Purification and characterization of a new endoglucanase from Clostridium thermocellum.
Ontology highlight
ABSTRACT:
SUBMITTER: Romaniec MP
PROVIDER: S-EPMC1130994 | biostudies-other | 1992 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The extracellular cellulolytic enzymes of the thermophilic anaerobe Clostridium thermocellum occur as a protein complex or aggregate known as the cellulosome. By using a combination of ion-exchange, adsorption and hydrophobic-interaction chromatography, it was possible to isolate from extracellular broth a specific endoglucanase of interest without the use of denaturants. The endoglucanase was identified as the cellulosomal subunit Ss by the use of specific antibodies. The enzyme has an Mr of 83,000, an isoelectric point of 3.55, optimum pH of 6.6 and optimum temperature of 70 degrees C. It hydrolyses CM-cellulose and, at a higher rate, the cellodextrins, cellotetraose and cellopentaose, but does not hydrolyse a crystalline cellulose such as Avicel. Cellobiose and cellotriose are also immune to attack. It differs from endoglucanases previously isolated by others and a 76,000-Mr endoglucanase recently isolated in this laboratory.
| S-EPMC1151547 | biostudies-other
Project description:An endoglucanase (1,4-beta-D-glucan glucanohydrolase, EC 3.2.1.4) was purified from Clostridium thermocellum by procedures that included centrifugation, ultrafiltration, selective precipitation, ion-exchange Sephadex chromatography and preparative gel electrophoresis. The 22-fold-purified enzyme behaved as a homogeneous protein under non-denaturing conditions. The enzyme represented a significant component (greater than 25%) of total extracellular endoglucanase activity, but was purified in low yield by the procedures employed. The native molecular weight of the endoglucanase was determined by ultracentrifugational analysis, amino acid composition and polyacrylamide-gel electrophoresis, and varied between 83000 and 94000. The enzyme contained 11.2% carbohydrate and was isoelectric at pH 6.72. The pH and temperature optima of the endoglucanase were 5.2 and 62 degrees C respectively. The enzyme lacked cysteine and was low in sulphur-containing amino acids. The purified endoglucanase displayed: high activity towards carboxymethylcellulose, celloheptaose, cellohexaose and cellopentaose; low activity towards Avicel microcrystalline cellulose and cellotetraose; no detectable activity towards cellotriose or cellobiose; increased activity towards cello-oligosaccharides with increasing degree of polymerization. The internal glycosidic bonds of cello-oligosaccharides were cleaved by the enzyme in preference to external linkages. The apparent Michaelis constant ([S]0.5V) and Vmax. for cellopentaose and cellohexaose hydrolysis were 2.30 mM and 39.3 mumol/min per mg of protein, and 0.56 mM and 58.7 mumol/min per mg of protein, respectively.
| S-EPMC1163377 | biostudies-other
Project description:The use of thermostable cellulases is advantageous for the breakdown of lignocellulosic biomass toward the commercial production of biofuels. Previously, we have demonstrated the engineering of an enhanced thermostable family 8 cellulosomal endoglucanase (EC 3.2.1.4), Cel8A, from Clostridium thermocellum, using random error-prone PCR and a combination of three beneficial mutations, dominated by an intriguing serine-to-glycine substitution (M. Anbar, R. Lamed, E. A. Bayer, ChemCatChem 2:997-1003, 2010). In the present study, we used a bioinformatics-based approach involving sequence alignment of homologous family 8 glycoside hydrolases to create a library of consensus mutations in which residues of the catalytic module are replaced at specific positions with the most prevalent amino acids in the family. One of the mutants (G283P) displayed a higher thermal stability than the wild-type enzyme. Introducing this mutation into the previously engineered Cel8A triple mutant resulted in an optimized enzyme, increasing the half-life of activity by 14-fold at 85°C. Remarkably, no loss of catalytic activity was observed compared to that of the wild-type endoglucanase. The structural changes were simulated by molecular dynamics analysis, and specific regions were identified that contributed to the observed thermostability. Intriguingly, most of the proteins used for sequence alignment in determining the consensus residues were derived from mesophilic bacteria, with optimal temperatures well below that of C. thermocellum Cel8A.
| S-EPMC3346478 | biostudies-literature
Project description:The cellulosome, a highly elaborate extracellular multi-enzyme complex of cellulases and hemicellulases, is responsible for the degradation of plant cell walls. The xylanase CtXyl5A (Cthe_2193) is a multimodular arabinoxylanase which is one of the largest components of the Clostridium thermocellum cellulosome. The N-terminal catalytic domain of CtXyl5A, which is a member of glycoside hydrolase family 5 (GH5), is responsible for the hydrolysis of arabinoxylans. Appended after it are three noncatalytic carbohydrate-binding modules (CBMs), which belong to families 6 (CBM6), 13 (CBM13) and 62 (CBM62). In addition, CtXyl5A has a fibronectin type III-like (Fn3) module preceding the CBM62 and a type I dockerin (DOK) module following it which allows the enzyme to be integrated into the cellulosome through binding to a cohesin module of the protein scaffold CipA. Crystals of the pentamodular enzyme without the DOK module at the C-terminus, with the domain architecture CtGH5-CBM6-CBM13-Fn3-CBM62, have been obtained. The structure of this pentamodular xylanase has been determined by molecular replacement to a resolution of 2.64?Å using coordinates of CtGH5-CBM6, Fn3 and CBM62 from the PDB as search models.
| S-EPMC3144809 | biostudies-literature
Project description:BACKGROUND:Clostridium thermocellum is a paradigm for efficient cellulose degradation and a promising organism for the production of second generation biofuels. It owes its high degradation rate on cellulosic substrates to the presence of supra-molecular cellulase complexes, cellulosomes, which comprise over 70 different single enzymes assembled on protein-backbone molecules of the scaffold protein CipA. RESULTS:Although all 24 single-cellulosomal cellulases were described previously, we present the first comparative catalogue of all these enzymes together with a comprehensive analysis under identical experimental conditions, including enzyme activity, binding characteristics, substrate specificity, and product analysis. In the course of our study, we encountered four types of distinct enzymatic hydrolysis modes denoted by substrate specificity and hydrolysis product formation: (i) exo-mode cellobiohydrolases (CBH), (ii) endo-mode cellulases with no specific hydrolysis pattern, endoglucanases (EG), (iii) processive endoglucanases with cellotetraose as intermediate product (pEG4), and (iv) processive endoglucanases with cellobiose as the main product (pEG2). These modes are shown on amorphous cellulose and on model cello-oligosaccharides (with degree of polymerization DP 3 to 6). Artificial mini-cellulosomes carrying combinations of cellulases showed their highest activity when all four endoglucanase-groups were incorporated into a single complex. Such a modeled nonavalent complex (n = 9 enzymes bound to the recombinant scaffolding protein CipA) reached half of the activity of the native cellulosome. Comparative analysis of the protein architecture and structure revealed characteristics that play a role in product formation and enzyme processivity. CONCLUSIONS:The identification of a new endoglucanase type expands the list of known cellulase functions present in the cellulosome. Our study shows that the variety of processivities in the enzyme complex is a key enabler of its high cellulolytic efficiency. The observed synergistic effect may pave the way for a better understanding of the enzymatic interactions and the design of more active lignocellulose-degrading cellulase cocktails in the future.
| S-EPMC5651568 | biostudies-literature
Project description:The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.
| S-EPMC204732 | biostudies-other
Project description:BackgroundIncreasing the efficiency of enzymatic biomass degradation is crucial for a more economically feasible conversion of abundantly available plant feedstock. Synergistic effects between the enzymes deployed in the hydrolysis of various hemicelluloses have been demonstrated, which can reduce process costs by lowering the amount of enzyme required for the reaction. Xyloglucan is the only major hemicellulose for which no such effects have been described yet.ResultsWe report the beneficial combination of two enzymes for the degradation of the hemicellulose xyloglucan. The addition of ?-galactosidase Bga2B from Clostridium stercorarium to an in vitro hydrolysis reaction of a model xyloglucan substrate increased the enzymatic efficiency of endoglucanase Cel9D from Clostridium thermocellum to up to 22-fold. Furthermore, the total amount of enzyme required for high hydrolysis yields was lowered by nearly 80%. Increased yields were also observed when using a natural complex substrate-tamarind kernel powder.ConclusionThe findings of this study may improve the valorization of feedstocks containing high-xyloglucan amounts. The combination of the endoglucanase Cel9D and the ?-galactosidase Bga2B can be used to efficiently produce the heptasaccharide XXXG. The exploitation of one specific oligosaccharide may open up possibilities for the use as a prebiotic or platform chemical in additional reactions.
| S-EPMC6122707 | biostudies-literature
Project description:Endoglucanase D (EC 3.2.1.4; EGD) from Clostridium thermocellum is rapidly (k = 216 M-1.min-1) and almost completely (greater than 95%) inactivated with Woodward's reagent K (N-ethyl-5-phenylisoxazolium-3'-sulphonate). Spectrophotometric analysis at 340 nm reveals that eight carboxy residues react, whereas specific ligands protect one residue against modification. The enzyme retains it full activity under the latter conditions. The kinetics and pH-dependence of inactivation point towards the involvement of one or more essential carboxy groups with a pKa of 5.7-5.8. Samples modified in the absence or presence of ligand were analysed by reversed-phase liquid chromatography after proteolysis with subtilisin. Dual-wavelength monitoring at 214 and 340 nm during this fractionation leads to the identification of a putatively active-site peptide (Gly-508-Ala-562) which was further characterized by amino acid and partial N-terminal sequence analyses. Asp-546 and Glu-555 are postulated as possible active-site residues. This follows from alignments using ten endoglucanase sequences belonging to the same family. Strong local conservation suggests that this C-terminal sequence is structurally and/or functionally important.
| S-EPMC1132783 | biostudies-other
Project description:Clostridium thermocellum endoglucanase D (EC 3.2.1.4: EGD), which is encoded by the celD gene, was found to bind Ca2+ with an association constant of 2.03 x 10(6) M-1. Ca2+ stimulated the activity of EGD towards swollen Avicel by 2-fold. In the presence of Ca2+, the Kd of the enzyme towards p-nitrophenyl-beta-D-cellobioside and carboxymethylcellulose was decreased by 4-fold. Furthermore, Ca2+ increased the half-life of the enzyme at 75 degrees C from 13 to 47 min. Since the 3' sequence of celD encodes a duplicated region sharing similarities with the Ca2+-binding site of several Ca2+-binding proteins, a deleted clone was constructed and used to purify a truncated form of the enzyme which no longer contained the duplicated region. The truncated enzyme was very similar to EGD expressed from the intact gene with respect to activity, Ca2(+)-binding kinetics and Ca2+ effects on substrate binding and thermostability. Thus the latter parameters do not appear to be mediated through the duplicated conserved region.
| S-EPMC1136638 | biostudies-other
Project description:The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.
| S-EPMC145334 | biostudies-literature