Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Calponin induces actin polymerization at low ionic strength and inhibits depolymerization of actin filaments.

ABSTRACT: Calponin from chicken gizzard induced polymerization of actin in the presence of 10 mM KCl. Only 2 min after the addition of KCl in the presence of a 0.0625-0.25:1 molar ratio of calponin to actin, a Poisson-type length distribution (with an average length of approx. 0.7 micron) was observed with formed actin filaments. This result suggests that calponin-actin complexes served as nuclei for rapid elongation. Calponin caused a rapid polymerization of actin even in G-buffer (2 mM Tris/HCl, pH 8.0) which is usually used for depolymerization of actin filaments. Binding of calponin at a level of up to 1.25 mol per mol of actin was observed in the actin filaments formed in the presence of calponin at very low ionic strengths. When actin filaments were exposed to 3.3 mM KCl, by dilution with G-buffer, a rapid depolymerization occurred. Addition of calponin greatly retarded the depolymerization process and, in the presence of an equimolar ratio of calponin to actin, depolymerization hardly occurred. In the presence of calmodulin, this inhibitory effect on depolymerization was reversed by Ca2+, releasing calponin from actin filaments.

SUBMITTER: Kake T

PROVIDER: S-EPMC1136302 | biostudies-other | 1995 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The natural product cucurbitacin E inhibits depolymerization of actin filaments.

Project description:Although small molecule actin modulators have been widely used as research tools, only one cell-permeable small molecule inhibitor of actin depolymerization (jasplakinolide) is commercially available. We report that the natural product cucurbitacin E inhibits actin depolymerization and show that its mechanism of action is different from jasplakinolide. In assays using pure fluorescently labeled actin, cucurbitacin E specifically affects depolymerization without affecting polymerization. It inhibits actin depolymerization at substoichiometric concentrations up to 1:6 cucurbitacin E:actin. Cucurbitacin E specifically binds to filamentous actin (F-actin) forming a covalent bond at residue Cys257, but not to monomeric actin (G-actin). On the basis of its compatibility with phalloidin staining, we show that cucurbitacin E occupies a different binding site on actin filaments. Using loss of fluorescence after localized photoactivation, we found that cucurbitacin E inhibits actin depolymerization in live cells. Cucurbitacin E is a widely available plant-derived natural product, making it a useful tool to study actin dynamics in cells and actin-based processes such as cytokinesis.

| S-EPMC3448819 | biostudies-literature

Calponin-homology domain mediated bending of membrane-associated actin filaments.

Project description:Actin filaments are central to numerous biological processes in all domains of life. Driven by the interplay with molecular motors, actin binding and actin modulating proteins, the actin cytoskeleton exhibits a variety of geometries. This includes structures with a curved geometry such as axon-stabilizing actin rings, actin cages around mitochondria and the cytokinetic actomyosin ring, which are generally assumed to be formed by short linear filaments held together by actin cross-linkers. However, whether individual actin filaments in these structures could be curved and how they may assume a curved geometry remains unknown. Here, we show that 'curly', a region from the IQGAP family of proteins from three different organisms, comprising the actin-binding calponin-homology domain and a C-terminal unstructured domain, stabilizes individual actin filaments in a curved geometry when anchored to lipid membranes. Although F-actin is semi-flexible with a persistence length of ~10 μm, binding of mobile curly within lipid membranes generates actin filament arcs and full rings of high curvature with radii below 1 μm. Higher rates of fully formed actin rings are observed in the presence of the actin-binding coiled-coil protein tropomyosin and when actin is directly polymerized on lipid membranes decorated with curly. Strikingly, curly induced actin filament rings contract upon the addition of muscle myosin II filaments and expression of curly in mammalian cells leads to highly curved actin structures in the cytoskeleton. Taken together, our work identifies a new mechanism to generate highly curved actin filaments, which opens a range of possibilities to control actin filament geometries, that can be used, for example, in designing synthetic cytoskeletal structures.

| S-EPMC8315802 | biostudies-literature

Depolymerization of actin filaments by Cucurbitacin I through binding G‐actin

Project description: Not available

| S-EPMC10867458 | biostudies-literature

Ionic wave propagation along actin filaments.

Project description:We investigate the conditions enabling actin filaments to act as electrical transmission lines for ion flows along their lengths. We propose a model in which each actin monomer is an electric element with a capacitive, inductive, and resistive property due to the molecular structure of the actin filament and viscosity of the solution. Based on Kirchhoff's laws taken in the continuum limit, a nonlinear partial differential equation is derived for the propagation of ionic waves. We solve this equation in two different regimes. In the first, the maximum propagation velocity wave is found in terms of Jacobi elliptic functions. In the general case, we analyze the equation in terms of Fisher-Kolmogoroff modes with both localized and extended wave characteristics. We propose a new signaling mechanism in the cell, especially in neurons.

| S-EPMC1304047 | biostudies-literature

The proline-rich domain of fission yeast WASp (Wsp1p) interacts with actin filaments and inhibits actin polymerization.

Project description:Members of the Wiskott-Aldrich Syndrome protein (WASp) family activate Arp2/3 complex (actin-related proteins 2 and 3 complex) to form actin filament branches. The proline-rich domain (PRD) of WASp contributes to branching nucleation, and the PRD of budding yeast Las17 binds actin filaments [Urbanek AN et al. (2013) Curr Biol 23, 196-203]. Biochemical assays showed the recombinant PRD of fission yeast Schizosaccharomyces pombe Wsp1p binds actin filaments with micromolar affinity. Recombinant PRDs of both Wsp1p and Las17p slowed the elongation of actin filaments by Mg-ATP-actin monomers by half and slowed the spontaneous polymerization of Mg-ATP-actin monomers modestly. The affinity of PRDs of WASp-family proteins for actin filaments is high enough to contribute to the reported stimulation of actin filament branching by Arp2/3 complex.

| S-EPMC10023459 | biostudies-literature

Actin oligomers at the initial stage of polymerization induced by increasing temperature at low ionic strength: Study with small-angle X-ray scattering.

Project description:Using small-angle X-ray scattering (SAXS), we have studied the initial stage (nucleation and oligomerization) of actin polymerization induced by raising temperature in a stepwise manner from 1°C to 30°C at low ionic strength (4.0 mg ml-1 actin in G-buffer). The SAXS experiments were started from the mono-disperse G-actin state, which was confirmed by comparing the scattering pattern in q- and real space with X-ray crystallographic data. We observed that the forward scattering intensity I(q ? 0), used as an indicator for the extent of poly-merization, began to increase at ?14°C for Mg-actin and ?20°C for Ca-actin, and this critical temperature did not depend on the nucleotide species, i.e., ATP or ADP. At the temperatures higher than ?20°C for Mg-actin and ?25°C for Ca-actin, the coherent reflection peak, which is attributed to the helical structure of F-actin, appeared. The pair-distance distribution functions, p(r), corresponding to the frequency of vector lengths (r) within the molecule, were obtained by the indirect Fourier transformation (IFT) of the scattering curves, I(q). Next, the size distributions of oligomers at each temperature were analyzed by fitting the experimentally obtained p(r) with the theoretical p(r) for the helical and linear oligomers (2-13mers) calculated based on the X-ray crystallographic data. We found that p(r) at the initial stage of polymerization was well accounted for by the superposition of monomer, linear/helical dimers, and helical trimer, being independent of the type of divalent cations and nucleotides. These results suggest that the polymerization of actin in G-buffer induced by an increase in temperature proceeds via the elongation of the helical trimer, which supports, in a structurally resolved manner, a widely believed hypothesis that the polymerization nucleus is a helical trimer.

| S-EPMC5036667 | biostudies-literature

Polymerization and depolymerization of actin with nucleotide states at filament ends.

Project description:Polymerization induces hydrolysis of ATP bound to actin, followed by ?-phosphate release, which helps advance the disassembly of actin filaments into ADP-G-actin. Mechanical understanding of this correlation between actin assembly and ATP hydrolysis has been an object of intensive studies in biochemistry and structural biology for many decades. Although actin polymerization and depolymerization occur only at either the barbed or pointed ends and the kinetic and equilibrium properties are substantially different from each other, characterizing their properties is difficult to do by bulk assays, as these assays report the average of all actin filaments in solution and are therefore not able to discern the properties of individual actin filaments. Biochemical studies of actin polymerization and hydrolysis were hampered by these inherent properties of actin filaments. Total internal reflection fluorescence (TIRF) microscopy overcame this problem by observing single actin filaments. With TIRF, we now know not only that each end has distinct properties, but also that the rate of ?-phosphate release is much faster from the terminals than from the interior of actin filaments. The rate of ?-phosphate release from actin filament ends is even more accelerated when latrunculin A is bound. These findings highlight the importance of resolving structural differences between actin molecules in the interior of the filament and those at either filament end. This review provides a history of observing actin filaments under light microscopy, an overview of dynamic properties of ATP hydrolysis at the end of actin filament, and structural views of ?-phosphate release.

| S-EPMC6297080 | biostudies-literature

Intermittent depolymerization of actin filaments is caused by photo-induced dimerization of actin protomers.

Project description:Actin, one of the most abundant proteins within eukaryotic cells, assembles into long filaments that form intricate cytoskeletal networks and are continuously remodelled via cycles of actin polymerization and depolymerization. These cycles are driven by ATP hydrolysis, a process that also acts to destabilize the filaments as they grow older. Recently, abrupt dynamical changes during the depolymerization of single filaments have been observed and seemed to imply that old filaments are more stable than young ones [Kueh HY, et al. (2008) Proc Natl Acad Sci USA 105:16531-16536]. Using improved experimental setups and quantitative theoretical analysis, we show that these abrupt changes represent actual pauses in depolymerization, unexpectedly caused by the photo-induced formation of actin dimers within the filaments. The stochastic dimerization process is triggered by random transitions of single, fluorescently labeled protomers. Each pause represents the delayed dissociation of a single actin dimer, and the statistics of these single molecule events can be determined by optical microscopy. Unlabeled actin filaments do not exhibit pauses in depolymerization, which implies that, in vivo, older filaments become destabilized by ATP hydrolysis, unless this aging effect is overcompensated by actin-binding proteins. The latter antagonism can now be systematically studied for single filaments using our combined experimental and theoretical method. Furthermore, the dimerization process discovered here provides a molecular switch, by which one can control the length of actin filaments via changes in illumination. This process could also be used to locally "freeze" the dynamics within networks of filaments.

| S-EPMC3390885 | biostudies-other

ADF/Cofilin Accelerates Actin Dynamics by Severing Filaments and Promoting Their Depolymerization at Both Ends.

Project description:Actin-depolymerizing factor (ADF)/cofilins contribute to cytoskeletal dynamics by promoting rapid actin filament disassembly. In the classical view, ADF/cofilin sever filaments, and capping proteins block filament barbed ends whereas pointed ends depolymerize, at a rate that is still debated. Here, by monitoring the activity of the three mammalian ADF/cofilin isoforms on individual skeletal muscle and cytoplasmic actin filaments, we directly quantify the reactions underpinning filament severing and depolymerization from both ends. We find that, in the absence of monomeric actin, soluble ADF/cofilin can associate with bare filament barbed ends to accelerate their depolymerization. Compared to bare filaments, ADF/cofilin-saturated filaments depolymerize faster from their pointed ends and slower from their barbed ends, resulting in similar depolymerization rates at both ends. This effect is isoform specific because depolymerization is faster for ADF- than for cofilin-saturated filaments. We also show that, unexpectedly, ADF/cofilin-saturated filaments qualitatively differ from bare filaments: their barbed ends are very difficult to cap or elongate, and consequently undergo depolymerization even in the presence of capping protein and actin monomers. Such depolymerizing ADF/cofilin-decorated barbed ends are produced during 17% of severing events. They are also the dominant fate of filament barbed ends in the presence of capping protein, because capping allows growing ADF/cofilin domains to reach the barbed ends, thereby promoting their uncapping and subsequent depolymerization. Our experiments thus reveal how ADF/cofilin, together with capping protein, control the dynamics of actin filament barbed and pointed ends. Strikingly, our results propose that significant barbed-end depolymerization may take place in cells.

| S-EPMC5505867 | biostudies-literature

Mechanism of actin polymerization revealed by cryo-EM structures of actin filaments with three different bound nucleotides.

Project description:We used cryo-electron microscopy (cryo-EM) to reconstruct actin filaments with bound AMPPNP (?,?-imidoadenosine 5'-triphosphate, an ATP analog, resolution 3.1 Å), ADP-Pi (ADP with inorganic phosphate, resolution 3.1 Å), or ADP (resolution 3.6 Å). Subunits in the three filaments have similar backbone conformations, so assembly rather than ATP hydrolysis or phosphate dissociation is responsible for their flattened conformation in filaments. Polymerization increases the rate of ATP hydrolysis by changing the positions of the side chains of Q137 and H161 in the active site. Flattening during assembly also promotes interactions along both the long-pitch and short-pitch helices. In particular, conformational changes in subdomain 3 open up multiple favorable interactions with the DNase-I binding loop in subdomain 2 of the adjacent subunit. Subunits at the barbed end of the filament are likely to be in this favorable conformation, while monomers are not. This difference explains why filaments grow faster at the barbed end than the pointed end. When phosphate dissociates from ADP-Pi-actin through a backdoor channel, the conformation of the C terminus changes so it distorts the DNase binding loop, which allows cofilin binding, and a network of interactions among S14, H73, G74, N111, R177, and G158 rearranges to open the phosphate release site.

| S-EPMC6410863 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data