Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

SnO₂ mesoporous nanoparticle-based gas sensor for highly sensitive and low concentration formaldehyde detection.

ABSTRACT: Indoor air quality detection, especially formaldehyde (HCHO) detection, is of great importance in practical application. A key limitation of promoting gas-sensing devices is the lack of sensing materials with high sensing sensitivity and selectivity. In this study, SnO₂ mesoporous nanoparticles are fabricated by a facile hydrothermal route with a subsequent acid etching process. The prepared samples show high response toward HCHO (133.5, 222.8 for 100 ppm and 200 ppm HCHO, respectively) and short response/recovery time (15/22 s at 10 ppm). The excellent HCHO sensing performance benefits from the comprehensive regulation of the depletion region width, surface area and rich porosity, which is effective for the promotion of surface adsorption and catalyst activity. It is expected that the excellent sensing properties are promising for practical HCHO gas detection.

SUBMITTER: Liu P

PROVIDER: S-EPMC9837703 | biostudies-literature | 2023 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

SnO2 mesoporous nanoparticle-based gas sensor for highly sensitive and low concentration formaldehyde detection.

Liu Pengfei P Wang Jianbin J Jin Han H Ge Meiying M Zhang Fang F Wang Cheng C Sun Yan Y Dai Ning N

RSC advances 20230113 4

Indoor air quality detection, especially formaldehyde (HCHO) detection, is of great importance in practical application. A key limitation of promoting gas-sensing devices is the lack of sensing materials with high sensing sensitivity and selectivity. In this study, SnO2 mesoporous nanoparticles are fabricated by a facile hydrothermal route with a subsequent acid etching process. The prepared samples show high response toward HCHO (133.5, 222.8 for 100 ppm and 200 ppm HCHO, respectivel ...[more]

PMID: 36741165

Similar Datasets

Formaldehyde gas sensor with extremely high response employing cobalt-doped SnO2 ultrafine nanoparticles.

Project description:Formaldehyde is a common carcinogen in daily life and harmful to health. The detection of formaldehyde by a metal oxide semiconductor gas sensor is an important research direction. In this work, cobalt-doped SnO2 nanoparticles (Co-SnO2 NPs) with typical zero-dimensional structure were synthesized by a simple hydrothermal method. At the optimal temperature, the selectivity and response of 0.5% Co-doped SnO2 to formaldehyde are excellent (for 30 ppm formaldehyde, R a/R g = 163 437). Furthermore, the actual minimum detectable concentration of 0.5%Co-SnO2 NPs is as low as 40 ppb, which exceeds the requirements for formaldehyde detection in the World Health Organization (WHO) guidelines. The significant improvement of 0.5%Co-SnO2 NPs gas performance can be attributed to the following aspects: firstly, cobalt doping effectively improves the resistance of SnO2 NPs in the air; moreover, doping creates more defects and oxygen vacancies, which is conducive to the adsorption and desorption of gases. In addition, the crystal size of SnO2 NPs is vastly small and has unique physical and chemical properties of zero-dimensional materials. At the same time, compared with other gases tested, formaldehyde has a strong reducibility, so that it can be selectively detected at a lower temperature.

| S-EPMC9419867 | biostudies-literature

Industrial Potential of Formaldehyde Gas Sensor Based on PdPt Bimetallic Loaded SnO2 Nanoparticles.

Project description:SnO2-based semiconductor gas-sensing materials are regarded as some of the most crucial sensing materials, owing to their extremely high electron mobility, high sensitivity, and excellent stability. To bridge the gap between laboratory-scale SnO2 and its industrial applications, low-cost and high-efficiency requirements must be met. This implies the need for simple synthesis techniques, reduced energy consumption, and satisfactory gas-sensing performances. In this study, we utilized a surfactant-free simple method to modify SnO2 nanoparticles with PdPt noble metals, ensuring the stable state of the material. Under the synergistic catalytic effect of Pd and Pt, the composite material (1.0 wt%-PdPt-SnO2) significantly enhanced its response to HCHO. This modification decreased the optimal working temperature to as low as 180 °C to achieve a response value (Ra/Rg = 8.2) and showcased lower operating temperatures, higher sensitivity, and better selectivity to detect 10 ppm of HCHO when compared with pristine SnO2 or single noble metal-decorated SnO2 sensors. Stability tests verified that the gas sensor signals based on PdPt-SnO2 nanoparticles exhibit good reliability. Furthermore, a portable HCHO detector was designed for practical applications, such as in newly purchased cushions, indicating its potential for industrialization beyond the laboratory.

| S-EPMC11902779 | biostudies-literature

Graphene Oxide@3D Hierarchical SnO2 Nanofiber/Nanosheets Nanocomposites for Highly Sensitive and Low-Temperature Formaldehyde Detection.

Project description:In this work, we reported a formaldehyde (HCHO) gas sensor with highly sensitive and selective gas-sensing performance at low operating temperature based on graphene oxide (GO)@SnO2 nanofiber/nanosheets (NF/NSs) nanocomposites. Hierarchical SnO2 NF/NSs coated with GO nanosheets showed enhanced sensing performance for HCHO gas, especially at low operating temperature. A series of characterization methods, including X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) were used to characterize their microstructures, morphologies, compositions, surface areas and so on. The sensing performance of GO@SnO2 NF/NSs nanocomposites was optimized by adjusting the loading amount of GO ranging from 0.25% to 1.25%. The results showed the optimum loading amount of 1% GO in GO@SnO2 NF/NSs nanocomposites not only exhibited the highest sensitivity value (Ra/Rg = 280 to 100 ppm HCHO gas) but also lowered the optimum operation temperature from 120 °C to 60 °C. The response value was about 4.5 times higher than that of pure hierarchical SnO2 NF/NSs (Ra/Rg = 64 to 100 ppm). GO@SnO2 NF/NSs nanocomposites showed lower detection limit down to 0.25 ppm HCHO and excellent selectivity against interfering gases (ethanol (C2H5OH), acetone (CH3COCH3), methanol (CH3OH), ammonia (NH3), methylbenzene (C7H8), benzene (C6H6) and water (H2O)). The enhanced sensing performance for HCHO was mainly ascribed to the high specific surface area, suitable electron transfer channels and the synergistic effect of the SnO2 NF/NSs and GO nanosheets network.

| S-EPMC6983051 | biostudies-literature

Highly Dispersed Pt-Incorporated Mesoporous Fe2O3 for Low-Level Sensing of Formaldehyde Gas.

Project description:Highly dispersed Pt-incorporated mesoporous Fe2O3 (Pt/m-Fe2O3) of 4 μm size is prepared through a simple hydrothermal reaction and thermal decomposition procedures. Furthermore, the formaldehyde gas-sensing properties of Pt/m-Fe2O3 are investigated. Compared with our previous mesoporous Fe2O3-based gas sensors, a gas sensor based on 0.2% Pt/m-Fe2O3 shows improved gas response by over 90% in detecting low-level formaldehyde gas at 50 ppb concentration, an enhanced selectivity of formaldehyde gas, and a lower degradation of sensing performance in high-humidity environments. Additionally, the gas sensor exhibits similar properties as the previous sensor, such as operating temperature (275 °C) and long-term stability. The enhancement in formaldehyde gas-sensing performance is attributed to the attractive catalytic chemical sensitization of highly dispersed Pt nanoparticles in the mesoporous Fe2O3 microcube architecture.

| S-EPMC9960270 | biostudies-literature

Facile Hydrothermal Synthesis of SnO2 Nanoflowers for Low-Concentration Formaldehyde Detection.

Project description:In this work, SnO2 nanoflowers were prepared by a simple one-step hydrothermal process. The morphology and structure of SnO2 nanoflowers were characterized by SEM, TEM, Raman spectroscopy, and XRD, which demonstrated the good crystallinity of the SnO2 tetrahedron structure of the as-synthesized materials. In addition, the sensing properties of SnO2 nanoflowers were studied in detail. It was found that the SnO2 nanoflower-based gas sensor exhibits excellent gas response (9.2 to 120 ppm), fast response and recovery (2/15 s to 6 ppm), good linearity of correlation between response (S) vs. concentration (C) (lgS = 0.505 lgC - 0.147, R2 = 0.9863), superb repeatability, and selectivity at 300 °C. The outstanding performance can also be attributed to the high specific surface area ratio and size of SnO2 nanoflowers close to the thickness of the electron depletion layer that can provide abundant active sites, promote the rate of interaction, and make it easier for gas molecules to diffuse into the interior of the material. Therefore, SnO2 nanoflowers can be an ideal sensing material for real-time monitoring of low-concentration HCHO.

| S-EPMC9267946 | biostudies-literature

Graphene nanomesh as highly sensitive chemiresistor gas sensor.

Project description:Graphene is a one atom thick carbon allotrope with all surface atoms that has attracted significant attention as a promising material as the conduction channel of a field-effect transistor and chemical field-effect transistor sensors. However, the zero bandgap of semimetal graphene still limits its application for these devices. In this work, ethanol-chemical vapor deposition (CVD) of a grown p-type semiconducting large-area monolayer graphene film was patterned into a nanomesh by the combination of nanosphere lithography and reactive ion etching and evaluated as a field-effect transistor and chemiresistor gas sensors. The resulting neck-width of the synthesized nanomesh was about ∼20 nm and was comprised of the gap between polystyrene (PS) spheres that was formed during the reactive ion etching (RIE) process. The neck-width and the periodicities of the graphene nanomesh (GNM) could be easily controlled depending on the duration/power of the RIE and the size of the PS nanospheres. The fabricated GNM transistor device exhibited promising electronic properties featuring a high drive current and an I(ON)/I(OFF) ratio of about 6, significantly higher than its film counterpart. Similarly, when applied as a chemiresistor gas sensor at room temperature, the graphene nanomesh sensor showed excellent sensitivity toward NO(2) and NH(3), significantly higher than their film counterparts. The ethanol-based graphene nanomesh sensors exhibited sensitivities of about 4.32%/ppm in NO(2) and 0.71%/ppm in NH(3) with limits of detection of 15 and 160 ppb, respectively. Our demonstrated studies on controlling the neck width of the nanomesh would lead to further improvement of graphene-based transistors and sensors.

| S-EPMC4861156 | biostudies-literature

Palladium nanoparticle-decorated multi-layer Ti3C2T x dual-functioning as a highly sensitive hydrogen gas sensor and hydrogen storage.

Project description:In this work, palladium nanoparticle (PdNP)-decorated Ti3C2T x MXene (Pd-Ti3C2T x ) was synthesized by a simple two-step process. For this, multilayer Ti3C2T x MXene (ML-Ti3C2T x ) was first prepared by a selective HF etching technique, and PdNPs were directly grown on the surface of ML-Ti3C2T x flakes using a polyol method. The relative weight fraction of PdNPs to ML-Ti3C2T x was elaborately controlled to derive the optimal size and distribution of PdNPs, thereby to maximize its performance as a hydrogen sensor. The optimized Pd-Ti3C2T x nanocomposite showed superb hydrogen-sensing capability even at room temperature with sharp, large, reproducible, concentration-dependent, and hydrogen-selective responses. Furthermore, the nanocomposite also unveiled some extent of hydrogen storage capability at room temperature and 77 K, raising a possibility that it can dual-function as a hydrogen sensor and hydrogen storage.

| S-EPMC8694963 | biostudies-literature

Ultralow power consumption gas sensor based on a self-heated nanojunction of SnO2 nanowires.

Project description:The long duration of a working device with a limited battery capacity requires gas sensors with low power consumption. A self-heated gas sensor is a highly promising candidate to satisfy this requirement. In this study, two gas sensors with sparse and dense SnO2 nanowire (NW) networks were investigated under the Joule heating effect at the nanojunction. Results showed that the local heating nanojunction was effective for NO2 sensing but generally not for reduction gases. At 1 μW, the sparse NW sensor showed a good sensing performance to the NO2 gas. The dense SnO2 NW network required a high-power supply for gas-sensitive activation, but was suitable for reduction gases. A power of approximately 500 μW was also needed for a fast recovery time. Notably, the dense NW sensor can response to ethanol and H2S gases. Results also showed that the self-heated sensors were simple in design and reproducible in terms of the fabrication process.

| S-EPMC9089278 | biostudies-literature

Highly sensitive and selective gas sensor using hydrophilic and hydrophobic graphenes.

Project description:New hydrophilic 2D graphene oxide (GO) nanosheets with various oxygen functional groups were employed to maintain high sensitivity in highly unfavorable environments (extremely high humidity, strong acidic or basic). Novel one-headed polymer optical fiber sensor arrays using hydrophilic GO and hydrophobic reduced graphene oxide (rGO) were carefully designed, leading to the selective sensing of volatile organic gases for the first time. The two physically different surfaces of GO and rGO could provide the sensing ability to distinguish between tetrahydrofuran (THF) and dichloromethane (MC), respectively, which is the most challenging issue in the area of gas sensors. The eco-friendly physical properties of GO allowed for faster sensing and higher sensitivity when compared to previous results for rGO even under extreme environments of over 90% humidity, making it the best choice for an environmentally friendly gas sensor.

| S-EPMC3672880 | biostudies-literature

MgO Nanoparticle Modified Anode for Highly Efficient SnO2-Based Planar Perovskite Solar Cells.

Project description:Reducing the energy loss and retarding the carrier recombination at the interface are crucial to improve the performance of the perovskite solar cell (PSCs). However, little is known about the recombination mechanism at the interface of anode and SnO2 electron transfer layer (ETL). In this work, an ultrathin wide bandgap dielectric MgO nanolayer is incorporated between SnO2:F (FTO) electrode and SnO2 ETL of planar PSCs, realizing enhanced electron transporting and hole blocking properties. With the use of this electrode modifier, a power conversion efficiency of 18.23% is demonstrated, an 11% increment compared with that without MgO modifier. These improvements are attributed to the better properties of MgO-modified FTO/SnO2 as compared to FTO/SnO2, such as smoother surface, less FTO surface defects due to MgO passivation, and suppressed electron-hole recombinations. Also, MgO nanolayer with lower valance band minimum level played a better role in hole blocking. When FTO is replaced with Sn-doped In2O3 (ITO), a higher power conversion efficiency of 18.82% is demonstrated. As a result, the device with the MgO hole-blocking layer exhibits a remarkable improvement of all J-V parameters. This work presents a new direction to improve the performance of the PSCs based on SnO2 ETL by transparent conductive electrode surface modification.

| S-EPMC5604382 | biostudies-literature