Reduced Graphene Oxide-Modified Spinel Cobalt Ferrite Nanocomposite: Synthesis, Characterization, and Its Superior Adsorption Performance for Dyes and Heavy Metals
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC9948210 | biostudies-literature | 2023 Feb
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A two-step process was applied to synthesize the cobalt ferrite-graphene composite materials in a one-pot hydrothermal reaction process. Graphene Oxide (GO) was synthesized by a modified Hummer's method. The synthesized composite materials were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR). The XRD and FTIR results were in good agreement with the TGA/DTG observations. SEM and TEM disclosed the spherical shape of the nanoparticles in 4-10 nm. The optimized CoFe2O4-G (1-5 wt.%) composite materials samples were tried for their conductivity, supercapacity, and corrosion properties. The CV results demonstrated a distinctive behavior of the supercapacitor, while the modified CoFe2O4-G (5 wt.%) electrode demonstrated a strong reduction in the Rct value (~94 Ω). The highest corrosion current density valves and corrosion rates were attained in the CoFe2O4-G (5 wt.%) composite materials as 5.53 and 0.20, respectively. The high conductivity of graphene that initiated the poor corrosion rate of the CoFe2O4-graphene composite materials could be accredited to the high conductivity and reactivity.
| S-EPMC8538039 | biostudies-literature
Project description:In this paper, functionalized sodium alginate hydrogel (FSAH) was prepared to efficiently adsorb heavy metals and dyes. Hydrazide-functionalized sodium alginate (SA) prepared hydrazone groups to selectively capture heavy metals (Pb2+, Cd2+, and Cu2+), and another functional group (dopamine grafting), serves as sites for adsorption methylene blue (MB), malachite green (MG), crystal violet (CV). Thermodynamic parameters of adsorption indicated that the adsorption process is endothermic and spontaneous. The heavy metals adsorption by FSAH was physical adsorption mainly due to ΔHθ < 40 kJ/mol, and the adsorption of cationic dyes fitted with the Langmuir models, which indicated that the monolayer adsorption is dominated by hydrogen bonds, electrostatic interactions, and π-π interactions. Moreover, the adsorption efficiency maintained above 70% after five adsorption-desorption cycles. To sum up, FSAH has great application prospect.
| S-EPMC9222840 | biostudies-literature
Project description:By taking advantage of cellulose, graphene oxide (GO), and the process for crosslinking using epichlorohydrin (ECH), we propose a simple and novel method to prepare GO/cellulose hydrogel with good potential to adsorb metal ions. GO nanosheets containing carboxyl and hydroxyl groups were introduced into the surface of the cellulose hydrogel with retention of the gel structure and its nanoporous property. Due to the introduction of GO, the GO/cellulose composite hydrogels exhibited good compressive strength. Adsorption capacity of Cu2+ significantly increases with an increase in the GO/cellulose ratio and GO/cellulose hydrogel showed high adsorption rates. The calculated adsorption capacities at equilibrium ( q e cal ) for GO/cellulose hydrogel (GO:cellulose = 20:100 in weight) was up to 94.34 mg·g-1, which was much higher than that of the pristine cellulose hydrogels. Furthermore, GO/cellulose hydrogel exhibited high efficient regeneration and metal ion recovery, and high adsorption capacity for Zn2+, Fe3+, and Pb2+.
| S-EPMC5456948 | biostudies-other
Project description:The increased discharge of water pollutants drives the development of new and effective wastewater remediation methods. Herein, a magnetic nanocomposite of chitosan-graphene oxide (GO) decorated with copper ferrite (MCSGO) was synthesized under ultrasound agitation and applied to the effective removal of Safranin O (SAF) and indigo carmine (IC) dyes from wastewater. The structural, magnetic, and physicochemical features of the as-prepared MCSGO nanocomposite have been thoroughly investigated using various characterization techniques. The operational parameters such as MCSGO mass, contact time, pH, and initial dye concentration were investigated. The effects of diverse coexisting species on both dye elimination processes were examined. The experimental results demonstrated that the adsorption capacity of MCSGO nanocomposite for IC and SAF was 112.6 and 66.15 mg g-1, respectively. Five different adsorption isotherms were investigated using two-parameter (Langmuir, Tekman, and Freundlich) and three-parameter (Sips, and Redlich-Peterson) models. Thermodynamic studies revealed that the elimination of both dyes on MCSGO nanocomposite was endothermic and spontaneous, with anionic and cationic dye molecules randomly arranged onto the adsorbent nanoparticles. Moreover, the mechanism of dye elimination was deduced. Furthermore, even after five cycles of adsorption and desorption, the as-prepared nanocomposite showed no significant loss in the dye removal efficiency, indicating that it has superior stability and recycling potential.
| S-EPMC9923217 | biostudies-literature
Project description:The preparation of mercapto-reduced graphene oxides (m-RGOs) via a solvothermal reaction using P4S10 as a thionating agent has demonstrated their potential as an absorbent for scavenging heavy metal ions, particularly Pb2+, from aqueous solutions due to the presence of thiol (-SH) functional groups on their surface. The structural and elemental analysis of m-RGOs was conducted using a range of techniques, including X-ray diffraction (XRD), Raman spectroscopy, optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy equipped with energy-dispersive spectroscopy (STEM-EDS), and X-ray photoelectron spectroscopy (XPS). At pH 7 and 25 °C, the maximum adsorption capacity of Pb2+ ions on the surface of m-RGOs was determined to be approximately 858 mg/g. The heavy metal-S binding energies were used to determine the percent removal of the tested heavy metal ions, with Pb2+ exhibiting the highest percentage removal, followed by Hg2+ and Cd2+ ions having the lowest percent removal, and the binding energies observed were Pb-S at 346 kJ/mol, Hg-S at 217 kJ/mol, and Cd-S at 208 kJ/mol. The time-dependent removal study of Pb2+ ions also yielded promising results, with almost 98% of Pb2+ ions being removed within 30 min at pH 7 and 25 °C using a 1 ppm Pb2+ solution as the test solution. The findings of this study clearly demonstrate the potential and efficiency of thiol-functionalized carbonaceous material for the removal of environmentally harmful Pb2+ from groundwater.
| S-EPMC10220523 | biostudies-literature
Project description:Magnetic Co0.5Mn0.5Fe2O4 nanoparticles were successfully prepared via the combustion and calcination process, with an average particle diameter of 31.5 nm and a saturation magnetization of 25.25 emu·g-1, they were employed to adsorbe Congo red (CR) from wastewater, the Pseudo-second-order kinetic and Freundlich isotherm were consistent with the adsorption data, indicating that their adsorption was a multilayer chemisorption process, the thermodynamic investigation showed that the adsorption was a favored exothermic process. The ionic strength of Cl- in CR solution had no obvious effect on the adsorption efficiency of Co0.5Mn0.5Fe2O4 nanoparticles, and the maximum adsorbance was 58.3 mg·g-1 at pH 2, decreasing as the pH of the CR solutions increased from 2 to 12. The ion leaching experiment and XRD demonstrated that Co0.5Mn0.5Fe2O4 nanoparticles had excellent stability, and the relative removal rate was 93.85% of the first time after 7 cycles. Cyclic voltammetry and electrochemical impedance spectroscopy demonstrated that CR was adsorbed onto Co0.5Mn0.5Fe2O4 nanoparticles, and the electrical conductivity of Co0.5Mn0.5Fe2O4 nanoparticles decreased after adsorption of CR. Magnetic Co0.5Mn0.5Fe2O4 nanoparticles displayed a promising application in wastewater treatment.
| S-EPMC11463770 | biostudies-literature
Project description:Wastewater contaminated by heavy metal ions poses serious threats to the ecosystem, needing to be well disposed of. In this study, reduced graphene oxide@titanate hybrids (rGOTHs) are synthesized to efficiently remove heavy metals from wastewater in batch and fixed bed systems. The size of prepared rGOTHs is large as hundreds of microns, which is beneficial for separation and application in batch and fixed bed system. In the batch studies, rGOTHs exhibits the fast adsorption rate and high adsorption capacity towards heavy metals, in which the adsorption kinetic and isothermal are best fitted to Pseudo-second-order kinetic model and Langmuir model, respectively. The maximum adsorption capacities of rGOTHs for Pb(II), Cd(II) and Cu(II) are 530.5, 201 and 130.5 mg/g at 298 K and pH 5, respectively. In addition, the exhausted adsorbent can be easily regenerated in alkaline hydrothermal process and the high removal efficiency is almost reserved after six cycles. Moreover, rGOTHs presents higher selective adsorption towards Pb(II) than other ions. Adsorption mechanisms are revealed to be ions exchange, electrostatic interaction, and coordination. In the fixed bed experiments, the effective treatment volume of rGOTHs-loaded column reaches to 2760 BV (15.45 L) for single Pb(II) polluted battery manufactory wastewater and 2280 BV (12.76 L) for multiple heavy metal polluted estuary effluent, before Pb(II) concentration exceeds the discharge limit of 1 mg/L. Our study demonstrates the great potential of rGOTHs to be applied in practical treatment of wastewater contaminated by heavy metal ions.
| S-EPMC11917053 | biostudies-literature
Project description:Herein, we presented electromagnetic interference shielding characteristics of NiFe2O4 nanoparticles-in-situ thermally-reduced graphene oxide (RGO)-polypropylene nanocomposites with the variation of reduced graphene oxide content. The structural, morphological, magnetic, and electromagnetic parameters and mechanical characteristics of fabricated nanocomposites were investigated and studied in detail. The controllable composition of NiFe2O4-RGO-Polypropylene nanocomposites exhibited electromagnetic interference (EMI) shielding effectiveness (SE) with a value of 29.4 dB at a thickness of 2 mm. The enhanced EMI shielding properties of nanocomposites with the increase of RGO content could be assigned to enhanced attenuation ability, high conductivity, dipole and interfacial polarization, eddy current loss, and natural resonance. The fabricated lightweight NiFe2O4-RGO-Polypropylene nanocomposites have potential as a high performance electromagnetic interference shielding nanocomposite.
| S-EPMC6523113 | biostudies-literature
Project description:Unconventional resources, such as heavy oil, are increasingly being explored and exploited due to the declining availability of conventional petroleum resources. Heavy crude oil poses challenges in production, transportation, and refining, due to its high viscosity, low API gravity, and elevated sulfur and metal content. Improving the quality of heavy oil can be achieved through the application of steam injection, which lowers the oil's viscosity and enhances its flow. However, steam injection alone falls short of meeting the growing demand for higher-quality petroleum products. Catalytic upgrading is therefore being investigated as a viable solution to improve heavy oil quality. This study experimentally investigates the application of two novel catalysts, namely copper-substituted zinc ferrite (ZCFO) synthesized via the sol-gel combustion method and a graphene oxide-based nanocomposite (GO-ZCFO) with different ratios, for catalyzing aquathermolysis reactions in the steam injection process, with the aim of enhancing the in-situ upgrading of heavy oil. These catalysts underwent characterization using X-ray powder diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Transmission Electron Microscopy (TEM). Their catalytic performance was assessed utilizing a high-pressure/high-temperature reactor (300 ml), with a comprehensive analysis of the changes in the physical and chemical properties of the heavy oil before and after upgrading. This analysis included measurements of sulfur content, SARA fractions, viscosity, API gravity, and Gas Chromatography (GC) of saturated hydrocarbons and evolved gases. All upgrading experiments, including both catalytic and non-catalytic aquathermolysis processes, were conducted under a reaction time of 6 h, a reaction temperature of 320 °C, and high pressure (86-112 bar). The results indicated that the introduction of the proposed catalysts as additives into the upgrading system resulted in a significant reduction in sulfur content. This, in turn, led to a decrease in resin and asphaltene content, an increase in the content of saturated hydrocarbon, particularly low-molecular-weight alkanes, and ultimately, a reduction in viscosity along with higher API gravity of the crude oil. GO-ZCFO with a weight ratio (50:50) exhibited the best catalytic performance. The heavy crude oil, upgraded with this 50:50 ratio, exhibited significant enhancements, including a 29.26% reduction in sulfur content, a 21.27% decrease in resin content, a 37.60% decrease in asphaltene content, a 46.92% increase in saturated hydrocarbon content, a 66.48% reduction in viscosity, and a 25.49% increase in API gravity. In comparison, the oil upgraded through non-catalytic aquathermolysis showed only marginal improvements, with slight reductions in sulfur content by 5.41%, resin content by 3.60%, asphaltene content by 11.36%, viscosity by 17.89%, and inconsiderable increases in saturated hydrocarbon content by 9.9% and API gravity by 3.02%. The GO-ZCFO, with its high catalytic activity, stands as a promising catalyst that contributes to improving the in-situ upgrading and thermal conversion of heavy crude oil.
| S-EPMC11519547 | biostudies-literature
Project description:The present study investigated the use of a nanocomposite, produced by reinforcing nanosize zinc ferrite (ZnFe2O4) in a porous β-CD based polymeric matrix (β-CD-E-T/ZnFe2O4), for the removal of Bisphenol A (BPA) from aqueous solutions via adsorption. The thermal stability of the β-CD-based polymer and β-CD-E-T/ZnFe2O4 nanocomposite were investigated using simultaneous thermal analysis at four heating rates. Non-isothermal isoconversion methods were employed to study the thermal degradation kinetics of the β-CD based polymer before and after ZnFe2O4 nano-filling. The results showed that ZnFe2O4 nano-reinforcement increased the activation energy barrier for the thermal degradation of the β-CD-based polymeric matrix. Adsorption experiments showed that the β-CD-E-T/ZnFe2O4 nanocomposite exhibited very high BPA adsorption within 5 minutes. Isotherm, kinetics, and thermodynamic investigations revealed that the adsorption of BPA was via multilayer adsorption on a heterogeneous β-CD-E-T/ZnFe2O4 surface. The thermodynamic studies indicated that BPA adsorption on β-CD-E-T/ZnFe2O4 was spontaneous and exothermic. Overall, the β-CD-E-T/ZnFe2O4 nanocomposite showed less thermal degradation and high efficiency for removing BPA from contaminated water, indicating its potential as a promising material for wastewater treatment applications.
| S-EPMC10358182 | biostudies-literature