Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Reduced Graphene Oxide-Wrapped Novel CoIn2S4 Spinel Composite Anode Materials for Li-ion Batteries

ABSTRACT: In this study, we proposed a novel CoIn2S4/reduced graphene oxide (CoIn2S4/rGO) composite anode using a hydrothermal method. By introducing electronic-conductive reduced graphene oxide (rGO) to buffer the extreme volume expansion of CoIn2S4, we prevented its polysulfide dissolution during the lithiation/de-lithiation processes. After 100 cycles, the pristine CoIn2S4 electrode demonstrated poor cycle performance of only 120 mAh/g at a current density of 0.1 A/g. However, the composition-optimized CoIn2S4/rGO composite anode demonstrated a reversible capacity of 580 mAh/g for 100 cycles, which was an improvement of 4.83 times. In addition, the ex situ XRD measurements of the CoIn2S4/rGO electrode were conducted to determine the reaction mechanism and electrochemical behavior. These results suggest that the as-synthesized CoIn2S4/rGO composite anode is a promising anode material for lithium ion batteries.

SUBMITTER:

PROVIDER: S-EPMC9781618 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Metal Oxide Wrapped by Reduced Graphene Oxide Nanocomposites as Anode Materials for Lithium-Ion Batteries.

Project description:The reduced graphene oxide/iron oxide (rGO/Fe2O3) and reduced graphene oxide/cobalt oxide (rGO/Co3O4) composite anodes have been successfully prepared through a simple and scalable ball-milling synthesis. The substantial interaction of Fe2O3 and Co3O4 with the rGO matrix strengthens the electronic conductivity and limits the volume variation during cycling in the rGO/Fe2O3 and rGO/Co3O4 composites because reduced graphene oxide (rGO) helps the metal oxides (MOs) to attain a more efficient diffusion of Li-ions and leads to high specific capacities. As anode materials for LIBs, the rGO/Fe2O3 and rGO/Co3O4 composites demonstrate overall superb electrochemical properties, especially rGO/Fe2O3T-5 and rGO/Co3O4T-5, showcasing higher reversible capacities of 1021 and 773 mAhg-1 after 100 cycles at 100 mAg-1, accompanied by the significant rate performance. Because of their superior electrochemical efficiency, high capacity and low cost, the rGO/Fe2O3 and rGO/Co3O4 composites made by ball milling could be outstanding anode materials for LIBs. Due to the excellent electrochemical performance, the rGO/Fe2O3 and rGO/Co3O4 composites prepared via ball milling could be promising anode materials with a high capacity and low cost for LIBs. The findings may provide shed some light on how other metal oxides wrapped by rGO can be prepared for future applications.

| S-EPMC9865346 | biostudies-literature

Spinel rGO Wrapped CoV2O4 Nanocomposite as a Novel Anode Material for Sodium-Ion Batteries.

Project description:Binary mixed transition-based metal oxides have some of the most potential as anode materials for rechargeable advanced battery systems due to their high theoretical capacity and tremendous electrochemical performance. Nonetheless, binary metal oxides still endure low electronic conductivity and huge volume expansion during the charge/discharge processes. In this study, we synthesized a reduced graphene oxide (rGO)-wrapped CoV2O4 material as the anode for sodium ion batteries. The X-ray diffraction analyses revealed pure-phased CoV2O4 (CVO) rGO-wrapped CoV2O4 (CVO/rGO) nanoparticles. The capacity retention of the CVO/rGO composite anode demonstrated 81.6% at the current density of 200 mA/g for more than 1000 cycles, which was better than that of the bare one of only 73.5% retention. The as-synthesized CVO/rGO exhibited remarkable cyclic stability and rate capability. The reaction mechanism of the CoV2O4 anode with sodium ions was firstly studied in terms of cyclic voltammetry (CV) and ex situ XRD analyses. These results articulated the manner of utilizing the graphene oxide-coated spinel-based novel anode-CoV2O4 as a potential anode for sodium ion batteries.

| S-EPMC7182827 | biostudies-literature

3D MoS2/graphene oxide integrated composite as anode for high-performance sodium-ion batteries.

Project description:Sodium-ion batteries (SIBs) are emerging as a promising alternative to conventional lithium-ion technology, due to the abundance of sodium resources. The major drawbacks for the commercial application of SIBs lie in the slow kinetic processes and poor energy density of the devices. Molybdenum sulfide (MoS2), a graphene-like material, is becoming a promising anode material for SIBs, because of its high theoretical capacity (670 mAh g-1) and layered structure that suitable for Na+ intercalation/extraction. However, the intrinsic properties of MoS2, such as low conductivity, slow Na+ diffusion kinetics and large volume change during charging/discharging, restrict its rate capability and cycle stability. Here, molybdenum disulfide and graphene oxide (3D MoS2/GO) with excellent conductivity were fabricated through layer-by-layer method using amino-functionalized SiO2 nanospheres as templates. The 3D MoS2/GO composite demonstrates excellent cycling stability and capacity of 525 mA h g-1 at 500 mA g-1 after 100 cycles, which mainly due to the integrated MoS2/GO components and unique 3D macroporous structure, facilitating the material conductivity and Na+ diffusion rate, while tolerating the volume expansion of MoS2 during the charge/discharge processes.

| S-EPMC11336104 | biostudies-literature

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries.

Project description:Tin (II) sulfide (SnS) has been regarded as an attractive anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity. However, sulfide undergoes significant volume change during lithiation/delithiation, leading to rapid capacity degradation, which severely hinders its further practical application in lithium-ion batteries. Here, we report a simple and effective method for the synthesis of SnS@C/G composites, where SnS@C nanoparticles are strongly coupled onto the graphene oxide nanosheets through dopamine-derived carbon species. In such a designed architecture, the SnS@C/G composites show various advantages including buffering the volume expansion of Sn, suppressing the coarsening of Sn, and dissolving Li2S during the cyclic lithiation/delithiation process by graphene oxide and N-doped carbon. As a result, the SnS@C/G composite exhibits outstanding rate performance as an anode material for lithium-ion batteries with a capacity of up to 434 mAh g-1 at a current density of 5.0 A g-1 and excellent cycle stability with a capacity retention of 839 mAh g-1 at 1.0 A g-1 after 450 cycles.

| S-EPMC9845928 | biostudies-literature

TiO<sub>2</sub> nanotubes wrapped with reduced graphene oxide as a high-performance anode material for lithium-ion batteries.

Project description:Through electrostatic interaction and high-temperature reduction methods, rGO was closely coated onto the surface of TiO2 nanotubes. Even at a high temperature of 700 °C, the nanotube morphology of TiO2 (anatase) was preserved because of the assistance of rGO, which provides a framework that prevents the tubes from breaking into particles and undergoing a phase transformation. The rGO/TiO2 nanotubes deliver a high capacity (263 mAh g-1 at the end of 100 cycles at 0.1 A g-1), excellent rate performance (151 mAh g-1 at 2 A g-1 and 102 mAh g-1 at 5 A g-1), and good cycle stability (206 mAh g-1 after 500 cycles at 0.5 A g-1). These characteristics arise from the GO/TiO2 nanotubes' advanced structure. First, the closely coated rGO and Ti3+ in the tubes give rise to a high electro-conductivity of the nanotubes. Additionally, the Li+ ions can rapidly transfer into the electrode via the nanotubes' empty inner diameter and short tube wall.

| S-EPMC5093559 | biostudies-literature

3D printed silicon-few layer graphene anode for advanced Li-ion batteries.

Project description:The printing of three-dimensional (3D) porous electrodes for Li-ion batteries is considered a key driver for the design and realization of advanced energy storage systems. While different 3D printing techniques offer great potential to design and develop 3D architectures, several factors need to be addressed to print 3D electrodes, maintaining an optimal trade-off between electrochemical and mechanical performances. Herein, we report the first demonstration of 3D printed Si-based electrodes fabricated using a simple and cost-effective fused deposition modelling (FDM) method, and implemented as anodes in Li-ion batteries. To fulfil the printability requirement while maximizing the electrochemical performance, the composition of the FDM filament has been engineered using polylactic acid as the host polymeric matrix, a mixture of carbon black-doped polypyrrole and wet-jet milling exfoliated few-layer graphene flakes as conductive additives, and Si nanoparticles as the active material. The creation of a continuous conductive network and the control of the structural properties at the nanoscale enabled the design and realization of flexible 3D printed anodes, reaching a specific capacity up to ∼345 mA h g-1 at the current density of 20 mA g-1, together with a capacity retention of 96% after 350 cycles. The obtained results are promising for the fabrication of flexible polymeric-based 3D energy storage devices to meet the challenges ahead for the design of next-generation electronic devices.

| S-EPMC9042803 | biostudies-literature

Pitch-based carbon/nano-silicon composite, an efficient anode for Li-ion batteries.

Project description:As silicon-carbon electrodes with low silicon ratio are the negative electrode foreseen by battery manufacturers for the next generation of Li-ion batteries, a great effort has to be made to improve their efficiency and decrease their cost. Pitch-based carbon/nano-silicon composites are proposed as a high performance and realistic electrode material of Li-ion battery anodes. Composites are prepared in a simple way by the pyrolysis under argon atmosphere of silicon nanoparticles, obtained by a laser pyrolysis technique, and a low cost carbon source: petroleum pitch. The effect of the size and the carbon coating of the silicon nanoparticles on the electrochemical performance in Li-ion batteries is highlighted, proving that the carbon coating enhances cycling stability. Helped by a homogeneous dispersion of silicon nanoparticles into the amorphous carbon matrix, a high coulombic efficiency (especially in the first cycle) and a high stability over cycling is observed (over 1100 mA h g-1 after 100 cycles at relatively high current density 716 mA g-1 for Si based electrodes), which are superior to pitch-based carbon/silicon composites found in literature. This simple synthesis method may be extrapolated to other electrode active materials.

| S-EPMC9062498 | biostudies-literature

Characteristics and electrochemical performances of silicon/carbon nanofiber/graphene composite films as anode materials for binder-free lithium-ion batteries.

Project description:We report the interfacial study of a silicon/carbon nanofiber/graphene composite as a potentially high-performance anode for rechargeable lithium-ion batteries (LIBs). Silicon nanoparticle (Si)/carbon nanofiber (CNF)/reduced graphene oxide (rGO) composite films were prepared by simple physical filtration and an environmentally-friendly thermal reduction treatment. The films were used as high-performance anode materials for self-supporting, binder-free LIBs. Reducing graphene oxide improves the electron conductivity and adjusts to the volume change during repeated charge/discharge processes. CNFs can help maintain the structural stability and prevent the peeling off of silicon nanoparticles from the electrodes. When the fabricated Si/CNF/rGO composites were used as anodes of LIBs, the initial specific capacity was measured to be 1894.54 mAh/g at a current density of 0.1 A/g. After 100 cycles, the reversible specific capacity was maintained at 964.68 mAh/g, and the coulombic efficiency could reach 93.8% at the same current density. The Si/CNF/rGO composite electrode exhibited a higher specific capacity and cycle stability than an Si/rGO composite electrode. The Si/CNF/rGO composite films can effectively accommodate and buffer changes in the volume of silicon nanoparticles, form a stable solid-electrolyte interface, improve the conductivity of the electrode, and provide a fast and efficient channel for electron and ion transport.

| S-EPMC7809343 | biostudies-literature

Facile synthesis of reduced graphene oxide by modified Hummer's method as anode material for Li-, Na- and K-ion secondary batteries.

Project description:Reduced graphene oxide (rGO) sheets were synthesized by a modified Hummer's method without additional reducing procedures, such as chemical and thermal treatment, by appropriate drying of graphite oxide under ambient atmosphere. The use of a moderate drying temperature (250°C) led to mesoporous characteristics with enhanced electrochemical activity, as confirmed by electron microscopy and N2 adsorption studies. The dimensions of the sheets ranged from nanometres to micrometres and these sheets were entangled with each other. These morphological features of rGO tend to facilitate the movement of guest ions larger than Li+. Impressive electrochemical properties were achieved with the rGO electrodes using various charge-transfer ions, such as Li+, Na+ and K+, along with high porosity. Notably, the feasibility of this system as the carbonaceous anode material for sodium battery systems is demonstrated. Furthermore, the results also suggest that the high-rate capability of the present rGO electrode can pave the way for improving the full cell characteristics, especially for preventing the potential drop in sodium-ion batteries and potassium-ion batteries, which are expected to replace the lithium-ion battery system.

| S-EPMC6502357 | biostudies-literature

Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries.

Project description:The copper oxide (CuO) nanowires/functionalized graphene (f-graphene) composite material was successfully composed by a one-pot synthesis method. The f-graphene synthesized through the Birch reduction chemistry method was modified with functional group "-(CH?)?COOH", and the CuO nanowires (NWs) were well dispersed in the f-graphene sheets. When used as anode materials in lithium-ion batteries, the composite exhibited good cyclic stability and decent specific capacity of 677 mA·h·g-1 after 50 cycles. CuO NWs can enhance the lithium-ion storage of the composites while the f-graphene effectively resists the volume expansion of the CuO NWs during the galvanostatic charge/discharge cyclic process, and provide a conductive paths for charge transportation. The good electrochemical performance of the synthesized CuO/f-graphene composite suggests great potential of the composite materials for lithium-ion batteries anodes.

| S-EPMC5344618 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data