Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation and Performance of AgNWs/PDMS Film-Based Flexible Strain Sensor.

ABSTRACT: Flexible strain sensors are widely used in the fields of personal electronic equipment and health monitoring to promote the rapid development of modern social science and technology. In this paper, silver nanowires (AgNWs) prepared via the polyol reduction method were used to construct a flexible strain sensor. The AgNWs/PDMS film was obtained by transfer printing using AgNWs as a conductive layer and polydimethylsiloxane (PDMS) as a flexible substrate. The morphology of AgNWs was characterized by SEM and TEM. The aspect ratio of the AgNWs was more than 700. The strain sensitivity factor of the sensor was 2.8757, with a good linear relationship between the resistance and the strain. Moreover, the strain sensor showed good response results in human activity monitoring and the LED lamp response test, which provides a new idea for the construction of flexible wearable devices.

SUBMITTER: Zhu X

PROVIDER: S-EPMC9862830 | biostudies-literature | 2023 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation and Performance of AgNWs/PDMS Film-Based Flexible Strain Sensor.

Zhu Xiaoxin X Zhou Yimin Y Ye Cui C

Materials (Basel, Switzerland) 20230109 2

Flexible strain sensors are widely used in the fields of personal electronic equipment and health monitoring to promote the rapid development of modern social science and technology. In this paper, silver nanowires (AgNWs) prepared via the polyol reduction method were used to construct a flexible strain sensor. The AgNWs/PDMS film was obtained by transfer printing using AgNWs as a conductive layer and polydimethylsiloxane (PDMS) as a flexible substrate. The morphology of AgNWs was characterized ...[more]

PMID: 36676378

Similar Datasets

Integrated Piezoelectric AlN Thin Film with SU-8/PDMS Supporting Layer for Flexible Sensor Array.

Project description:This research focuses on the development of a flexible tactile sensor array consisting of aluminum nitride (AlN) based on micro-electro-mechanical system (MEMS) technology. A total of 2304 tactile sensors were integrated into a small area of 2.5 × 2.5 cm2. Five hundred nm thick AlN film with strong c-axis texture was sputtered on Cr/Au/Cr (50/50/5 nm) layers as the sacrificial layer coated on a Si wafer. To achieve device flexibility, polydimethylsiloxane (PDMS) polymer and SU-8 photoresist layer were used as the supporting layers after etching away a release layer. Twenty-five mM (3-mercaptopropyl) trimethoxysilane (MPTMS) improves the adhesion between metal and polymers due to formation of a self-assembled monolayer (SAM) on the surface of the top electrode. The flexible tactile sensor has 8 × 8 channels and each channel has 36 sensor elements with nine SU-8 bump blocks. The tactile sensor array was demonstrated to be flexible by bending 90 degrees. The tactile sensor array was demonstrated to show clear spatial resolution through detecting the distinct electrical response of each channel under local mechanical stimulus.

| S-EPMC6982933 | biostudies-literature

A Flexible and Highly Sensitive Pressure Sensor Based on AgNWs/NRLF for Hand Motion Monitoring.

Project description:Flexible, highly sensitive, easy fabricating process, low-cost pressure sensors are the trend for flexible electronic devices. Inspired by the softness, comfortable, environmental friendliness and harmless of natural latex mattress, herein, we report an agile approach of constructing a flexible 3D-architectured conductive network by dip-coating silver nanowires (AgNWs) on the natural rubber latex foam (NRLF) substrate that provide the 3D micro-network structure as the skeleton. The variation of the contact transformed into the electrical signal among the conductive three-dimensional random networks during compressive deformation is the piezoresistive effect of AgNWs/NRLF pressure sensors. The resulting AgNWs/NRLF pressure sensors exhibit desirable electrical conductivity (0.45-0.50 S/m), excellent flexibility (58.57 kPa at 80% strain), good hydrophobicity (~128° at 5th dip-coated times) and outstanding repeatability. The AgNWs/NRLF sensors can be assembled on a glove to detect hand motion sensitively such as bending, touching and holding, show potential application such as artificial skin, human prostheses and health monitoring in multifunctional pressure sensors.

| S-EPMC6669722 | biostudies-literature

High-performance flexible strain sensors based on silver film wrinkles modulated by liquid PDMS substrates† † Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3ra06020a

Project description: Not available

| S-EPMC10654890 | biostudies-literature

Development of High-Performance Flexible Radiative Cooling Film Using PDMS/TiO<sub>2</sub> Microparticles.

Project description:Radiative cooling, which cools an object below its surrounding temperature without any energy consumption, is one of the most promising techniques for zero-energy systems. In principle, the radiative cooling technique reflects incident solar energy and emits its thermal radiation energy into outer space. To achieve maximized cooling performance, it is crucial to attain high spectral reflectance in the solar spectrum (0.3-2.5 μm) and high spectral emittance in the atmospheric window (8-13 μm). Despite the development of various radiative cooling techniques such as photonic crystals and metamaterials, applying the cooling technology in practical applications remains challenging due to its low flexibility and complicated manufacturing processes. Here, we develop a high-performance radiative cooling film using PDMS/TiO2 microparticles. Specifically, the design parameters such as microparticle diameter, microparticle volume fraction, and film thickness are considered through optical analysis. Additionally, we propose a novel fabrication process using low viscosity silicone oil for practical fabrication. The fabricated film accomplishes 67.1 W/m2 of cooling power, and we also analyze the cooling performance difference depending on the fabrication process based on the measurement and optical calculation results.

| S-EPMC10745724 | biostudies-literature

Development of a Waterproof Crack-Based Stretchable Strain Sensor Based on PDMS Shielding.

Project description:This paper details the design of a poly(dimethylsiloxane) (PDMS)-shielded waterproof crack-based stretchable strain sensor, in which the electrical characteristics and sensing performance are not influenced by changes in humidity. This results in a higher number of potential applications for the sensor. A previously developed omni-purpose stretchable strain (OPSS) sensor was used as the basis for this work, which utilizes a metal cracking structure and provides a wide sensing range and high sensitivity. Changes in the conductivity of the OPSS sensor, based on humidity conditions, were investigated along with the potential possibility of using the design as a humidity sensor. However, to prevent conductivity variation, which can decrease the reliability and sensing ability of the OPSS sensor, PDMS was utilized as a shielding layer over the OPSS sensor. The PDMS-shielded OPSS sensor showed approximately the same electrical characteristics as previous designs, including in a high humidity environment, while maintaining its strain sensing capabilities. The developed sensor shows promise for use under high humidity conditions and in underwater applications. Therefore, considering its unique features and reliable sensing performance, the developed PDMS-shielded waterproof OPSS sensor has potential utility in a wide range of applications, such as motion monitoring, medical robotics and wearable healthcare devices.

| S-EPMC5948561 | biostudies-literature

Flexible Highly Sensitive Pressure Sensor Based on Ionic Liquid Gel Film.

Project description:Flexible, semitransparent ionic liquid gel (ionogels) film was first fabricated by in situ polymerization. The optimized ionogels exhibited excellent mechanical properties, high conductivity, and force sensing characteristics. The multifunctional sensor based on the ionogel film was constructed and provided the high sensitivity of 15.4 kPa-1 and wide detection range sensing from 5 Pa to 5 kPa. Moreover, the aforementioned sensor demonstrated excellent mechanical stability against repeated external deformations (for 3000 cycles under 90° bending). Importantly, the sensor showed advantages in detection of environmental changes to the external stimulus of subtle signals, including a rubber blower blowing the sensor, gently touching, torsion, and bending.

| S-EPMC6641298 | biostudies-literature

Flexible Tactile Electronic Skin Sensor with 3D Force Detection Based on Porous CNTs/PDMS Nanocomposites.

Project description:Flexible tactile sensors have broad applications in human physiological monitoring, robotic operation and human-machine interaction. However, the research of wearable and flexible tactile sensors with high sensitivity, wide sensing range and ability to detect three-dimensional (3D) force is still very challenging. Herein, a flexible tactile electronic skin sensor based on carbon nanotubes (CNTs)/polydimethylsiloxane (PDMS) nanocomposites is presented for 3D contact force detection. The 3D forces were acquired from combination of four specially designed cells in a sensing element. Contributed from the double-sided rough porous structure and specific surface morphology of nanocomposites, the piezoresistive sensor possesses high sensitivity of 12.1 kPa-1 within the range of 600 Pa and 0.68 kPa-1 in the regime exceeding 1 kPa for normal pressure, as well as 59.9 N-1 in the scope of < 0.05 N and > 2.3 N-1 in the region of < 0.6 N for tangential force with ultra-low response time of 3.1 ms. In addition, multi-functional detection in human body monitoring was employed with single sensing cell and the sensor array was integrated into a robotic arm for objects grasping control, indicating the capacities in intelligent robot applications.

| S-EPMC7770749 | biostudies-literature

A thin-film temperature sensor based on a flexible electrode and substrate.

Project description:Accurate temperature measurements can efficiently solve numerous critical problems and provide key information. Herein, a flexible micro-three-dimensional sensor, with a combination of platinum and indium oxide to form thermocouples, is designed and fabricated by a microfabrication process to achieve in situ real-time temperature measurements. The stability and reliability of the sensor are greatly improved by optimizing the process parameters, structural design, and preparation methods. A novel micro-three-dimensional structure with better malleability is designed, which also takes advantage of the fast response of a two-dimensional thin film. The as-obtained flexible temperature sensor with excellent stability and reliability is expected to greatly contribute to the development of essential components in various emerging research fields, including bio-robot and healthcare systems. The model of the application sensor in a mask is further proposed and designed to realize the collection of health information, reducing the number of deaths caused by the lack of timely detection and treatment of patients.

| S-EPMC8166532 | biostudies-literature

Highly Sensitive Ultrathin Flexible Thermoplastic Polyurethane/Carbon Black Fibrous Film Strain Sensor with Adjustable Scaffold Networks.

Project description:In recently years, high-performance wearable strain sensors have attracted great attention in academic and industrial. Herein, a conductive polymer composite of electrospun thermoplastic polyurethane (TPU) fibrous film matrix-embedded carbon black (CB) particles with adjustable scaffold network was fabricated for high-sensitive strain sensor. This work indicated the influence of stereoscopic scaffold network structure built under various rotating speeds of collection device in electrospinning process on the electrical response of TPU/CB strain sensor. This structure makes the sensor exhibit combined characters of high sensitivity under stretching strain (gauge factor of 8962.7 at 155% strain), fast response time (60 ms), outstanding stability and durability (> 10,000 cycles) and a widely workable stretching range (0-160%). This high-performance, wearable, flexible strain sensor has a broad vision of application such as intelligent terminals, electrical skins, voice measurement and human motion monitoring. Moreover, a theoretical approach was used to analyze mechanical property and a model based on tunneling theory was modified to describe the relative change of resistance upon the applied strain. Meanwhile, two equations based from this model were first proposed and offered an effective but simple approach to analyze the change of number of conductive paths and distance of adjacent conductive particles.

| S-EPMC8187661 | biostudies-literature

Flexible sensor matrix film-based wearable plantar pressure force measurement and analysis system.

Project description:Plantar pressure force data derived from gait and posture are commonly used as health indicators for foot diagnosis, injury prevention, and rehabilitation. This study developed a wearable plantar pressure force measurement and analysis (WPPFMA) system based on a flexible sensor matrix film to monitor plantar pressure force in real time. The developed system comprised a flexible sensor matrix film embedded in the insole of the shoe, a wearable data acquisition (DAQ) device with a Bluetooth module, and dedicated software with an intuitive graphical user interface for displaying the plantar pressure force data from receivers by using a terminal unit (laptop or smart-phone). The flexible sensor matrix film integrated 16 piezoresistive cell sensors to detect pressure force at different anatomical zones of the plantar and under different body positions. The signals from the flexible sensor matrix film were collected using the DAQ module embedded in the shoe and transmitted to the receivers through Bluetooth. The real-time display and analysis software can monitor, visualize, and record the detailed plantar pressure force data, such as average pressure force, maximum pressure force, and pressure force distributions and variations over time. The outcomes of the trials in which the system was worn revealed the applicability of the developed WPPFMA system for monitoring plantar pressure force under static and dynamic wearing conditions. The plantar pressure force data derived from this system provide valuable insights for personal foot care, gait analysis, and clinical diagnosis.

| S-EPMC7413492 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data