Nanoantennas Patterned by Colloidal Lithography for Enhanced Nanophosphor Light Emission
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC9706497 | biostudies-literature | 2022 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We fabricated large-area metallic (Al and Au) nanoantenna arrays on Si substrates using cost-effective colloidal lithography with different micrometer-sized polystyrene spheres. Variation of the sphere size leads to tunable plasmon resonances in the middle infrared (MIR) range. The enhanced near-fields allow us to detect the surface phonon polaritons in the natural SiO2 thin layers. We demonstrated further tuning capability of the resonances by employing dry etching of the Si substrates with the nanoantennas acting as the etching masks. The effective refractive index of the nanoantenna surroundings is efficiently decreased giving rise to blueshifts of the resonances. In addition, partial removal of the Si substrates elevates the nanoantennas from the high-refractive-index substrates making more enhanced near-fields accessible for molecular sensing applications as demonstrated here with surface-enhanced infrared absorption (SEIRA) spectroscopy for a thin polymer film. We also directly compared the plasmonic enhancement from the Al and Au nanoantenna arrays.
| S-EPMC5341049 | biostudies-literature
Project description:Herein, we present a general method to prepare self-standing flexible photoluminescent coatings of controlled opacity for integration into light-emitting diodes (LEDs) employing cost-effective solution-processing methods. From colloidal suspensions of nano-sized phosphors, we fabricate light-emitting transparent films that can be doped with spherical scatterers, which act as Mie resonators that trigger a controlled photoluminescence enhancement, evidenced by the reduction of the guided light along the layer. This results in an enhanced emission compared to that extracted from a bare phosphor layer. We show not only that emission is visible under ultraviolet-LED illumination for both rigid and flexible versions of the coatings, but we also prove the feasibility of the integration of these flexible conversion layers into such devices. We believe these results can contribute to develop more efficient and cost-effective illumination sources by providing efficient and easy-to-handle conversion layers susceptible to excitation by LEDs emitting at wavelengths in the near UV region.
| S-EPMC6394886 | biostudies-literature
Project description:Eu-doped GaN is a promising material for the active layer in red light emitting diodes. Although the output power of LEDs based on GaN:Eu has been increasing by a combination of structural and growth optimizations, there is still a significant limitation resulting from a poor light extraction efficiency, typical for high refractive index materials. Here we studied nanostructuring of the top of the optical active layer by nano-cubes for enhancement of the light extraction efficiency, and its effect on the optical emission characteristics. By etching nano-cubes into the active layer, we observed an increase in directional light output power of Eu3+ ions of up to 60%, as well as a grating effect. Simultaneously, the absorption of excitation light into the optical active layer was improved, leading to a 12.8 times increase of output power per available Eu3+ ion.
| S-EPMC6414605 | biostudies-literature
Project description:Current state-of-the-art quantum dot light-emitting diodes have reached close to unity internal quantum efficiency. Further improvement in external quantum efficiency requires more efficient photon out-coupling. Improving the directivity of the photon emission is considered to be the most feasible approach. Here, we report improved emission directivity from colloidal quantum dot films. By growing an asymmetric compressive shell, we are able to lift their band-edge state degeneracy, which leads to an overwhelming population of exciton with in-plane dipole moment, as desired for high-efficiency photon out-coupling. The in-plane dipole proportion determined by back-focal plane imaging method is 88%, remarkably higher than 70% obtained from conventional hydrostatically strained colloidal quantum dots. Enhanced emission directivity obtained here opens a path to increasing the external quantum efficiencies notably.
| S-EPMC8865764 | biostudies-literature
Project description:Efficient and tunable absorption is essential for a variety of applications, such as designing controlled-emissivity surfaces for thermophotovoltaic devices, tailoring an infrared spectrum for controlled thermal dissipation and producing detector elements for imaging. Metamaterials based on metallic elements are particularly efficient as absorbing media, because both the electrical and the magnetic properties of a metamaterial can be tuned by structured design. So far, metamaterial absorbers in the infrared or visible range have been fabricated using lithographically patterned metallic structures, making them inherently difficult to produce over large areas and hence reducing their applicability. Here we demonstrate a simple method to create a metamaterial absorber by randomly adsorbing chemically synthesized silver nanocubes onto a nanoscale-thick polymer spacer layer on a gold film, making no effort to control the spatial arrangement of the cubes on the film. We show that the film-coupled nanocubes provide a reflectance spectrum that can be tailored by varying the geometry (the size of the cubes and/or the thickness of the spacer). Each nanocube is the optical analogue of a grounded patch antenna, with a nearly identical local field structure that is modified by the plasmonic response of the metal's dielectric function, and with an anomalously large absorption efficiency that can be partly attributed to an interferometric effect. The absorptivity of large surface areas can be controlled using this method, at scales out of reach of lithographic approaches (such as electron-beam lithography) that are otherwise required to manipulate matter on the nanoscale.
| S-EPMC3584706 | biostudies-literature
Project description:Rare-earth-based phosphors are the materials on which current solid-state lighting technology is built. However, their large crystal size impedes the tuning, optimization, or manipulation of emitted light that can be achieved by their integration in nanophotonic architectures. Herein we demonstrate a hybrid plasmonic-photonic architecture capable of both channeling in a specific direction and enhancing by eight times the emission radiated by a macroscopically wide layer of nanophosphors. In order to do so, a slab of rare-earth-based nanocrystals is inserted between a dielectric multilayer and a metal film, following a rational design that optimizes the coupling of nanophosphor emission to collective modes sustained by the metal-dielectric system. Our approach is advantageous for the optimization of solid-state lighting systems.
| S-EPMC6488127 | biostudies-literature
Project description:Typical emitters such as molecules, quantum dots and semiconductor quantum wells have slow spontaneous emission with lifetimes of 1-10 ns, creating a mismatch with high-speed nanoscale optoelectronic devices such as light-emitting diodes, single-photon sources and lasers. Here we experimentally demonstrate an ultrafast (<11 ps) yet efficient source of spontaneous emission, corresponding to an emission rate exceeding 90 GHz, using a hybrid structure of single plasmonic nanopatch antennas coupled to colloidal quantum dots. The antennas consist of silver nanocubes coupled to a gold film separated by a thin polymer spacer layer and colloidal core-shell quantum dots, a stable and technologically relevant emitter. We show an increase in the spontaneous emission rate of a factor of 880 and simultaneously a 2,300-fold enhancement in the total fluorescence intensity, which indicates a high radiative quantum efficiency of ∼50%. The nanopatch antenna geometry can be tuned from the visible to the near infrared, providing a promising approach for nanophotonics based on ultrafast spontaneous emission.
| S-EPMC4525280 | biostudies-literature
Project description:Adsorption of organic molecules at ZnO nanoparticle surfaces enables the transfer of energy or charge across resulting organic-inorganic interfaces and, consequently, determines the optoelectronic performance of ZnO based hybrids. We investigated on aqueous colloidal ZnO dispersions adsorption-induced changes with photoluminescence (PL) and electron paramagnetic resonance (EPR) spectroscopy. Citrate and acetate ion adsorption increases or decreases radiative exciton annihilation at hν = 3.3 eV and at room temperature, respectively. Searching for a correspondence between PL emission and the yield of trapped charge carriers originating from exciton separation - using photon energies of hν = 4.6 eV and fluxes of = 1014 cm-2 s-1 for excitation - we found that there is a negligible fraction of paramagnetic products that originate from exciton separation. Upon polychromatic excitation with significantly higher photon fluxes (Ṅ ph = 1016 cm-2·s-1), ZnO specific shallow defects trap unpaired electrons in citrate and acetate functionalized samples. The adsorption dependent PL intensity changes and the excitation parameter dependent yield of separated charges (EPR) in colloidal ZnO nanoparticles underline that the distribution over the different exciton annihilation channels sensitively depends on interface composition and the intensity of the photoexcitation light.
| S-EPMC7116049 | biostudies-literature
Project description:The site-selective assembly of colloidal polymer particles onto laterally patterned silane layers was studied as a model system for the object assembly process at mesoscale dimensions. The structured silane monolayers on silicon oxide substrates were fabricated by a combination of liquid- and gas-phase deposition of different trialkoxysilanes with a photolithographic patterning technique. By using this method various types of surface functionalizations such as regions with amino functions next to areas of the bare silica surface or positively charged regions of a quaternary ammonium silane surrounded by a hydrophobic octadecylsilane film could be obtained. Furthermore, a triethoxysilane with a photoprotected amino group was synthesized, which allowed direct photopatterning after monolayer preparation, leading to free NH(2) groups at the irradiated regions. The different silane monolayer patterns were used to study the surface assembly behavior of carboxylated methacrylate particles by optical and scanning electron microscopy. In dependence of the assembly conditions (different surface functionalizations, pH, and drying conditions), a selective preference of the particles for a specific surface type versus others was found. Site-specific colloid adsorption could be observed also on the photosensitive silane layers after local deprotection with light. From the photosensitive silane and positively charged ammonium silane, molecularly mixed monolayers were prepared, which allowed particle adsorption and photoactivation within the same monolayer as shown by fluorescence labeling.
| S-EPMC122717 | biostudies-literature
Project description:We demonstrated a low-cost, highly sensitive hybrid Ag-Cu substrate with enhanced absorption for the excitation laser beam via the nanosphere lithography technique. The hybrid Ag-Cu surface-enhanced Raman spectroscopy (SERS) substrate consists of a Cu nanoarray covered with Ag nanoparticles. The geometry of the deposited Cu nanoarray is precisely determined through a self-assembly nanosphere etching process, resulting in optimized absorption for the excitation laser beam. Further Raman enhancement is achieved by incorporating plasmonic hotspots formed by dense Ag nanoparticles, grown by immersing the prepared Cu nanoarray in a silver nitrate solution. The structural design enables analytical enhancement factor of hybrid Ag-Cu SERS substrates of 1.13 × 105. The Ag-Cu SERS substrates exhibit a highly sensitive and reproducible SERS activity, with a low detection limit of 10-13 M for Rhodamine 6G detection and 10-9 M for 4,4'-Bipyridine. Our strategy could pave an effective and promising approach for SERS-based rapid detection in biosensors, environmental monitoring and food safety.
| S-EPMC10452600 | biostudies-literature