temperature controls both the amplitudes of relaxation modes and the melting transition. For more persistent active noise, energy equipartition is broken and multiple temperatures emerge, whereas melting occurs before the Lindemann parameter reaches its equilibrium critical value. We show that this phenomenology is fully confirmed by numerical simulations and framed within a minimal model of a single active particle in a periodic potential.

| S-EPMC11297967 | biostudies-literature

Accelerated crystallization of colloidal glass by mechanical oscillation.

Project description:Crystallization of a hard-sphere colloidal glass by mechanical oscillation is investigated, and accelerated crystallization is found at a specific frequency. The crystallization frequency increases as attractive force between particles increases, indicating that interparticle interaction affects the crystallization frequency. Time scale of the mechanical oscillation is different from that of the slow relaxation, and notable relationship with the low-frequency mode is not observed. The experimental results are not explained by the previously proposed model for crystallization by oscillatory shear. Conversely, we speculate that activations of the fast relaxation and particle motion in crystal-like clusters are possible causes of the observations.

| S-EPMC5430959 | biostudies-literature

Experimental identification of topological defects in 2D colloidal glass.

Project description:Topological defects are singularities within a field that cannot be removed by continuous transformations. The definition of these irregularities requires an ordered reference configuration, calling into question whether they exist in disordered materials, such as glasses. However, recent work suggests that well-defined topological defects emerge in the dynamics of glasses, even if they are not evident in the static configuration. In this study, we reveal the presence of topological defects in the vibrational eigenspace of a two-dimensional experimental colloidal glass. These defects strongly correlate with the vibrational features and spatially correlate with each other and structural "soft spots", more prone to plastic flow. This work experimentally confirms the existence of topological defects in disordered systems revealing the complex interplay between topology, disorder, and dynamics.

| S-EPMC11697214 | biostudies-literature

Size-Dependent Melting Behavior of Colloidal In, Sn, and Bi Nanocrystals.

Project description:Colloidal nanocrystals are a technologically important class of nanostructures whose phase change properties have been largely unexplored. Here we report on the melting behavior of In, Sn, and Bi nanocrystals dispersed in a polymer matrix. This polymer matrix prevents the nanocrystals from coalescing with one another and enables previously unaccessed observations on the melting behavior of colloidal nanocrystals. We measure the melting temperature, melting enthalpy, and melting entropy of colloidal nanocrystals with diameters of approximately 10 to 20 nm. All of these properties decrease as nanocrystal size decreases, although the depression rate for melting temperature is comparatively slower than that of melting enthalpy and melting entropy. We also observe an elevated melting temperature during the initial melt-freeze cycle that we attribute to surface stabilization from the organic ligands on the nanocrystal surface. Broad endothermic melting valleys and very large supercoolings in our calorimetry data suggest that colloidal nanocrystals exhibit a significant amount of surface pre-melting and low heterogeneous nucleation probabilities during freezing.

| S-EPMC4648084 | biostudies-literature

Bisphosphonium cation based metal halide glass scintillators with tunable melting points.

Project description:Organic-inorganic metal halide (OIMH) glass offers the advantages of large-scale production, high transparency, and minimal light scattering. However, undesired crystallization in OIMH glass can occur, leading to deteriorated transparency. Herein, a series of bisphosphonium organic cations were designed to construct Mn-based metal halide crystals with a photoluminescence quantum yield (PLQY) near unity, alongside the development of highly thermally stable OIMH glasses. Two strategies were employed to lower the melting point of OIMH: alkyl chain elongation and fluorine substitution. The (Hex-3,4-2F)MnBr4·MeOH (Hex-3,4-2F = hexane-1,6-diylbis((3,4-difluorobenzyl)diphenylphosphonium)) crystal delivers a glass transition temperature of 100 °C and the highest T g/T m ratio (0.82) among OIMHs. The resulting OIMH glass exhibits a PLQY of 47.6%, achieves an impressive resolution of 25 lp mm-1 in X-ray imaging, and remains transparent even after being heated at 90 °C for six weeks. These bisphosphonium-based OIMH glasses present a feasible design for the practical application of OIMH glasses in radiation detection.

| S-EPMC11409857 | biostudies-literature

Direct observation of liquid nucleus growth in homogeneous melting of colloidal crystals.

Project description:The growth behaviour of liquid nucleus is crucial for crystal melting, but its kinetics is difficult to predict and remains challenging in experiment. Here we directly observed the growth of individual liquid nuclei in homogeneous melting of three-dimensional superheated colloidal crystals with single-particle dynamics by video microscopy. The growth rate of nucleus at weak superheating is well fitted by generalizing the Wilson-Frenkel law of crystallization to melting and including the surface tension effects and non-spherical-shape effects. As the degree of superheating increases, the growth rate is enhanced by nucleus shape fluctuation, nuclei coalescence and multimer attachment. The results provide new guidance for the refinement of nucleation theory, especially for the poorly understood strong-superheating regime. The universal Lindemann parameter observed at the superheat limit and solid-liquid interfaces indicates a connection between homogeneous and heterogeneous melting.

| S-EPMC4411290 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data